Social Feed

satcustomer

Last reply Sep 24, 2007 · posted in DIRECTV General Forum

Compensation for the Directv Lies?

I was on hold for 20 minutes before finally speaking with a CSR. Then, surprise, surprise, I got disconnected and had to call back. Then I was hold another 20 minutes or so before speaking with another CSR who then transferred me to a CSR in the "Retention Department". For all of the lies and delays, they offered me a credit of $9.99 per month for a year (the cost of the current HD package). How have you been compensated?

91 Replies · 16310 views

Load Replies (91) Reply Legacy View

paulsown

Sep 23, 2007

I am starting to see that if D* came to your house, took a dump on your lawn, and then killed all your roses your response would be "they must have had a good reason for it................."

It is not just about this specific date or that specific date, its that the waiting is getting old and about RESPECT for their customers, nothing more...............

I did not just buy my HD t.v at Wal-mart last weekend, I have had an HD t.v for quite some time, and have been waiting for these channels much longer than others.

Tell Directv that you will pay your bill this spring and then don't do it. See how fast they will show their loyalty to you for all the loyalty you show to them.

I don't know what any body's connection to Directv on here is, but apply some critical thinking skills and look at this from an OUTSIDERS P.O.V. Through all the speculation and all the b.s., what have they done except repeat bloated misleading advertising that has been rammed down our throats ALL YEAR? No new programing, no new nothing, while others have left them in the dust. They launch a satellite, late. A now the thing won't work. I can imagine the discussion. "The damn thing don't work. What should we do now? I know, we'll change the website in the middle of the night and nobody will know................."

I give up on the CS thing, I can see that many of you do not know anyone who works in this field and will not realize that these people can only tell customers what the company allows them to say. They don't just make things up. Most everything is a poorly written script that must be read almost verbatim. You know that recording that says "calls may be monitored and recorded..................." They almost all are recorded and many are reviewed for accuracy. So, if a CS person tells you something, its not a rumor or speculation, someone has told them they can release that OFFICIALLY.

Directv has been misleading, and they have sold subscriptions based upon things that they still cannot deliver. And they don't have the respect to say why....................

I think the best part about all this is that most of you defending Directv have to call people names or say that they need to grow a pair........

That shows the level of intelligence that is present with these people.........

Enough said.

ssamick

Sep 23, 2007

about time

paulsown said:
I am starting to see that if D* came to your house, took a dump on your lawn, and then killed all your roses your response would be "they must have had a good reason for it................."

It is not just about this specific date or that specific date, its that the waiting is getting old and about RESPECT for their customers, nothing more...............

I did not just buy my HD t.v at Wal-mart last weekend, I have had an HD t.v for quite some time, and have been waiting for these channels much longer than others.

Tell Directv that you will pay your bill this spring and then don't do it. See how fast they will show their loyalty to you for all the loyalty you show to them.

I don't know what any body's connection to Directv on here is, but apply some critical thinking skills and look at this from an OUTSIDERS P.O.V. Through all the speculation and all the b.s., what have they done except repeat bloated misleading advertising that has been rammed down our throats ALL YEAR? No new programing, no new nothing, while others have left them in the dust. They launch a satellite, late. A now the thing won't work. I can imagine the discussion. "The damn thing don't work. What should we do now? I know, we'll change the website in the middle of the night and nobody will know................."

I give up on the CS thing, I can see that many of you do not know anyone who works in this field and will not realize that these people can only tell customers what the company allows them to say. They don't just make things up. Most everything is a poorly written script that must be read almost verbatim. You know that recording that says "calls may be monitored and recorded..................." They almost all are recorded and many are reviewed for accuracy. So, if a CS person tells you something, its not a rumor or speculation, someone has told them they can release that OFFICIALLY.

Directv has been misleading, and they have sold subscriptions based upon things that they still cannot deliver. And they don't have the respect to say why....................

I think the best part about all this is that most of you defending Directv have to call people names or say that they need to grow a pair........

That shows the level of intelligence that is present with these people.........

Enough said.[/quo

talos4

Sep 23, 2007

I've kibitzed long enough...

and YES I have read the thread, since the start and even thew in my own lousy attempt at a joke early on, (sorry about that) so don't throw that card out.

The problem is not just that it did not work this time, that it has been "soon" for quite some time, and they will give us no other information. I have been waiting for these channels for 12 months+, and I think its time to stop the excuses.

You mean like no Satellite in orbit?

They have been promising the channels for a year or more, just because it took them this long to launch the thing does not mean that "it's only been a month". They hyped and hyped and have blown past deadlines and are now rushing to meet the "end of the year" so that they are not accused of false advertising.

Past deadlines? Which ones?

You mean the one that said, (paraphrasing here) by the end of 2007 we will have the capacity of up to 150 national HD channels.

If I set a date for something, I know IN ADVANCE that I can, without a doubt in my mind, meet that time line with time to spare. I don't wait till the last minute, and rush around and throw up my hands when things don't work. I understand that things go wrong, but you PLAN for that.

I set starting dates for million $$ projects that customers have signed contracts for my company to perform. I am a project manager it's what I do for living.

True story

So I have set my starting date and that day arrives, our equipment is on site, all personnel are on site, all materials have arrived and are staged. site logistics have been worked out, pre-construction have been held, even the location of the porta-johns was planned, the customer and many members of board of directors are there to watch the first activity of the project.

Guess what? No joy, It's raining, I cannot tear the roof off of a building that houses millions of dollars worth of telephone network switchgear and computers.

So does the customer complain? "You lied, you said you would start today, we've been planning this project for over a year, we have alot of money invested in this project"

NO!!!!

He does not the job started in the rain, So how do I plan ahead for that?

A date must be set, otherwise nothing gets done, If we cannot work on that day,

ANOTHER DAY is selected and we move on, hoping the next date is a day nice enough to work.

This happens, ALL THE TIME in my industry.

If D* did indeed throw the switch and the system belched,

I WANT them to take the time to make sure the next time they try, it doesn't happen again. A week, 2 weeks, I don't care, as long as in the end they get it right.

I think the best part about all this is that most of you defending Directv have to call people names or say that they need to grow a pair........

That shows the level of intelligence that is present with these people.........

Enough said.

"most of you" is pretty strong statement.

Dersion and mocking are very poor responses in a debate on either side.

cr0mag

Sep 23, 2007

When you say enough said... Is that a promise?

paulsown,

For the life of me, I can't figure out why you won't let this alone. If you told me that you were doing something in September, and it wasn't complete by the 23rd, I might get concerned and then watch and see if you followed through by the end of the month.

