Social Feed

M
Supporting Founder
Last reply · posted in FTA Receiver / Equipment Support
I searched a few threads but didnt find anything

I have a azbox elite and have never had good results using Diseqc 1.2 on it. I will set it for say 72W and lock the channels. When I change channels on the same TP the dish will move. So right now its still "slaved"...Feed from 99W C-band and a feed from the 2 motorized units I have.

So have they fixed Diseqc 1.2 on the elite yet? Or am I doing something wrong when setting it up?
8 Replies · 2555 views
M
ugh...guess it will stay slaved and I'll use the old Pansat to move the 2nd motorized (its only used when there are 2 good ballgames on) ;)
GreatFTA
Hang in there, Iceberg. Surely AzBox will address this. The Ultra I bought is fairly new with its issues but the company will address them.
J
Iceberg I have Premium Plus, not an Elite, and am using it exclusively with DisEqC 1.2 with my Mesh Dish, Actuator, and Vbox III. I have 15 Sats scanned in and have had a few problems, but for the most part its working with the Existing Satellite List. I have had to create new Sats - 125.0W on KU Band, 58.0W on C Band, 63.0W on KU Band, and 103.0W on KU with the Pentagon Channel - got Tp 12100 at Q = 65!! 121.0W comes in beautifully on HD for Sports Time Ohio, and those ION HD Channels on 103.0W on C Band are great. Problems from Settings > Antenna Setup:

1)One of the most annoying things is no matter what you do when creating / and or scanning in a new Satellite is the East Side Limit gets created whether you want it or not, and the only way to get rid of it is to: Reset Limits, then Save, and Reboot right there in Settings Set up.

2)When you are setting up the Actuator after pressing DisEqC 1.2 and trying to adjust for the Strongest Signal the Tp list keeps defaulting BACK to the first Tp. If you exit out, the counts on the Actuator sometimes start moving up and down at Random! So the only thing I know of to do is to cycle the Actuator back and forth with the V Box III Remote control for the best Tp Signal, then go back into the DisEqC 1.2 Setup set it for that count, save it, then Reboot again. If you don't Reboot, as soon as you back out of DisEqC 1.2 motor control, the Dish starts moving at Random up or Down again!!

3)You may already know that the S and Q Levels on the Tp's are very slow to show up. You switch to a Tp then you sit and wait for the Signal Level to Show Up. Then you have to wait again for the Polarity to show up when you get NO SIGNAL by switching V & Q and it is slow to appear.

4)Also the Blindscan is very slow,- I do a Horizontal then a Vertical Scan on Each Satellite which is a bit faster then an ALL Scan and it seems to eliminate duplicate channels.

Its funny but the Motor Control and the Signal Levels were much faster to show up my much cheaper Viewsat Rx but.... you would lose everything at times when it got a braincramp, and it sure didn't have HD, AC3, or the great picture quality that the AZbox has.

Hope this helps.
AcWxRadar
I searched a few threads but didnt find anything

I have a azbox elite and have never had good results using Diseqc 1.2 on it. I will set it for say 72W and lock the channels. When I change channels on the same TP the dish will move. So right now its still "slaved"...Feed from 99W C-band and a feed from the 2 motorized units I have.

So have they fixed Diseqc 1.2 on the elite yet? Or am I doing something wrong when setting it up?

Ice,

I personally wasn't aware of this problem when using DiSEqC 1.2 positioning, but I may be using a totally different setup than you are.

Have you only used your Elite with a G-Box or V-Box to control a BUD? Have you ever used it with a H-H motor like the SG2100 / DG-380 etc?

I don't have a C-Band "BUD" dish nor any positioning signal converter box of any type. I have only used my Premium and Premium Plus with the H-H motors and I have not experienced any problems like you are describing (when using DiSEqC 1.2 or USALS).

My only problem with motor positioning was not limited to DiSEqC 1.2, but was also a problem using USALS. This was a corruption in the original "satellite / channel" listings. My satellites kept changing orbital positions when I added or edited a satellite (no problems when deleting them - but my intent was to add more sats, not remove them).

For example, if I had AMC 9 @ 83.0W and SES 1 @ 101.0W in my list already and then I added Galaxy 19 @ 97.0W... AMC 9 @ 83.0W would change to AMC 9 at 101.0W and it would actually drive the motor to 101.0W. SES 1 @ 101.0W and Galaxy 19 @ 97.0W would remain correct. I would delete AMC 9 @ 101.0W and add it back in as AMC 9 @ 83.0W and then SES 1 @ 101.0W would change to SES 1 @ 97.0W! If I kept trying over and over again, I would finally get the list totally correct and it would remain so, until I added another satellite. Then I might get lucky and all would remain well, but usually, I would have to start the whole process over again. It was like the "vicious circle" term we all hear about.

Performing the North Americanization of my satellite list (obliterating the factory list) cured this.

