Social Feed
I saw Sharpee's thread about a Traxis with C-band, but didn't want to hi-jack his thread, so I started this one.
I bought a used Traxis 3500 from Stogie last week and hooked it up as a slave to my 4DTV, partly because I wanted to get used to using it, and partly because I wanted to confirm how well I have that dish set up.
Got everything hooked up and started setting up the Traxis. It is a little different than what I am used to, but I have now learned my way around the setup screens pretty well.
The Traxis likes diseqc 1.0 if you only have 4 ports on the diseqc switch. It doesn't like 1.1 unless you have uncommitted and committed switches.
It also requires that you have LNB on even if the LNBs are being powered by another receiver. With LNB off, the diseqc functions don't work, and you get C-Band signals coming through the Ku side.
I am having another issue with horizontals being scanned in as verticals, and verticals being scanned in as horizontals. A lot of duplicates.
I think that has more to do with the position of the feed-horn. I have mine set at the 10:30 - 4:30 position maybe even leaning towards the 9:00 - 3:00 side which works great with the 4DTV since it has control of the polarity and skew and you can adjust it any way it needs to be. I think, and this is just a thought, that the Traxis looks at it like it is extra skew and reacts accordingly.
I think I will probably have to make the feed-horn a little more towards the 12:00 - 6:00 position to satisfy any DVB receiver that doesn't control polarity. More like an 11:30 - 5:30 position. That would probably eliminate all duplicates.
The problem could be eliminated perhaps if the Traxis had a method to scan one polarity at a time which it doesn't, at least I couldn't find it. To me that is a serious drawback in it's firmware and I will be addressing that with Tim at DMSI.
I got the Traxis for one major reason. It has a pin-point accurate and rock solid meter along with fast and accurate blind scanning. I am getting tired of unhooking my Pansats to go up to the roof to fine tune dishes. I have plenty of old analog receivers that I can take up there to move the dish with the Traxis slaved to it for that job. I might get a spare VBox for that job too.
If all goes as planned, this unit will be slaved to the spun aluminum dish when finished and the pc tuner slaved to it for blind scanning and recording. It will be very easy to unhook and hook back up. Hopefully in another 6 months I will have the Fortec Passion, or the Pansat 9200 for that job, and the Traxis will only be used to fine tune dishes.
On the plus side, the dish seems to be tuned pretty well. It actually works better with Ku than with C-Band. I also was able to input a strong C-Band transponder for IS-9 (PAS9) at 58W and scanned in the channels there. I was surprised to see some actual stuff for the 4DTV there too.
I am not going to make any changes to the dish until I see whether I get the solid Birdview that I am "tracking in the hunt". If I get the solid BV, the perfed BV will be sitting in this spot.
If you think I am incorrect about the duplicate channel issue, or have a different thought, please let me know?
Fred
I bought a used Traxis 3500 from Stogie last week and hooked it up as a slave to my 4DTV, partly because I wanted to get used to using it, and partly because I wanted to confirm how well I have that dish set up.
Got everything hooked up and started setting up the Traxis. It is a little different than what I am used to, but I have now learned my way around the setup screens pretty well.
The Traxis likes diseqc 1.0 if you only have 4 ports on the diseqc switch. It doesn't like 1.1 unless you have uncommitted and committed switches.
It also requires that you have LNB on even if the LNBs are being powered by another receiver. With LNB off, the diseqc functions don't work, and you get C-Band signals coming through the Ku side.
I am having another issue with horizontals being scanned in as verticals, and verticals being scanned in as horizontals. A lot of duplicates.
I think that has more to do with the position of the feed-horn. I have mine set at the 10:30 - 4:30 position maybe even leaning towards the 9:00 - 3:00 side which works great with the 4DTV since it has control of the polarity and skew and you can adjust it any way it needs to be. I think, and this is just a thought, that the Traxis looks at it like it is extra skew and reacts accordingly.
I think I will probably have to make the feed-horn a little more towards the 12:00 - 6:00 position to satisfy any DVB receiver that doesn't control polarity. More like an 11:30 - 5:30 position. That would probably eliminate all duplicates.
The problem could be eliminated perhaps if the Traxis had a method to scan one polarity at a time which it doesn't, at least I couldn't find it. To me that is a serious drawback in it's firmware and I will be addressing that with Tim at DMSI.
I got the Traxis for one major reason. It has a pin-point accurate and rock solid meter along with fast and accurate blind scanning. I am getting tired of unhooking my Pansats to go up to the roof to fine tune dishes. I have plenty of old analog receivers that I can take up there to move the dish with the Traxis slaved to it for that job. I might get a spare VBox for that job too.
If all goes as planned, this unit will be slaved to the spun aluminum dish when finished and the pc tuner slaved to it for blind scanning and recording. It will be very easy to unhook and hook back up. Hopefully in another 6 months I will have the Fortec Passion, or the Pansat 9200 for that job, and the Traxis will only be used to fine tune dishes.