As for your claim of defending D*, you have taken me out of context... I'm not defending anyone intentionally. I'm trying to make the point that today is September 23, not October 1st, and therefore D* hasn't broken any promise. I'll be upset if they don't deliver by 10/01, and then I'll make my calls to complain.

And in case you are wondering, no, I didn't buy my HD tv last week, nor did I just sign up for D*. Nor did I tell you to grow a pair of anything. (Nor do I care if you need to or not!)

As for D* (or anyone else) taking a dump on my lawn, that is a ridiculous comparison to this situation and doesn't even merit a discussion.

There... I said it... You can be upset for me calling your comparison ridiculous.

If you are getting upset by all of the replies to your post (and not just smirking quietly at the $%&^ you are stirring up), then close your browser and move on.

Mtnmike

Sep 24, 2007

paulsown said:
I am starting to see that if D* came to your house, took a dump on your lawn, and then killed all your roses your response would be "they must have had a good reason for it................." It is not just about this specific date or that specific date, its that the waiting is getting old and about RESPECT for their customers, nothing more............... I did not just buy my HD t.v at Wal-mart last weekend, I have had an HD t.v for quite some time, and have been waiting for these channels much longer than others.
Tell Directv that you will pay your bill this spring and then don't do it. See how fast they will show their loyalty to you for all the loyalty you show to them.
I don't know what any body's connection to Directv on here is, but apply some critical thinking skills and look at this from an OUTSIDERS P.O.V. Through all the speculation and all the b.s., what have they done except repeat bloated misleading advertising that has been rammed down our throats ALL YEAR? No new programing, no new nothing, while others have left them in the dust. They launch a satellite, late. A now the thing won't work. I can imagine the discussion. "The damn thing don't work. What should we do now? I know, we'll change the website in the middle of the night and nobody will know................." I give up on the CS thing, I can see that many of you do not know anyone who works in this field and will not realize that these people can only tell customers what the company allows them to say. They don't just make things up. Most everything is a poorly written script that must be read almost verbatim. You know that recording that says "calls may be monitored and recorded..................." They almost all are recorded and many are reviewed for accuracy. So, if a CS person tells you something, its not a rumor or speculation, someone has told them they can release that OFFICIALLY. Directv has been misleading, and they have sold subscriptions based upon things that they still cannot deliver. And they don't have the respect to say why....................I think the best part about all this is that most of you defending Directv have to call people names or say that they need to grow a pair........ That shows the level of intelligence that is present with these people.........Enough said.

One has to wonder what ranting, raving, babbling, nonsensical childish immature prattle will flow from his keyboard after October 1st (along with his trademark periods)................

whiteyanderson

Sep 24, 2007

paulsown said:
I give up on the CS thing, I can see that many of you do not know anyone who works in this field and will not realize that these people can only tell customers what the company allows them to say. They don't just make things up. Most everything is a poorly written script that must be read almost verbatim. You know that recording that says "calls may be monitored and recorded..................." They almost all are recorded and many are reviewed for accuracy. So, if a CS person tells you something, its not a rumor or speculation, someone has told them they can release that OFFICIALLY.

while i can agree with you to a point that if you call CS they are acting as a mouthpiece for a company; you're off on other things here. i lived in CSR heaven for 28 years in san antonio before moving out here to california last march. i went to night school majoring in network engineering, repaired and built cusom pc's on the side and made ends meet... as a CSR. i've worked as a CSR as an tech support person for a major southern DSL provider (think southeast), at a major bank (think recently merged with bank one), and an HD provider (think voom)!.

1- most CSR's are not even direct (no pun intended) employees of said companies. they are employees of a contractor who have high rise buildings, with normally 2 rooms per floor dedicated to a different company per room. it is easier and cheaper for a company to contract out this work than to build it's own CSR department.

2- it is amazing what i have heard other CSR's tell customers. and even more amazing at how fast these things become "official floor rumors". and still yet even more amazing for supervisors to perpetuate the rumors. all it is, is an easy way to reduce the abuse from customers and get them off the phone. remember, many CSR's are given incentives for having low call times. the faster you are gone the better.

3- almost all the calls being monitored is a huge myth. if you are calling a contracted CSR there is probably 1 quality control person per 50- 200 employees, who can field up to 2000 calls a day. there is NO way that every call can be monitored it is a HUGE amount of calls. the average QC person is lucky to listen to 100 maybe 200 calls in an 8 hour shift. the way they handle this shortcoming is to "sit" on a particular CSR"s calls for a few hours at a time. HOWEVER, there is always a "tip off" that you are being monitored. at some companies if you are being monitored, there is an echo in your headset. others a blinking icon. we weren't supposed to know this but, we did. and if you get the unlucky monitoring tip off, you are going to be spot on. until you know the monitoring is off. this method still leaves HUGE amounts of calls that never get heard.

4- being a CSR is an abusive job in MOST places. you take hell from customers, your boss and the turnover is high. many CSR's are kids in high school or college, retirees, people wanting to earn a few extra bucks, or quite honestly- people down on their luck. that doesn't imply they are stupid, i have met many, many, intelligent people in my days as a CSR. but, bottom line is:

usually at many of these places, turnover is SO high that the hiring standards are really, really bent. the one exception i found was the bank.

rumors fly, customers are lied to, and most CSR's do not care and will do what it takes to shut you up and get you off the phone.

thank god, i don't have to do that job anymore.

oh and one other thing, if you call at a late hour or on a day when Americans don't want to work (like a holiday), you're probably going straight to mumbai baby.

View all replies (91)

SuperDish_Fan23

Last reply 37 minutes ago · posted in DISH Network Support Forum

Its crazy how the ViP922 is so rare for no reason.

Why are ViP922s So rare? like its crazy how ebay has none, i checked everywhere, also, i got a ViP222k now, which is actually activated!

29 Replies · 746 views

Load Replies (29) Reply Legacy View

slow_poke_pete

Yesterday at 1:41 PM

remembers when ATT had stores and leased home phones

Reactions: AZ. and charlesrshell

dishstaller

Yesterday at 3:14 PM

My Wife was recently in an antique store and saw a rotary desk phone and it had one of those sticker overlays that had a business listed with phone number under each number on the dial. She looked closer and it had my old Radio Shack listed under the 8...she bought it. Pretty cool keepsake. Back then I rented vhs movies as well so I had it listed as Radio Shack / Movie Gallery and then the phone number.

Reactions: Foxbat, Almighty1, navychop and 1 other person

Almighty1

Yesterday at 8:53 PM

I remember this in the news too...

