Search results for query: *

Update Bought a new power supply and swapped it with the one I'm currently using but to my disappointment, it is still flashing on and off. Not knowing a lot about electronics-seems it has another issue. I'm guessing a capacitor but that is beyond my pay level. Plus a wind storm last night...

Neither one. I purchased an Amiko and am using it. Also a good receiver

I'm not sure what you're asking but I bought it originally to upgrade my BUD at my cabin. It was a nice receiver but I did not have internet access there to ask questions so I went with an Amiko instead.

I never thought about a defective power supply. I don't have another one with the same specs so it'll have to wait. Thanks for the suggestions. This site is a great go-to place for answers on the hobby

I decided to reconnect my Edision OS mio 4K to my dish after it has sat in the closet for a few years. I was able to get it operational when I first bought it in 2019 but went with another receiver at that time because of my slow learning curve. So today I decided to give it another shot and...

I will give 99 a try. I know my Ku needs a tweak after a strong monsoon storm 2 years ago - just haven't done it. Speaking of 99 C band - miss the programs that just disappeared a couple years ago. Guess they dropped the TVRO and switched to streaming.

LPB used to have 3 good, strong channels - tricky to tune but solid when you got them locked. Not lately. Must be something going on because all of them are MIA. CNN is strong but LPB is just gone. Oddly, one of the CNN feeds today (12-5-24) had the Bourbon Street cam. It was raining...

Does anyone have a problem with time setting on Amiko 265? I read that it will automatically update time if it's on the correct channel/satellite. Is there a go to channel to do this? Have H-H Ku setup. Thanks

Thanks for the replies - really. I ordered a new receiver today. Time for this one to collect dust. Too much for me...

Maybe, could be - who knows? I thinks I may have bitten off more than I can chew with this receiver. It's a tough one to figure out.

First by trying to add a sat to my Edision mio and messing up the USALS and Second: by posting in the wrong forum. but here's my question. I tried adding 101w Ku to my receiver and now the USALS is outta sync. Is there a simple fix to reset the USALS? I have the North American skin whatever that...

the USALS is off. Have Edision North American edition and since I'm having a terrible time trying to figure out what went wrong and to go back to where I started, I thought I'd come to SatelliteGuys fr help. Question: How do I delete 101w Ku and resync USALS. Thanks in advance

There's a definite learning curve for me with this new receiver. I need to remember that it's computer based and SDA_FL_USA - I rebooted the receiver and all the channels are back in full HD. Thanks!

I haven't tried to reboot but will today and I don't know anything about running it through vlc?

Edision Mio receiver will not decode(?) the HD video on ABC Mux 91 West? SD is okay also missing on NBC feeds and LPB HD intermittently. I am wondering if it is in the feed and not the receiver. Is anyone else having this problem? Thanks...

Thanks to Brian Gohl for the one on one instructions to get me started with the set up. I have turned the corner on programming and after a small tweek on the dish, the sats are scanning in just fine. It's an amazing receiver with a sharp interface I can only describe as near studio experience...

I have switched to this new receiver and it's quite a bit different from others I've had. I've scanned in 78W and want to use USALS for the rest of the arc but I'm having problems getting it to move to the next sat to the west. I'm hoping a downloaded manual would help. Thanks

It was amazing to watch that many channels come in. They are 99 percent scrambled and the rest are like preview channels but just to watch it populate the guide was something! With this hobby - it's definitely the little victories that make it worthwhile. Thanks again!

OMG!!! It worked! USALS worked - what a help. Thanks so much Jim. I owe you a beer - a BIG ONE!!!

I did find the sat with the Sky network - 78 w. I will try to use the usals. thanks much

I don't know what USALS is. I do know I started back at it this morning and somewhere way to the east, I found a sat with over 600 channels including some SKY channels in the clear but it's in Spanish. Just trying to find a few sats to watch like I had before. Does anyone know where this sat is...

I am not sure about the settings of the lnb. It's been up there awhile and I just set it to something that worked, universal. As far as the power supply of the old micro - do you mean the plug in transformer? The unit still turns on but it is stuck between sats. So I'm not the sharpest knife in...

Yes. They are: 11501 H 20000, 12351 H 20000, 11501 V 20000 and 12351 V 20000. Thank you

To make a long (very long) story short, I'm trying to program a replacement receiver for my dead MicroHD. I don't have a sat finder other than the dinky, little squaw box and I'm stuck. I was having no luck until I gave up for the day and put the ladder away, etc. Anyway, when I came back in...

I moved to a new sat 103 I think and it was jerky . It stopped and started then just stopped. I moved it back to 99 and after some playing with the thing it made it back to 99 and I just kept it there. I was reading an old post where one person thought it might be the reed switch on the...