On the plus side, the dish seems to be tuned pretty well. It actually works better with Ku than with C-Band. I also was able to input a strong C-Band transponder for IS-9 (PAS9) at 58W and scanned in the channels there. I was surprised to see some actual stuff for the 4DTV there too.
I am not going to make any changes to the dish until I see whether I get the solid Birdview that I am "tracking in the hunt". If I get the solid BV, the perfed BV will be sitting in this spot.
If you think I am incorrect about the duplicate channel issue, or have a different thought, please let me know?
Fred
12 Replies
·
2454 views
Well I tried the switch-over from H to V while scanning, and I am getting pretty good at doing that and it seems to work with no duplicates.
One thing that I found that I like with the Traxis, is that I can dump all the TPs and channels after scanning very easily so it is possible to scan for "all" and dump everything if nothing is found real quick.
The picture quality is good and switches from PAL to NTSC seamlessly.
Fred
One thing that I found that I like with the Traxis, is that I can dump all the TPs and channels after scanning very easily so it is possible to scan for "all" and dump everything if nothing is found real quick.
The picture quality is good and switches from PAL to NTSC seamlessly.
Fred
Why are ViP922s So rare? like its crazy how ebay has none, i checked everywhere, also, i got a ViP222k now, which is actually activated!
0 Replies
·
2 views
My year was almost up and we got the new bill for a year of service for $ 360.00 insane sat radio is becoming like cable!!! i logged into my acct and hopped onto chat and told the rep that i wanted to cancel. she understood my concern and went quiet for a few minutes. i figured that she was canceling my service. she comes back and said that she seen that i have been a sub since 07 and then offers me the same package for a year for 120.00 with taxes and fee's!!! i grabbed it. after almost having a stroke 
237 Replies
·
10978 views
Mrs. Foxbat reminded me it's that time of the year to do the Cancel Tango
The A.I. agent appears to be better than in the past. It got to the acceptable price quicker than previous years, no human operator involved. $5/mo and I still have over $50 in SiriusXM credit from my FordPartner benefits.
The A.I. agent appears to be better than in the past. It got to the acceptable price quicker than previous years, no human operator involved. $5/mo and I still have over $50 in SiriusXM credit from my FordPartner benefits.
Staff member
HERE TO HELP YOU!
Cutting Edge
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68527 Replies
·
2672588 views
Staff member
HERE TO HELP YOU!
Stumbled across this ... http://www.gaspricewatch.com/USGas_ZipSearch.asp
I found no local prices, although it did show stations at my location...
Added these to this post...
USA National Gas Temperature Map
State By State Gasoline Taxes
Gas Buddy
Ethanol Free Stations
I found no local prices, although it did show stations at my location...
Added these to this post...
USA National Gas Temperature Map
State By State Gasoline Taxes
Gas Buddy
Ethanol Free Stations
5552 Replies
·
460615 views
Here in Indiana, the difference between Regular and Premium is usually a dollar, but some charge even more:
Ok, I'm bored .... actually - to be more precise - I'm bored of eating the same rotation of 9 or 10 meals that are currently my "go-to" meals. My wife works the long hours - I work from home as and when i feel like it ... which means i generally do most of the cooking ... and so by default - i also make out the shopping list ...
We cook at home 5 or even 6 nights a week - but we always seem to fall back on the same old tried and tested "quick and easy but tastes ok" meals. Week in week out.
Pot Roast - mash and Peas.
Spaghetti
Chicken Pasta in cheese sauce.
Curry & rice
(these are some of mine)
Now it's not that I'm not adventurous in the kitchen ... I'll try anything once or twice ... but we all do it. Unless your name is Martha Stewart or Rachel Ray .. we all eventually fall back on our 8-10 favorite "meals"
So i thought - if we shared some of our own go-to meals with each other ... we might be able to add a few "new" ones to our own arsenal of meals.
So again - I ask you ...
What's for dinner tonight ?
Please give me something new to add to my rotation ... its our weekly shop tomorrow - so i want to pull together a few idea's and try and eat a meal each day next week that I've never had before .. or at least something that is not on my current "go-to" meal plan.
What meal do you always seem to fall back on in your house ? Maybe its something that I've never tried or not had in a while. I need inspiration !! I've got a blank shopping list in front of me - and nothing sounds good .. HELP !
We cook at home 5 or even 6 nights a week - but we always seem to fall back on the same old tried and tested "quick and easy but tastes ok" meals. Week in week out.
Pot Roast - mash and Peas.
Spaghetti
Chicken Pasta in cheese sauce.
Curry & rice
(these are some of mine)
Now it's not that I'm not adventurous in the kitchen ... I'll try anything once or twice ... but we all do it. Unless your name is Martha Stewart or Rachel Ray .. we all eventually fall back on our 8-10 favorite "meals"
So i thought - if we shared some of our own go-to meals with each other ... we might be able to add a few "new" ones to our own arsenal of meals.