$14,000 spent on rented rotary phone

A widow rented a rotary dial telephone for 42 years, paying what her family calculates as more than $14,000 for a now- outdated phone.

www.nbcnews.com

Reactions: charlesrshell

Bobby

Yesterday at 9:21 PM

Almighty1 said:
I remember this in the news too...

$14,000 spent on rented rotary phone

A widow rented a rotary dial telephone for 42 years, paying what her family calculates as more than $14,000 for a now- outdated phone.

www.nbcnews.com

That is a misnomer. In the old days you subscribed to telephone service. That included the telephone line and one telephone. An extension cost $1 a month extra. So that $14,000 over 42 years was for the service not the leased telephone. There is no way they paid $28 a month for 42 years for a leased telephone.

Reactions: charlesrshell, AZ., Mr Tony and 1 other person

HIFI

37 minutes ago

anybody remember this disaster ?

Reactions: dishdude

View all replies (29)

meStevo

Lifetime Supporter

Last reply Yesterday at 10:53 PM · posted in The Sports Section

NFL 2026-2027 Season

Schedule drops tomorrow. Mandatory mini camps in June. Hall of Fame game August 6th.

126 Replies · 2148 views

Load Replies (126) Reply Legacy View

Reactions: Jimbo and dfergie

rvvaquero

Tuesday at 11:33 AM

Jerry Jones and Jimmy Johnson had an argument about who was responsible for the dynasty building of the early 90's Cowboys.

The rest of us figured it out in about 3 years, Jerry has had over 30 years but still can't admit it. It's all he lives for, to show everyone he can put together a winner. I don't think he can. His kids only know what he taught them.

Reactions: Mike0616, dfergie and b4pjoe

HipKat

Wednesday at 8:10 PM

Week Six Balls and Goats and WTH is Going On in The NFL??

Browns. 1st place in the North. Yup. Believe it or not

Chiefs. Undefeated.

Titans. Won a game ! .... Colts I know, but still.

Saints. Won a game after a while.

Steelers. Having the same season they always have. They somehow find wins on their way to an unceremonial 1st round exit. Mike Tomlin is proud.

Cards. Won a game without scoring a single touchdown

Broncos. How they manage to win games with the dogshit offense they have should be studied.

Bears. Caleb's back and so is their mojo.

Goats

NFC East. For the 2nd straight week no team from this clown show of a division won a game. Eagles are cooked without Hurts. Who's not that good anyway. Commanders suck, Dallas is well ..... Dallas and the Giants have no QB.

Ravens. Lamar is out (as usual). But still. Losing to the Browns is never ok.

Chargers. Still can't win.

Rams. So much for the powerhouse team. They are 2 games under .500

Seattle. Lost to the offenseless Broncos.

Reactions: Howard Simmons, meStevo and Mike0616

Yespage

Yesterday at 9:15 AM

rvvaquero said:
Jerry Jones and Jimmy Johnson had an argument about who was responsible for the dynasty building of the early 90's Cowboys.

The rest of us figured it out in about 3 years, Jerry has had over 30 years but still can't admit it. It's all he lives for, to show everyone he can put together a winner. I don't think he can. His kids only know what he taught them.

Johnson built it, but without the Herschel Walker trade, it never happens.

Reactions: b4pjoe

b4pjoe

Yesterday at 9:53 AM

Yespage said:
Johnson built it, but without the Herschel Walker trade, it never happens.

Jerry made himself General Manager after he bought the team but make no mistake Jimmy engineered that trade. As well as a lot of others at the time.

Reactions: rvvaquero, osu1991 and Yespage

rvvaquero

Yesterday at 11:50 AM

Jimmy Johnson is a football guy. Jerry Jones is a marketer (hustler).

When I see a football player get a 15 yard penalty for unsportsmanlike conduct (like taunting) in a close game, I often wonder what he was thinking. Was he thinking, I'm doing everything I can to make this a better team and help win a championship? Or, was he saying to himself, I want everyone to notice how great I am?

Johnson inspires one, Jones the other.

Reactions: b4pjoe and Mike0616

meStevo

Yesterday at 10:53 PM

View: https://x.com/AdamSchefter/status/2113438192913588676?s=20

Reactions: Mike0616 and osu1991

View all replies (126)

SatZach

Yesterday at 10:46 PM · posted in The Chit Chat Club

Hello again

I haven't posted in almost 17 years. Over the air, sat, offline, anything-but-the-internet is still one of my avid pursuits. Been playing with offline tv viewing and offline web browsing. I have great appreciations for this site still being here. It's so hard to find public communities that haven't sold out to social media company.

0 Replies · 15 views

Replies Reply Legacy View

SkyWatcher57

Pub Member / Supporter

Last reply Yesterday at 10:25 PM · posted in Free To Air (FTA) Discussion

KOQIT receivers

Hello folks, well my luck ran out last week with a nasty thunderstorm and after 39 years here, finally took a hit. Now, the FTA receivers I had for some years worked great until now. Recently picked up a fairly cheap receiver, online, KOQIT and seems to be good, but for the life of me, I cannot get the HDMI output to work with 3 of my Samsung monitors. I can hook it up to my Samsung TV and its HDMI input and it works fine. The 2 receivers I lost also worked fine with them, so am I going crazy? anyone have come across this or have any suggestions? And, since this is a somewhat cheap unit but works, what is everyone out there using for receivers these days? without breaking the bank? I enjoy watching FTA TV, so I will invest more if needed, what is a really good, detailed unit these days. I'm so use to watching a few of them HD channels. Right now I'm down to composite hookups, yuck! Any help or info would be greatly appreciated. Thanks Frank

46 Replies · 1120 views

Load Replies (46) Reply Legacy View

(((Garyd)))

Sep 7, 2026

SkyWatcher57 said:
Hello folks, well my luck ran out last week with a nasty thunderstorm and after 39 years here, finally took a hit. Now, the FTA receivers I had for some years worked great until now. Recently picked up a fairly cheap receiver, online, KOQIT and seems to be good, but for the life of me, I cannot get the HDMI output to work with 3 of my Samsung monitors. I can hook it up to my Samsung TV and its HDMI input and it works fine. The 2 receivers I lost also worked fine with them, so am I going crazy? anyone have come across this or have any suggestions? And, since this is a somewhat cheap unit but works, what is everyone out there using for receivers these days? without breaking the bank? I enjoy watching FTA TV, so I will invest more if needed, what is a really good, detailed unit these days. I'm so use to watching a few of them HD channels. Right now I'm down to composite hookups, yuck! Any help or info would be greatly appreciated. Thanks Frank

