My new DG380 motor arrived at noon today and I've been working on it mostly ever since lol. Couldn't rig anything for a 1m primestar to fit onto the motors shaft yet, so I settled for an 84E for now. Since I've never used one of these diseqc motors I was mostly fumbling. But for now, just a couple of questions...
1. The motor bracket has a little sticker, picture of a wrench with a red line thru it, meaning, I suppose , hand tighten only? Doesn't sound right to only hand tighten something holding the motor to the bracket....OR, does it just mean 'dont overtighten?'
2. I can track the arc from 74 to about 101 ok, seems to be getting both polarities on those sats, but doesn't seem to be able to see anything west of 101. Its not trees, so what should I adjust for that-the azimuth? It tracks so well on what it does see, I'm almost afraid to move anything,haha....
I just turned the mount on the 84e upside down and shimmed the tube, tightened the bolts on the 84's mount snug to the motor shaft and it seems tight. And I weighed the dish/mount first, to be sure, around 23 pounds. So I should be ok on the weight , far as the motor. I think its says 31lbs max.
3. Lastly, should I mess with trying to set up the motor on anything in a receiver tonite,or wait until I get it tracking completely right?
Your input appreciated !