is this included with free install?

[Lkr]

He put a wall plate in, but no gangbox. As far as I'm concerned, a wall plate isn't $49

 

[raoul5788]

He put a wall plate in, but no gangbox. As far as I'm concerned, a wall plate isn't $49

It does seem JUST a bit steep!

 

[Tyralak]

He put a wall plate in, but no gangbox. As far as I'm concerned, a wall plate isn't $49

Wall plates are like $2! *shakes head* I work for Dish, and we're EXPECTED to put wall plates on. No charge to customer.

 

[Slick Vic]

all we are required to do is put a bushing on the outside with some slack on the cable for the drip loop, wall plate on the inside but screwed to drywall with plastic mollies. Sorry but we dont carry and probably never will never carry low voltage boxes. Hell its bad enough getting what we get now.

 

[raoul5788]

all we are required to do is put a bushing on the outside with some slack on the cable for the drip loop, wall plate on the inside but screwed to drywall with plastic mollies. Sorry but we dont carry and probably never will never carry low voltage boxes. Hell its bad enough getting what we get now.

Putting in a regular work box takes about 5 minutes. I just did one about 2 hours ago.

 

[Tyralak]

Putting in a regular work box takes about 5 minutes. I just did one about 2 hours ago.

I really hate those things. They can easily bend the cable sharply at the fitting on the inside of the plate. The open backed ones are ok, but not the enclosed ones.

 

[Slick Vic]

Putting in a regular work box takes about 5 minutes. I just did one about 2 hours ago.

If its provided by the customer then I'll be more than happy to put one in for them. If not, then I'll do the latter. It's the Mastec way.