Take the cover off, show me pics of the board of the bad one and also the bottom of the board. I'm an old hardware electronics tech plus a satellite dealer; I fixed a lot of FTA and regular receivers. I may be able to fix it for you. And yes, they got hit by lightning; it's best to email me the pics at diamondsatellite@snet.net or call me at 203-232-8888. I give you a 50-50 chance of fixing it; I do have spare parts. my phone is a fliptop phone
Gary

Reactions: navychop

navychop

Sep 10, 2026

More room for the return of the Plague & Pestilence?

slow_poke_pete

Sep 10, 2026

SkyWatcher57 said:
Hello folks, well my luck ran out last week with a nasty thunderstorm and after 39 years here, finally took a hit. Now, the FTA receivers I had for some years worked great until now. Recently picked up a fairly cheap receiver, online, KOQIT and seems to be good, but for the life of me, I cannot get the HDMI output to work with 3 of my Samsung monitors. I can hook it up to my Samsung TV and its HDMI input and it works fine. The 2 receivers I lost also worked fine with them, so am I going crazy? anyone have come across this or have any suggestions? And, since this is a somewhat cheap unit but works, what is everyone out there using for receivers these days? without breaking the bank? I enjoy watching FTA TV, so I will invest more if needed, what is a really good, detailed unit these days. I'm so use to watching a few of them HD channels. Right now I'm down to composite hookups, yuck! Any help or info would be greatly appreciated. Thanks Frank

a good surge protector will help to.

Reactions: SkyWatcher57

SkyWatcher57

Sep 11, 2026

(((Garyd))) said:
Take the cover off, show me pics of the board of the bad one and also the bottom of the board. I'm an old hardware electronics tech plus a satellite dealer; I fixed a lot of FTA and regular receivers. I may be able to fix it for you. And yes, they got hit by lightning; it's best to email me the pics at diamondsatellite@snet.net or call me at 203-232-8888. I give you a 50-50 chance of fixing it; I do have spare parts. my phone is a fliptop phone
Gary

Hi Gary, still working on getting you those

SkyWatcher57 said:
Hi Gary, just saw this, ok, I'll grab some pics tomorrow and post them. thx

Still working getting you those pictures, nice weekends means yard work and fall prep, thanks

Reactions: (((Garyd)))

k4otl

Yesterday at 10:09 PM

Anybody know how to add "hidden" audio channels like for 101 W Ku or 105W C band on these recvr's? I've exported the database file but don't have anything that will read or edit it.

cyberham

Yesterday at 10:25 PM

For 105W C, you scan in the Westwood tp normally. Then select the audio channel you want. Not necessary to manually enter. On 101W, you must manually enter.

View all replies (46)

Scott Greczkowski

Staff member HERE TO HELP YOU! Cutting Edge

Last reply Yesterday at 10:13 PM · posted in The Chit Chat Club

Song Name Game Part 3!

Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne

Get it?

An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....

68578 Replies · 2676033 views

Load Replies (68578) Reply Legacy View

Reactions: c-spand

long_time_Dish

Yesterday at 8:02 PM

One Way Street - Streets

RaiderPower

Yesterday at 8:04 PM

Working My Way Back To You - The Spinners

Reactions: long_time_Dish

long_time_Dish

Yesterday at 8:45 PM

Find A Way To My Heart - Phil Collins

Reactions: dishstaller

dishstaller

Yesterday at 9:32 PM

Heart of Glass - Blondie

Reactions: long_time_Dish

long_time_Dish

Yesterday at 10:13 PM

Magazine - Heart

View all replies (68578)

TRG

Pub Member / Supporter

Last reply Yesterday at 10:06 PM · posted in The Chit Chat Club

Prescription drug costs

Now that I'm retired, obviously I have different health care insurance. I take 2 prescriptions. With my old insurance I didn't have to pay for either of them, now I do. It's not a huge amount but it led me to dig a little into the cost of prescription medications. I have been using Walgreens for the longest time. But what I found was that Walgreens price is 4.8 times more for one of my prescriptions and the other is 2.3 percent more compared to the lowest price pharmacy. If you pay for prescription medications you might want to have a look at trumprx and see if you can get a lower price.

https://trumprx.gov/

Screenshot from 2026-10-22 15-43-53.webp

Screenshot from 2026-10-22 15-23-34.webp

11 Replies · 78 views

Load Replies (11) Reply Legacy View

Reactions: telstar_1

comfortably_numb

Yesterday at 6:09 PM

I run them through several different providers to see who has the lowest cost

Usually it's Walmart or Sam's + GoodRx

Also...

Homepage of Mark Cuban Cost Plus Drugs

Mark Cuban Cost Plus Drug homepage. Provides safe, affordable medicine or medication with transparent low prices.

www.costplusdrugs.com

You can also price them through the CareCard and WellRx apps.

Sometimes Amazon Pharmacy is cheapest.

Reactions: TRG

telstar_1

Yesterday at 7:48 PM

TrumpRx?!?

I went on Medicare recently (not an "advantage" plan) and my prescriptions at HyVee were very low out of pocket. The clerk said she was putting them on "Good Rx".

osu1991

Yesterday at 8:12 PM

I take 10mg Rosuvastatin (Crestor). I was paying $34 for a 90day supply at Walgreens last year when I was on Blue Cross. My Blue Cross premiums were going up to $1800 a month this year, so I switched to an Ambetter Bronze plan (I think that's a Cigna company) for $825 a month. I now have a $40 copay for doctors visits which is fine as I usually only see them once or twice a year, so a huge cost savings. My Rosuvastatin was going to go up to around $90 for a 90 day supply at Walgreens and even more at CVS or one of the local family pharmacies. Ordering online thru my insurance portal from Express Scripts it's $0.74 for a 90 day supply.

Reactions: TRG, Mr Tony and Jimbo

comfortably_numb

Yesterday at 8:18 PM

telstar_1 said:
TrumpRx?!?

Scripts arrive in a gold paper sack.

Reactions: Yespage and meStevo

dishstaller

Yesterday at 9:39 PM

comfortably_numb said:
Usually it's Walmart or Sam's + GoodRx

I'm fortunate and don't take any medications. A couple years ago I had to take some antibiotics and used the GoodRx app. Went to Walmart and the person behind the desk knew me and told me to just buy them outright....the GoodRx price was a LOT higher. She said they aren't supposed to tell customers when they see they are being screwed.

