You're doing it wrong

Status
Please reply by conversation.

Panavision

SatelliteGuys Pro
Original poster
Jan 23, 2007
283
2
St. Louis Park, Minnesota
I've had my Fortec 1.2m dish for a few years. And during that time, I've thought the performance was okay at best. The other day I was going through the FTA equipment review section to see what others thought of the dish. Iceberg's review was informative and insightful. Mostly, it was eye-opening, however, because it made me realize that I've had my LNB holder on the wrong way!

Here's how I had my LNB before
photo-9.JPG



Here's how it SHOULD be
Screen shot 2012-09-11 at 8.42.10 PM.png


I've got this dish dedicated for 103w. The maximum quality on NBC was 77%. Sometimes the picture would break up if the quality got down to 70%. Now, I'm getting NBC at 85%. I guess there's always something new to learn. Either that, or follow the instructions.
 
I've done this forever and am always learning something.
 
Reminds me of a service call I just did recently. The Glorystar lnb was not skewed at all! I don't think they got all their channels in. Previous tech did not do it right. Also seen a Dish 500 close to me for a while not have any skew set on it.
 
maybe the larger dish helped bring them in even with the compensated LNB setup

PLEASE LOG IN TO GET RID OF THESE ADS!
 
Status
Please reply by conversation.

Is 97W G19 12152 H 20000 On?

Question about mounting a mast for a motorized dish

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)