So again - I ask you ...
What's for dinner tonight ?
Please give me something new to add to my rotation ... its our weekly shop tomorrow - so i want to pull together a few idea's and try and eat a meal each day next week that I've never had before .. or at least something that is not on my current "go-to" meal plan.
What meal do you always seem to fall back on in your house ? Maybe its something that I've never tried or not had in a while. I need inspiration !! I've got a blank shopping list in front of me - and nothing sounds good .. HELP !
4332 Replies
·
331154 views
Smoked some salmon on the grill while enjoying some Blue Moon beer. Kinda cool tonight so I fired up the heaters. Here in FL, we fire up heaters once the temps get below 60 
As for the salmon, I seared them first, then flipped them off to the side not over the coals and brushed on some lemon pepper marinade followed by some salmon seasoning. Threw some hickory chips on the coals and then closed the vents to about 10% airflow. Yum.
As for the salmon, I seared them first, then flipped them off to the side not over the coals and brushed on some lemon pepper marinade followed by some salmon seasoning. Threw some hickory chips on the coals and then closed the vents to about 10% airflow. Yum.
Pub Member / Supporter
America’s Fastest-Growing EV State Isn’t California—Not by a Long Shot
New data shows electric vehicle adoption is increasingly driven by state policies, electricity prices and charging access—not federal incentives
www.autoweek.com
The number-one US state for EV growth, according to the June 22 Yardi report?
Oklahoma.
It has no ZEV mandates and "minimal" incentives, Yardi says, but also has cheap electricity, high multi-car household rates (so, for example, a non-Lightning Ford F-150 pulls their trailers), and a consumer base willing to switch.
112 Replies
·
901 views
tomwellborn3rd (@wellborn.net)
This author has chosen to make their posts visible only to people who are signed in.
bsky.app
Never realized that Tesla is losing to BYD at manufacturing too, which IMO is Tesla's biggest accomplishment and area of innovation. Nice writeup about the state of play and how we got here though. I have no faith that we're moving any productive direction though sadly, most changes and efforts feel reactionary rather than rooted in making use of the time being bought by tariffs, with few exceptions.
So: how are the cars so cheap, and what is being cut to get there? The best public accounting comes from the Rhodium Group, which compared BYD, Geely, and Leapmotor against Tesla's Chinese operation, a fair comparison because it removes labor costs and shipping from the equation entirely. Their estimate is that BYD builds a car for about $4,700 less than Tesla builds a Model 3 in Shanghai, roughly 15 percent of the Model 3's price. The breakdown is the interesting part. Direct government grants account for about $292 per vehicle, which is 5 percent of the gap. The biggest single factor is vertical integration: BYD makes about 80 percent of its top-tier components in-house, against 37 percent for Tesla, and that eliminates roughly $2,369 per vehicle in supplier markups. Lower overhead, meaning cheaper engineering talent and administrative cost spread across enormous volume, accounts for another $1,719. And BYD pays its suppliers on 155-day terms, against Tesla's 60, which is worth about $214 per car in float. When people say the Chinese advantage is subsidies, the per-vehicle number says otherwise. When people say it is slave wages, the Tesla Shanghai comparison says otherwise too. The advantage is mostly that BYD decided, twenty years ago, to make its own batteries, its own motors, its own power electronics, and its own semiconductors, and Western automakers decided the opposite.
US EV sales are rising again. Here’s why the recovery is set to last.
Even though sales tanked last year after the end of federal incentives, the American EV sector is on the mend as drivers face sky-high gasoline prices.
www.canarymedia.com
TWiT Tech Podcast Network
Time for another AWESOME video from the TWIT Network!
View: https://www.youtube.com/watch?v=mO_nW-BTlv4
Direct YouTube Link - Microsoft Defender Arriving on Linux
TWIT's Website
TWIT Live Feed
View: https://www.youtube.com/watch?v=mO_nW-BTlv4
Direct YouTube Link - Microsoft Defender Arriving on Linux
TWIT's Website
TWIT Live Feed
0 Replies
·
17 views
Ham Radio 2.0
Time for another AWESOME video from Ham Radio 2.0!
View: https://www.youtube.com/watch?v=wDeuQ1SLkQU
Direct YouTube Link - LIVE!
Ham Radio 2.0 Website
Ham Radio 2.0 on Facebook
View: https://www.youtube.com/watch?v=wDeuQ1SLkQU
Direct YouTube Link - LIVE!
Ham Radio 2.0 Website
Ham Radio 2.0 on Facebook
0 Replies
·
13 views
Supporting Founder
Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
148 Replies
·
1742 views
Was thinking same thing. It should be a good week for sec shorts and roll callThey ought to have fun with this…