Reactions: navychop

navychop

Yesterday at 9:49 PM

That's ok. I probably take enough for the two of us.

God knows what Bobby takes. Maybe so much they count as a meal?

Reactions: AZ.

Bobby

Yesterday at 10:06 PM

navychop said:
That's ok. I probably take enough for the two of us.

God knows what Bobby takes. Maybe so much they count as a meal?

Actually I take just 2 prescriptions, Atorvastatin and Lisinopril. They cost me $6 each for 100 pills. Next year that will be nothing.

Reactions: AZ. and TRG

View all replies (11)

Bruce

Supporting Founder Lifetime Supporter

Last reply Yesterday at 9:34 PM · posted in Internet Television (IPTV) Discussion Forum

How things have changed

I was reading this article

Cable TV ‘cord-cutters’ became the majority in 2022

The steady decline of cable and broadcast television, and the rise of streaming services, reached a sort of inflection point over the past year. Last summer, for the first time, streaming ser…

thehill.com

That said this-
Last summer, for the first time, streaming services like Netflix and Amazon Prime claimed the largest share of the television viewing audience, surpassing both cable and broadcast TV. Streaming captured 34.8 percent of July viewers, according to Nielsen data, compared to 34.4 percent for cable and 21.6 percent for broadcast.

And then, sometime in the second half of 2022, cord-cutters became the majority. The share of cable and satellite television subscribers dipped to 48 percent, according to a report from Samba TV, a television technology company.

Now I do not consider those with YTTV and the likes, Cord Cutters, but they still do not have Traditional Cable/Satellite delivered Live TV, so I decided to do the math.

There are, now, 129 Million Households in the United States.

In 2015, there were 100 Million Cable/Sat Subscribers , no streaming Live TV Service.

Today, there are 66 Million Live TV subscribers, including Cable, Satellite and Streaming.

Roughly, Streaming Live TV has 14 Million subs including all of them.

So that means, Cable/Satellite now has, roughly, 51 Million Households

So in just 8 years, lost 49% of their subscribers and by the end of this year, expected sub count to be, roughly, 45 million households.

That means a total loss of 55% since 2015 at the end of 2023.

But out of 129 Million households, 45 million will mean only 35% will get Cable/Satellite Delivered Live TV by the end of 2023.

Imagine what 2024 will be like.

881 Replies · 71427 views

Load Replies (881) Reply Legacy View

Reactions: MikeD-C05

Bruce

Yesterday at 12:11 PM

Sony is discontinuing it's last 4K disc player, Panasonic has been rumored to be doing the same, the end of physical media is unfortunately, about to happen.

Bad News For Blu-ray Fans: Sony Has Stopped Making a Popular Player | Cord Cutters News

Sony has discontinued its final standalone UHD Blu-ray player, the UBP-X700/K, ending shipments of the device with no successor model announced. The move, first spotted by Japanese website Kunkoku.jp and confirmed through the status of the product on Sony’s own website, marks the company’s...

cordcuttersnews.com

Reactions: Foxbat, ncted and navychop

dishstaller

Yesterday at 2:54 PM

Bruce said:
Sony is discontinuing it's last 4K disc player, Panasonic has been rumored to be doing the same, the end of physical media is unfortunately, about to happen.

Hate to hear that. If you don't physically have something in your hand, you don't really own it.

Reactions: navychop

Bruce

Yesterday at 4:29 PM

dishstaller said:
Hate to hear that. If you don't physically have something in your hand, you don't really own it.

Even a physical disc purchase is considered a license, just extremely harder to pull access vs digital.

But once new players are no longer sold and older players quit working, that takes care of the access to your library.

See LaserDiscs for one example of that happening.

ncted

Yesterday at 4:42 PM

Bruce said:
Sony is discontinuing it's last 4K disc player, Panasonic has been rumored to be doing the same, the end of physical media is unfortunately, about to happen.

Bad News For Blu-ray Fans: Sony Has Stopped Making a Popular Player | Cord Cutters News

Sony has discontinued its final standalone UHD Blu-ray player, the UBP-X700/K, ending shipments of the device with no successor model announced. The move, first spotted by Japanese website Kunkoku.jp and confirmed through the status of the product on Sony’s own website, marks the company’s...

cordcuttersnews.com

I am so done with Sony on so many levels. This is just one small piece of it.

Jimbo

Yesterday at 8:50 PM

ncted said:
I am so done with Sony on so many levels. This is just one small piece of it.

I Love my Sony equipment

dishstaller

Yesterday at 9:27 PM

Bruce said:
just extremely harder to pull access vs digital.

And dangerous if you get my drift.

navychop

Yesterday at 9:34 PM

Jimbo said:
I Love my Sony equipment

That's an odd name for it.

Reactions: Jimbo

View all replies (881)

TvMind

Last reply Yesterday at 9:13 PM · posted in C-BAND Satellite Discussion

SES 1 101° W Horizontal "Issues" a.k.a "I want my M(e)TV"

Howdy folks long time no write.

Issue(s): Horizontal transponders (esp. Weigel mux) breakup/mosaic/sputtering audio, JTV less so (but received perfectly up until a month or so ago.
Vertical is fine (Daystar). Up until recently couldn't even get any signal on Weigel Mux but JTV was perfect.

What I did to improve things: A slight westward move improved reception but only slightly (approx 72 on the micro HD, sorry no dB to post). I removed the 3-way C-Band splitter and used a 2-way to get a 1-2 db signal gain ( the power port goes to the Startrak - the micro HD doesn't have enough juice ! (1st clue) even after swapping the switching power supply it came with with a heftier linear 12 V supply (less RFI too !).
I have had issues with the uHD before signal breaking up that a reboot would clear up (clue #2 = dying tuner?) - FYI, I reinforced the IF input and removed all flux from the pcb completely with a Flux Removal Pen (MG Chemicals Cat No. 4140-P) which definitely makes a huge difference.

I went outside and pushed and pulled reflector slightly and no improvement. Pole (actually tower in yard - the neighbours love me..NOT) is plumb, checked with carpenters level. Dish was last peaked in 2017 or so, after overhauling 24" Von Weise, new Acme, fresh grease, etc. Focal length, f/d ratio etc meticulously adjusted. One panel has a tear so planning to repair that this weekend when my cousin comes over ( to help me out (old guy here) forecast calls for sunshine.

