OTHER Help Setting up KU dish for G19

[primestar31]

I finally was able to work on it again today, I took the dish off and put a level to the pole it mounts on. The pole was about 3-4 degrees off level. Reset the dish and accounted for the pole. Finaly got G19. Then used it as a reference for SES 3 and picked it up, but not getting the radio now...

Well, you are getting closer though...

 

[JBW]

Any suggestions for getting the radio stations off SES 3?

 

[SDA_FL_USA]

MEGA
Link to a list of the radio channel names and the PID's
Has to be manually entered they will not scan in. Use 8191 as the PCR.

 

[SDA_FL_USA]

Forgot this Add them to transponder 12145 v 20000 3/4

 

[JBW]

Awesome, thank you. I thought I was going crazy. Do I have to manually enter for NBC and COZI also?

 

[FTA4PA]

I finally was able to work on it again today, I took the dish off and put a level to the pole it mounts on. The pole was about 3-4 degrees off level. Reset the dish and accounted for the pole. Finaly got G19. Then used it as a reference for SES 3 and picked it up, but not getting the radio now...

Glad to hear you are lined up now!

Do I have to manually enter for NBC and COZI also?

No, if the dish is pointed properly and the signal is strong enough those should come in fine during a blind scan. If not, try entering the frequency for them manually and doing a transponder scan.

 

[SDA_FL_USA]

What's Playing Now - DBS/Encompass LE/LE2/SR
Link to show what is playing now and last 10 songs played.