My problem as iterated above has nothing to do with what you are experiencing (at least I don't think it is related). Have you ever reported this on OpenSat's AZBox Bug Report / Suggestion site?
I would certainly recommend that if you haven't done so already. That is a really strange symptom. It almost sounds like the AZBox is sending out motor commands when it shouldn't be or the channel changing/frequency changing signals are so lousy that the V-Box or G-Box is reading them as motor commands. Hmm?????

Can these G/V-Boxes take USALS data and use that to control the BUD actuator? Or do they require the DiSEqC 1.2 format as their input command? If they could use USALS, you might try changing your satellites over to USALS positioning and run a test. That might help rule out some areas of possible fault sources (maybe).

RADAR
M
Have you only used your Elite with a G-Box or V-Box to control a BUD? Have you ever used it with a H-H motor like the SG2100 / DG-380 etc?
no G-Box...using a SG2100 on a 36" dish..

My only problem with motor positioning was not limited to DiSEqC 1.2, but was also a problem using USALS. This was a corruption in the original "satellite / channel" listings. My satellites kept changing orbital positions when I added or edited a satellite (no problems when deleting them - but my intent was to add more sats, not remove them).

Performing the North Americanization of my satellite list (obliterating the factory list) cured this.

I wonder if that is what it was. Right now I only have 3 sats logged in
-99W C-Band
-0.0 Motor
-0.0 Motor2

so if I manually add the sats (thats no biggie to do since I'm KU only) maybe that will fix it?

I had this same issue back in March but there has been updates since then so I didnt know if it was fixed
http://www.satelliteguys.us/azbox-discussion/206940-azbox-sg2100-dont-mix.html
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68532 Replies · 2673012 views
  • Like
Reactions: c-spand
H
TAKE IT As It Comes-The Doors
ClarkGable
Take It To The Limit - The Eagles
  • Like
  • Love
Reactions: FTA4PA and gms49ers
harshness
Take It To The Limit - The Eagles
The two instances of "The" should have been highlighted.

Take
Me to the River - Talking Heads
dishstaller
Blinded By The Light - Manfred Mann's Earth Band
Bobby
I Saw The Light - Todd Rundgren
  • Like
Reactions: dishstaller
meStevo
Lifetime Supporter
Last reply · posted in The Sports Section
Schedule drops tomorrow. Mandatory mini camps in June. Hall of Fame game August 6th.
112 Replies · 1756 views
  • Like
Reactions: Jimbo and dfergie
osu1991
  • Like
Reactions: Mike0616
M
Hopefully nowhere near a microphone.
Y
Hopefully nowhere near a microphone.
After having experienced Gus Ferguson trying to call soccer games, I'm uncertain why NFL football analysts get hate. Even the "worst" of them are pretty good.
meStevo
Jalen Hurts out indefinitely as they treat and monitor a superficial blood clot in his leg.


View: https://x.com/RapSheet/status/2111074303185989663?s=20
  • Sad
  • Wow
Reactions: Mike0616 and Foxbat
meStevo
Browns lead the AFC North 🤣

Seth Meyers What GIF by Late Night with Seth Meyers
meStevo
  • Wow
Reactions: Mike0616
Former member 209992
Last reply · posted in SatelliteGuys Support Center
For some reason, the satelliteguys.us site is loading a lot slower than usual on both Chrome on my Asus laptop and Safari on my iPhone.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
541 Replies · 18545 views
  • Like
Reactions: charlesrshell
Scott Greczkowski
Was down due to an emergency update at the ISP. They did email me seconds before they took it down and apologized for the short notice.

However once the server was back online NGINX failed to start.

I was at the grocery store and just rebooted the entire server and everything came back up again.

Just got home from the grocery store I will bring in the groceries and then take a look at what NGINX failed the first time.
comfortably_numb
Was down due to an emergency update at the ISP. They did email me seconds before they took it down and apologized for the short notice.

However once the server was back online NGINX failed to start.

I was at the grocery store and just rebooted the entire server and everything came back up again.

Just got home from the grocery store I will bring in the groceries and then take a look at what NGINX failed the first time.

NGINX
The site uses Nugenix?!


View: https://youtu.be/_DhEEo5S9fg
Scott Greczkowski
Ok checked it out and for some reason the web server (NGINX) tried starting before the DNS resolver fully loaded. This is why it worked when I rebooted the machine.

Thanks to ChatGPT it had me change the NGINX config to prevent this from happening again.

With that said I can't prevent the ISP from doing emergency upgrades which was the cause of all of this.
navychop
Nature will develop better idiots.
  • Like
Reactions: charlesrshell
TRG
TRG
Nature will develop better idiots.
God help us.
Scott Greczkowski
I guess this is what the downtime was about.