What has changed: My utility company has installed new high tension line poles (one smack dab in the middle of 101°W target! But they put it in last year and reception (of JTV (HOR) at least) was fine, BUT when they came out to transfer the wires over this year from the old (sawed in half) pole that's about when the troubles started (coincidence?), but again Daystar (VER) was fine. I always had this pole in the light of sight of 101° before with no issues. (fyi my zenith sat 74° is unobstucted, but can't test)

In the meantime Weigel mux is trying to break in MOSTLY in LATE at night (less cell usage?) (audio not video except for a frame here or there) so don't know what has changed with this mux which suddenly "woke up". I have never had to fuss with dish moves on this satellite ( the slightest move +/- motor clicks loses lock, wheres normally on C-band I can go significantly wider east or west and still have a strong signal ( have these gone "spot beam" or narrower somehow and what is the slight difference in Az listed on Lyngsat to 100.9° affect things ( isn't that the declination i.e. requiring a tweak of declination?).

Long story short (too late, ha), if I had another DVB-S2 box to try and / or a newer more stable PLL lnb ( I have been meaning to upgrade many a time but never got arround to it) I could determine if it's my antiquated receiving equipment, or my dish/feed alignment ( doubtful as it tracks everything from 55 °W to 133 ° W nicely.) or the dreaded 5G! (BUT only on HOR and not VER?).
I read another post where the OP (with his smaller 7.5 footer) played around with the illumination to peak desired transponder and reduce qrm on interfering/ stronger xpndrs (even on 103° W). So will play with that too - and cut away the RG-6 a and pull up a fresh section with new PPC and coax Seal. Open the throat cap see if any cobwebs are there and check servo operation (also changed in last maintence 10 years ago).

Finally, this will probably be the last chance I get to play with the BUD from the looks of it (providers leaving, auctioning off rest of spectrum imminent above 4.0 Ghz, and to keep the peace with neighbours so it would be nice to have that mux back for the long, cold and dark winters to comfort this old man before I call it quits and buy a VHF/UHF/FM Yagi and get MeTV, H&I from my Vermont local stations (checked at a friends today and they come in nicely - except ABC) .
Only one guy in town (Montreal) I may be able to get a receiver or PLL lnb from to try (RPS Sat) so hopefully with elimnate that as a possible culprit. Be nice to pick up a cheap or used PLL lnb to try w/o 5G BPF (money is tight )

Like others I couldn't care less about "tv" (well maybe just a liitle or a lot) it's the challenge that excites me , I can get MeTV other ways OTA (no pirate crap).

So what do you guys (and gals) think ?. p.s. I don't have a spectrum analyzer and there are def/ cell towers nearby (half a Km or so away).
Oh and time permitting will hammer out dings too and wire damaged mesh on one section for an extra dB or two. Hesitate to touch Declination, Elevation and pole mount but will play around with those a little too... Why is this mux for finicky suddenly ?(8psk, 5/6 fec, beamwidthetc.. man wish they went back to VER I think everthing would be fine! For the engineers out here does 5G QRM affect one poliarization (HOR) more than another (VER)? I understand the strong interference swamps out the input mixer/local oscilator in the hapless old C-band lnb (I think it at time affect KU too esp. LPB on 101°W KU - incidentally thos were weak or "gone' but are back almost at the time MeTV improved..hmm Terrestrial interference?

Any thoughts or suggestions ( cheap or free solutions please) greatly appreciated. Cheers.

p.p.s. Micro HD can't display Decades and Toons but records them fine so I can watch on another box/media player (Ali chip set issue). Another reason to upgrade.

Anybody interested in a nice C/KU system free ? (for next Spring/Summer 2027)

[Sami 10' mesh, Corotor II+, Eagle Aspen (very old) C-band lnb, Norsat Ku lnb, Channel Master C/Ku (H/V) switch, Startrak 400 Analog receiver w/ motor control, Geosat uHD DVD-S2, CW600S for Mpeg-2]

12 Replies · 481 views

Load Replies (12) Reply Legacy View

Titanium

Oct 14, 2026

Our LNBFs are integrated with the feedhorn and no KU option. Maybe install an inline waveguide BPF such as:

www.ebay.com/itm/158077455896
www.ebay.com/itm/960059145385
www.ebay.com/itm/158007483799

brownsfan1

Monday at 9:22 PM

TvMind said:
Howdy folks long time no write.

Issue(s): Horizontal transponders (esp. Weigel mux) breakup/mosaic/sputtering audio, JTV less so (but received perfectly up until a month or so ago.
Vertical is fine (Daystar). Up until recently couldn't even get any signal on Weigel Mux but JTV was perfect.

What I did to improve things: A slight westward move improved reception but only slightly (approx 72 on the micro HD, sorry no dB to post). I removed the 3-way C-Band splitter and used a 2-way to get a 1-2 db signal gain ( the power port goes to the Startrak - the micro HD doesn't have enough juice ! (1st clue) even after swapping the switching power supply it came with with a heftier linear 12 V supply (less RFI too !).
I have had issues with the uHD before signal breaking up that a reboot would clear up (clue #2 = dying tuner?) - FYI, I reinforced the IF input and removed all flux from the pcb completely with a Flux Removal Pen (MG Chemicals Cat No. 4140-P) which definitely makes a huge difference.

I went outside and pushed and pulled reflector slightly and no improvement. Pole (actually tower in yard - the neighbours love me..NOT) is plumb, checked with carpenters level. Dish was last peaked in 2017 or so, after overhauling 24" Von Weise, new Acme, fresh grease, etc. Focal length, f/d ratio etc meticulously adjusted. One panel has a tear so planning to repair that this weekend when my cousin comes over ( to help me out (old guy here) forecast calls for sunshine.

What has changed: My utility company has installed new high tension line poles (one smack dab in the middle of 101°W target! But they put it in last year and reception (of JTV (HOR) at least) was fine, BUT when they came out to transfer the wires over this year from the old (sawed in half) pole that's about when the troubles started (coincidence?), but again Daystar (VER) was fine. I always had this pole in the light of sight of 101° before with no issues. (fyi my zenith sat 74° is unobstucted, but can't test)

In the meantime Weigel mux is trying to break in MOSTLY in LATE at night (less cell usage?) (audio not video except for a frame here or there) so don't know what has changed with this mux which suddenly "woke up". I have never had to fuss with dish moves on this satellite ( the slightest move +/- motor clicks loses lock, wheres normally on C-band I can go significantly wider east or west and still have a strong signal ( have these gone "spot beam" or narrower somehow and what is the slight difference in Az listed on Lyngsat to 100.9° affect things ( isn't that the declination i.e. requiring a tweak of declination?).

