White Springs TV on IA7

[WyldCherry]

Yep already planning on that.just waiting for the rain to go away.is Amc 1 to far a distance apart to get that.I seen some KET channles there.since I live in KY.anyways thought why not if I can

 

[Keith Brannen]

Yep already planning on that.just waiting for the rain to go away.is Amc 1 to far a distance apart to get that.I seen some KET channles there.since I live in KY.anyways thought why not if I can

AMC 1 is too far away (20 degrees away from G10R). The most I have tried for is 10 degrees off centre (AMC3 and IA5) and while I was able to get all transponders on AMC3 there were some that were very weak. I moved IA5 off centre by at least 2 degrees (and then re-pointed the dish at it) which moved the AMC3 LNB to about 8 degrees off centre. While there was minor signal loss off of IA5, there was a greater increase in signal strength on AMC3, and the weak transponders became fine for viewing. (See attached photo for current setup.)

Plus, the KET channels are Digicipher 2 so you wouldn't be able to get them.

 

[WyldCherry]

bummer

 

[GaryPen]

Does anybody else think the White Springs picture is a little soft? Or, could it be my receiver and/or TV?

 

[drhydro]

The pic on white springs is not as good as it could be.

 

[iafirebuff]

I noticed it has improved a bit. It is not so "choppy" like when an old movie projector skipped

 

[GaryPen]

Good. I thought maybe the problem was on my end.