Search results for query: *

  1. billyboy_1

    Where did METV go ?

    I found it. Coax been in the ground a long time finally went bad. Got new ran and half way buried before dark.
  2. billyboy_1

    Where did METV go ?

    Yeah I got it now. Not sure what happened. Thanks.
  3. billyboy_1

    Where did METV go ?

    I had METV on SES=1 but it's not there now. Did they move to a different bird?
  4. billyboy_1

    Camping and the East & West sats

    Yeah I knew the antenna would receive the sats just wasn't sure why we weren't seeing very many channels. Thanks for the info...
  5. billyboy_1

    Camping and the East & West sats

    The dish 500 was seeing at least the 61.5 for sure. It was giving us a few channels but only a few.
  6. billyboy_1

    Camping and the East & West sats

    I was pretty sure it was the 311. It was showing a few channels but not very many. Thanks for the reply.
  7. billyboy_1

    Digital Breakup on 101 C Band

    Plus the down link sites are using larger antennas so a weaker signal might not be causing an issue.
  8. billyboy_1

    Camping and the East & West sats

    I have been taking both a East & West 1000 Turbo HD dishes with me going camping. I just aim one of them at which ever sky I have a shot at. last weekend the guy next to me had a 500 and a 311 rec. He had never tried the East birds. I skewed the 500 and popped it on East sats but the 311 only...
  9. billyboy_1

    Dead Openbox I think

    The Titanium Satellite ASC1 positioner is a fantastic unit. The Manhattan STB is nice as well.
  10. billyboy_1

    Digital Breakup on 101 C Band

    Nice and solid on Manhattan 1997 now.
  11. billyboy_1

    Digital Breakup on 101 C Band

    GX6601 Chipset
  12. billyboy_1

    Digital Breakup on 101 C Band

    Still breaking up on both a Manhattan and a Amiko. Good on a X2 mini though.
  13. billyboy_1

    Digital Breakup on 101 C Band

    Both decades and H & I are extremely low..not watchable on Manhattan and Amiko but still hanging good on X2 mini.
  14. billyboy_1

    Digital Breakup on 101 C Band

    Wonder what gear the stations are using receiver wise ? Probably 6 meter antennas or something along that size.
  15. billyboy_1

    Digital Breakup on 101 C Band

    Did not think to check any differences. The Q level is still unstable on the Manhattan. An Amiko on the same system is better than last night where it had no signal at all. The X2 mini has never faltered.
  16. billyboy_1

    Digital Breakup on 101 C Band

    A fresh scan this morning has Hero's back at 3951 with a signal at 86 and Q at 70% but still lots of breaking up on a Manhattan DJ-1997. However a X2 mini premium on the same system never has lost Hero's and has no breaking up.
  17. billyboy_1

    Digital Breakup on 101 C Band

    Having the same issues here mostly on hero's and decades. Little to no signal.
  18. billyboy_1

    Having problems reading ASC1 Positioner

    SUCCESS....I had a black usb to serial converter in my shop. It worked...Thanks guys for the assist. You guys are the greatest !!!!!
  19. billyboy_1

    Having problems reading ASC1 Positioner

    Using a Dtech blue cable/converter. Loader/editor is a fresh install on one of the two computers I am using. Did a fresh install of driver provided. I am afraid if I do a reset and still can't read/write to the unit I will have to manually re-program it I then won't have sat names. So far no...
  20. billyboy_1

    Having problems reading ASC1 Positioner

    When trying to write new file to unit it states "error in receiving data restart box and pc software.
  21. billyboy_1

    Having problems reading ASC1 Positioner

    I am using the serial cable that was shipped with the unit. I had no problems before so that's why I am confused as to why it won't read now. The unit requires me to power cycle it after I attempt to read it just like it did when I could read it.
  22. billyboy_1

    Having problems reading ASC1 Positioner

    Well having the very same issues on another computer that has a serial port. I can't seem to locate the driver CD. Is there another way to obtain that driver?
  23. billyboy_1

    Having problems reading ASC1 Positioner

    I'm using the serial to USB adapter cable that came with it. It has worked before on this same computer. The port does show good in devices and printers. I have a laptop that has the serial port I can try.
  24. billyboy_1

    Having problems reading ASC1 Positioner

    Hey friends I am not having any luck trying to read my ASC1 Positioner. It has 20140903.01 F/W and I am using loader/editor v1.8. The tabs all just grey out when I ask it to read from device and it does not read. The com port is correct and I do have to reset the unit after trying to read it...
  25. billyboy_1

    X2 Premium Mini HD Review

    I'm not sure about the other than "equipment review" posts on this unit. seems like it would be a subject just left alone IMO as far as anything other than what this site promotes which is strictly FTA. Sort of like saying a firearm manufacturer should be boycotted due to the fact some people...