Long story short (too late, ha), if I had another DVB-S2 box to try and / or a newer more stable PLL lnb ( I have been meaning to upgrade many a time but never got arround to it) I could determine if it's my antiquated receiving equipment, or my dish/feed alignment ( doubtful as it tracks everything from 55 °W to 133 ° W nicely.) or the dreaded 5G! (BUT only on HOR and not VER?).
I read another post where the OP (with his smaller 7.5 footer) played around with the illumination to peak desired transponder and reduce qrm on interfering/ stronger xpndrs (even on 103° W). So will play with that too - and cut away the RG-6 a and pull up a fresh section with new PPC and coax Seal. Open the throat cap see if any cobwebs are there and check servo operation (also changed in last maintence 10 years ago).

Finally, this will probably be the last chance I get to play with the BUD from the looks of it (providers leaving, auctioning off rest of spectrum imminent above 4.0 Ghz, and to keep the peace with neighbours so it would be nice to have that mux back for the long, cold and dark winters to comfort this old man before I call it quits and buy a VHF/UHF/FM Yagi and get MeTV, H&I from my Vermont local stations (checked at a friends today and they come in nicely - except ABC) .
Only one guy in town (Montreal) I may be able to get a receiver or PLL lnb from to try (RPS Sat) so hopefully with elimnate that as a possible culprit. Be nice to pick up a cheap or used PLL lnb to try w/o 5G BPF (money is tight )

Like others I couldn't care less about "tv" (well maybe just a liitle or a lot) it's the challenge that excites me , I can get MeTV other ways OTA (no pirate crap).

So what do you guys (and gals) think ?. p.s. I don't have a spectrum analyzer and there are def/ cell towers nearby (half a Km or so away).
Oh and time permitting will hammer out dings too and wire damaged mesh on one section for an extra dB or two. Hesitate to touch Declination, Elevation and pole mount but will play around with those a little too... Why is this mux for finicky suddenly ?(8psk, 5/6 fec, beamwidthetc.. man wish they went back to VER I think everthing would be fine! For the engineers out here does 5G QRM affect one poliarization (HOR) more than another (VER)? I understand the strong interference swamps out the input mixer/local oscilator in the hapless old C-band lnb (I think it at time affect KU too esp. LPB on 101°W KU - incidentally thos were weak or "gone' but are back almost at the time MeTV improved..hmm Terrestrial interference?

Any thoughts or suggestions ( cheap or free solutions please) greatly appreciated. Cheers.

p.p.s. Micro HD can't display Decades and Toons but records them fine so I can watch on another box/media player (Ali chip set issue). Another reason to upgrade.

Anybody interested in a nice C/KU system free ? (for next Spring/Summer 2027)

[Sami 10' mesh, Corotor II+, Eagle Aspen (very old) C-band lnb, Norsat Ku lnb, Channel Master C/Ku (H/V) switch, Startrak 400 Analog receiver w/ motor control, Geosat uHD DVD-S2, CW600S for Mpeg-2]

I had the EXACT same problem happen to me with 101w, MeTV mux (Weigel). Working great when about 3 weeks ago I started to get the pixelating, especially at night. Sometimes Jewelry TV would also do it, sometimes not. Tweaked my dish. I have a Titanium 240 feed with the 5G filter 4.0-4.2 band pass. Every other satellite is working fine. Something on their end for sure. Power reduction? My signal seems fine like always. Running a Winegard 8.5 ft dish using a GT Media UHD V8. I'm sure my receiver isn't maybe sensitive enough for lower signal levels. Frustrating here too. I'm in the Canton, Ohio area. Thanks!

arlo

Tuesday at 10:22 AM

To me it looks like all of the intelligent things to diagnose the problem 'on the cheap' are being done.
I have my own thoughts of lnbf's using an external filter between the feed and coax. It would be cool to see what Brian could add.
Do his units have the filter before the actual LNA chip in the circuit? In other words, signal is focused at the lnbf throat. The probes for h & v polarity send the signal to.......filtering......then to the lna IC......
Or probes, lna, then filtering. Makes sense to trap the bad stuff before amplification to me.

On the cheap sometimes leaves questions. Enosat and El Bandido both use dvb-s pci cards and TBS USB receivers.
With those, and software. Signal analysis becomes sort of easy. Or tapping into your coax with a dc pass splitter, decoupling capacitor, and using a spectrum analyzer. Tuning across the LO band. Finding signal spikes. Digging deep.

Still making my decision on a (most probably) TBS PCIe tuner card. But I have tapped into my coax with my ancient but quite impressive HP spectrum analyzer and tinysa.
I don't have 5G interference so far that I know of. But have my suspects because I'm only able to snag signal from 131W in the winter when the leaves drop. But out of curiosity do scan it in the fall. And seem to be getting a signal that 'shouldn't' be there and a scan shows no channels. Far as I got.

An idea pops up to rig up an LNBF on a stick. Along with the tinysa and power supply and do some rogue signal searches. War Driving, of sorts. But. I wouldn't think that a chinabox, firmware based receiver would be of much help.
From what I see scanning across the frequency band. 5G cell transmission is always on and is very wide spectrum.
Whether anyone is actually using talking, texting, watching stupid human tricks on YouTube Makes no difference. The RF is there. So why would a C Band setup come and go? And what if you dumped the corotor and went modern voltage controlled polarity?

Another thought. Since you've learned the optimal position to place the scalar to illuminate out to the dish rim. And peaked the feed. There's most of a roll of aluminum flashing out in my garage that would most definitely wrap around my dish perimeter. That and a bag of large binder clips from the office supply. wally world. Ideas?

brownsfan1

Yesterday at 8:23 PM

arlo said:
To me it looks like all of the intelligent things to diagnose the problem 'on the cheap' are being done.
I have my own thoughts of lnbf's using an external filter between the feed and coax. It would be cool to see what Brian could add.
Do his units have the filter before the actual LNA chip in the circuit? In other words, signal is focused at the lnbf throat. The probes for h & v polarity send the signal to.......filtering......then to the lna IC......
Or probes, lna, then filtering. Makes sense to trap the bad stuff before amplification to me.

On the cheap sometimes leaves questions. Enosat and El Bandido both use dvb-s pci cards and TBS USB receivers.
With those, and software. Signal analysis becomes sort of easy. Or tapping into your coax with a dc pass splitter, decoupling capacitor, and using a spectrum analyzer. Tuning across the LO band. Finding signal spikes. Digging deep.

