Search results for query: *

I have phone cable and internet,the phone and internet work great,on the cable the digital channels are great but the (analog) are really snowy I almost cant see them,so I took a tv out to the pole and it is still the same.Does anyone know If I can do anything to make it better.I have tried a...

I hooked my sonicview8000 through the loop out of the azbox so I can blind scan on the 8000,but it does not work right,it only gets the frq. that the az is on.Is there anyway to make it work right,I have a geosat pro with two outputs but I have one going to the bed room and I dont want to have...

I have installed a 10 sami for one sat on the eastern side of the arc,I can hit all the way over to I805C What I want to know is if you could only point to one sat on the eastern half of the arc which on would you set it on.

I was lucky enough to come across this 10 ft sami,A 1 meter primestar dish and 30 ft of rohn tower,the man told me to take it all, so two of my friends and I took it down.The lnb's are gone from the dish but that is no big deal,and it does not have an actuator,it came from an old radio...

I want to run my satellite and antenna through diplexer's for one cable run into the house,but I have an antenna signal booster,so does that mean I need diplexers with two power pass ports intead of one.I have an eagle aspen rotor that the power to operate the rotor runs off of the coaxial,so I...

I just picked up a CS8000 for $100.00 dollors,but it has no remote but it does work,I tried some universal remotes and they did not work,so I will get one from ebay.Has anyone tried the universal remote on ebay that says it will work for coolsat,viewsat,and many others?While I were searching on...

does anyone know why they send a di-electric plate with the bsc 421?I am guessing it is for linear sats,but I want to be sure before installing it.I could not open the pdf file at dmsi web site.

does anybody know how to hook up an external HD to the brighthouse receiver,my brother has alot of football on his dvr and he needs extra storage,I know it can be done but I cant find any info.any help would be very appreciated.

has anyone seen this receiver before?It even has a built in harddrive.It says it is dvb-s2,mpeg4,hd,and it has blind scan.But I cant find a place to only buy one,the web site is wholesale and you must buy 1,000 of them for 45.00 dollors each.Please let me know if it might be a good receiver.

has anyone seen this new receiver from viewsat,it says it does dvb s2,but of course no blind scan.I dont know how to copy the info but you can go to the viewsat site and read it.

My brother and I picked this dish up for free today.It is a 10.5 foot RAYDX.Is this a well known dish,because I have never heard of this brand before.It's a very well built dish,everything is aluminum and stainless steal.I have a 10 foot channel master and it look's cheap built compared to this...

I am very glad to see the thanks button,this will cut down on people posting just to say thanks.Very good Idea.

I have read this term alot but how do you identify one of these,I want to know so when I am dish hunting I will know what to look for,are they solid or the mesh type,I hear they are a good find,any info would be great:confused:

I have tried searching the forums,but it says the search phrase is to short,so does anyone have directions on how to install the dual c band lnbf from sat av.I know the basics,but should the zero on the lnbf be pointed to my true south sat ,I will be installing it this weakend and just wanted to...

has anyone had any luck with the dual c-band lnbf fom satelliteav,I want a dual c-band lnbf with voltage control,would this be a good choice.I already have a ku band set up on a 39"dish,so all i need on the 10' dish is c-band.Any other dual cband lnbf's around or is this the only one. Thanks for...

has anyone used the c-band dual lnbf fron sat av,I am looking for a dual c band lnbf,will this be a good choice,I have a ku dish set up already so all I want on the 10 footer is c-band,I have a chaparrel c band lnb now but I want a voltage controled lnbf,I get very good signal on it now,but my...

I have a 10 ft. mesh bish(don't know the name) the actuator from the motor to the end is 24" but my dish will not go to the east side of the arc.it will only go to 85w.and to the west it goes to 125w.If I loosen the mount and move the dish to the east then I can get the east arc and not the...

I see there are some diamond 9000 hd pvr's on ebay for around 150.00 dollors,that includes shipping,do you think this is a good deal.I have read the reviews,it seems like a good unit,the only thing holding me back is it does not have blind scan and that is a major draw back for fta.I noticed in...

I am looking for a remote to operate a uniden ust 7700,I have searched on google but could not find anything.Sorry if this is in the wrong place.

I found two dishes saturday,one is 7 ft the other is 10,the 10 ft has a broken motor,but the 7 works fine,they both have eagle aspen lnb's,c-band only,I have found channels with the 7 ft,should i stay with it or get another motor for the 10 ft,I am going to get two more next weekend and see if...

I just found this uniden videocipherII descrambler equipped ust 7700,can I hook this up through the loop out of my ultra.I do not have a c-band dish yet,so is there anything I can use it for and how to hook it up,I don't have the remote but it does have some buttons on the front.

would some of you veteran fta'ers tell me if this site is accurate,orbit magazine.com/wild feeds,I have been to it but I am not sure what sat is t5,my sat list has different names,and without the location I dont know what sat to move to.

my vs ultra has a selection on the blind scan for freq. step,it ranges from 5 to 16,what is the difference,and does it matter what step to use.

I dont know if this has ever been mentioned on here,but yahoo mail has a thing called freecycle,there should be one in your area.You can post a wanted,or you can offer things and see if anyone needs the things you are offering,it is all free you cant post things for sale or to buy,I posted I...

I set up an sg2100 yesterday and all went great,I had almost every sat in my list with great quality,I scanned the channels,the motor would change to the proper sat when I changed the channel,last night I turned the power off and went to sleep,this morning I got up and when I turned on the power...