Still making my decision on a (most probably) TBS PCIe tuner card. But I have tapped into my coax with my ancient but quite impressive HP spectrum analyzer and tinysa.
I don't have 5G interference so far that I know of. But have my suspects because I'm only able to snag signal from 131W in the winter when the leaves drop. But out of curiosity do scan it in the fall. And seem to be getting a signal that 'shouldn't' be there and a scan shows no channels. Far as I got.

An idea pops up to rig up an LNBF on a stick. Along with the tinysa and power supply and do some rogue signal searches. War Driving, of sorts. But. I wouldn't think that a chinabox, firmware based receiver would be of much help.
From what I see scanning across the frequency band. 5G cell transmission is always on and is very wide spectrum.
Whether anyone is actually using talking, texting, watching stupid human tricks on YouTube Makes no difference. The RF is there. So why would a C Band setup come and go? And what if you dumped the corotor and went modern voltage controlled polarity?

Another thought. Since you've learned the optimal position to place the scalar to illuminate out to the dish rim. And peaked the feed. There's most of a roll of aluminum flashing out in my garage that would most definitely wrap around my dish perimeter. That and a bag of large binder clips from the office supply. wally world. Ideas?

I did some more investigating and found I got the MeTV mux in the early hours, until about 6am then the pixelating starts. Gets worse until around 8am its totally gone. I suspect my local cell tower is ramping up traffic as the morning goes on. My Titanium feed does a super job and most everything is clear that wasn't before but this mux is aggravating! I seem to just be over the signal threshold to work until the 5G total overwhelms my system. I'm using an old 9 foot spun aluminum dish and was wondering if I went to a 12 ft dish this would solve the problem? I know bigger is better in most satellite dish related signal problems. If this is true I will be searching for a bigger dish. I like your idea of flashing put around the dish perimeter. I have some I need to dig out and try before I start ripping out my dish. Anybody have any ideas if the bigger dish would do better? Any help would be appreciated!

SDA_FL_USA

Yesterday at 9:13 PM

brownsfan1 said:
I did some more investigating and found I got the MeTV mux in the early hours, until about 6am then the pixelating starts. Gets worse until around 8am its totally gone. I suspect my local cell tower is ramping up traffic as the morning goes on. My Titanium feed does a super job and most everything is clear that wasn't before but this mux is aggravating! I seem to just be over the signal threshold to work until the 5G total overwhelms my system. I'm using an old 9 foot spun aluminum dish and was wondering if I went to a 12 ft dish this would solve the problem? I know bigger is better in most satellite dish related signal problems. If this is true I will be searching for a bigger dish. I like your idea of flashing put around the dish perimeter. I have some I need to dig out and try before I start ripping out my dish. Anybody have any ideas if the bigger dish would do better? Any help would be appreciated!

8 1/2 Foot mesh here with the c140 lnbf and a verizon 5g tower nearby. Got no issue with the Metv transponder. Are you sure you have the lnbf setup correct? When I set my c140 up I noticed it was about 1/4 to 1/2 inch pushed in closer to the dish, sticking out of the scaler ring than my old lnbf was. Thought I may have trouble with that but my signal readings are higher than they had ever been.

View all replies (12)

Former member 209992

Last reply Yesterday at 8:44 PM · posted in SatelliteGuys Support Center

Site is slooooow

For some reason, the satelliteguys.us site is loading a lot slower than usual on both Chrome on my Asus laptop and Safari on my iPhone.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.

551 Replies · 19109 views

Load Replies (551) Reply Legacy View

Reactions: charlesrshell

Scott Greczkowski

Wednesday at 11:18 AM

Just a heads up... I just patched our PHP to close the major PHP exploit announced this morning.

Now on PHP 8.4.27 (cli) (built: Oct 20 2026 00:00:00)

Reactions: dhpeeple1, BikinSwans, long_time_Dish and 6 others

harshness

Wednesday at 3:13 PM

More specifically, these:

https://www.cve.org/CVERecord?id=CVE-2026-109618

https://www.cve.org/CVERecord?id=CVE-2026-109619

A more scholarly story is here:

PHP warns admins of two critical flaws, emergency patches coming tomorrow

The PHP security team is warning administrators to prepare for emergency security updates tomorrow to address two critical vulnerabilities, as information about the flaws has reportedly leaked ahead of their scheduled disclosure.

www.bleepingcomputer.com

Reactions: Foxbat and charlesrshell

navychop

Wednesday at 3:43 PM

"WARNING Will Robinson!"

Reactions: Foxbat, Bobby, telstar_1 and 1 other person

Don in CT

Yesterday at 10:19 AM

Scott Greczkowski said:
Just a heads up... I just patched our PHP to close the major PHP exploit announced this morning.

Now on PHP 8.4.27 (cli) (built: Oct 20 2026 00:00:00)

When I heard about this exploit I was wondering how quick you would be on it.

Reactions: Foxbat and charlesrshell

Scott Greczkowski

Yesterday at 4:54 PM

Don in CT said:
When I heard about this exploit I was wondering how quick you would be on it.

12 minutes after the patch was release I had it patched.

Reactions: Foxbat, comfortably_numb, Bobby and 2 others

Foxbat

Yesterday at 8:44 PM

A.I. - Be careful what you wish for…

Reactions: navychop and charlesrshell

View all replies (551)

Lon.TV

Yesterday at 6:52 PM · posted in Lon.TV

Lithium UPS Battery Backup Review - Oupes UPS 1200 Review

Time for another AWESOME video from Lon Seidman of LON.TV!

View: https://www.youtube.com/watch?v=JhwivKnNZrw

Direct YouTube Link - Lithium UPS Battery Backup Review - Oupes UPS 1200 Review
The Official LON.TV Website
Lon on Facebook

Search

Search

Social Feed

Compensation for the Directv Lies?

Its crazy how the ViP922 is so rare for no reason.

$14,000 spent on rented rotary phone

$14,000 spent on rented rotary phone

NFL 2026-2027 Season

Hello again

KOQIT receivers

Song Name Game Part 3!

Prescription drug costs

Homepage of Mark Cuban Cost Plus Drugs

How things have changed

Cable TV ‘cord-cutters’ became the majority in 2022

Bad News For Blu-ray Fans: Sony Has Stopped Making a Popular Player | Cord Cutters News

Bad News For Blu-ray Fans: Sony Has Stopped Making a Popular Player | Cord Cutters News

SES 1 101° W Horizontal "Issues" a.k.a "I want my M(e)TV"

Site is slooooow

PHP warns admins of two critical flaws, emergency patches coming tomorrow

Lithium UPS Battery Backup Review - Oupes UPS 1200 Review