IMG_0607.webp
Ramy
Supporting Founder
Last reply · posted in The Sports Section
Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
150 Replies · 1819 views
  • Haha
Reactions: Mike0616
Foxbat
They ought to have fun with this… :devilish
osu1991
They ought to have fun with this… :devilish
Was thinking same thing. It should be a good week for sec shorts and roll call
R
A lot of upsets yesterday, but my LSU Tigers won.
Foxbat
Best fan sign I saw during the ND-BYU game: "Bear ate your Lucky Charms!" (Bear being the Cougars' QB). I was going to suggest, "Have you or your team been involved in a Carr crash?"
  • Haha
Reactions: Jimbo and Mike0616
M


They get cruel sometimes, very very cruel.😈. Hated to see my dawgs go down but I still say being ranked #1 is a hex on you!
  • Like
Reactions: Howard Simmons
Peter Parker
Supporting Founder Lifetime Supporter
Last reply · posted in DISH Network Support Forum
No idea what improvements might be involved.
20 Replies · 887 views
  • Like
Reactions: LQQK and reubenray
bookworm370
Has anyone noticed an FF stutter with 713? I used to be able to hit FF a few times and skip smoothly. After 713 (maybe 712), when I skip forward, there is a definite stutter for as many times as I have pressed FF.

Can anyone check on this and report back? Recorded programs and then press skip forward a few times to see if it's smooth? Normally, it just jumps to the right place after the skips.
  • Like
Reactions: charlesrshell
N
I'm getting fabulous picture on Ch. 148 4k, but zero audio with H713. This is with a recorded show (Notre Dame game). Anyone else have this? Audio is fine on every other channel.
  • Like
Reactions: charlesrshell
R
Has anyone noticed an FF stutter with 713? I used to be able to hit FF a few times and skip smoothly. After 713 (maybe 712), when I skip forward, there is a definite stutter for as many times as I have pressed FF.

Can anyone check on this and report back? Recorded programs and then press skip forward a few times to see if it's smooth? Normally, it just jumps to the right place after the skips.
My wife mentioned that her remote is acting strange this morning. She hit FF and it went to 15x FF.
  • Like
Reactions: charlesrshell
Foxbat
Wife bought me a t-shirt that has "have you tried turning it off and on again?"
Here's the one I need:
1792365258110.webp
dishstaller
Here's the one I need:
Just ordered one....that's great.
jsmit86
I'm getting fabulous picture on Ch. 148 4k, but zero audio with H713. This is with a recorded show (Notre Dame game). Anyone else have this? Audio is fine on every other channel.
It's a known issue.
For a temporary fix, go into the menu, Audio, and turn Dolby Audio "OFF". You will have PCM stereo audio.

I was able to give the tech ops team some data logs so they could diagnose the problem, and they rolled me back to H708 temporarily. It fixed that issue.

They let me know that they understand what caused the issue, and it will be fixed within a few weeks in a new update.
Former member 208119
Last reply · posted in SiriusXM Satellite Radio
My year was almost up and we got the new bill for a year of service for $ 360.00 insane sat radio is becoming like cable!!! i logged into my acct and hopped onto chat and told the rep that i wanted to cancel. she understood my concern and went quiet for a few minutes. i figured that she was canceling my service. she comes back and said that she seen that i have been a sub since 07 and then offers me the same package for a year for 120.00 with taxes and fee's!!! i grabbed it. after almost having a stroke :biggrin
239 Replies · 11068 views
Foxbat
Well, that was a waste of effort. Our new Cadillac comes with a three-month free trial. Good that it's free, bad that I'll have to go through the Cancellation Dance all over again…
  • Haha
Reactions: Howard Simmons
N6BY
Well, that was a waste of effort. Our new Cadillac comes with a three-month free trial. Good that it's free, bad that I'll have to go through the Cancellation Dance all over again…
I just bought a Ram 1500 truck with a 3 month free trial. What to do when it ends?

All I want is music and news, but it is listed for $11.99 + $5.00 more for news. But $16.99 per month isn't worth it to me.
comfortably_numb
What to do when it ends?

Ask for the "All Access Plan" for $5/month.
harshness
Ask for the "All Access Plan" for $5/month.
Since the agents are now AI, you keep refusing the offer until you can justify the cost.
  • Like
Reactions: N6BY
B
What i noticed with my last renewal XM is now billing me $4.99 monthly instead of one time yearly payment.
Jimbo
What i noticed with my last renewal XM is now billing me $.99 monthly instead of one time yearly payment.
Did you accidentally get on the wrong plan ?
I still do the once a year plans.
Jimbo
Since the agents are now AI, you keep refusing the offer until you can justify the cost.
Not entirely true ...
If you ask for a Human, you'll get one ...
You will definitely know when you do.
S
Not entirely true ...
If you ask for a Human, you'll get one ...
You will definitely know when you do.
Don't you mean phone sex operators:biggrin
Jimbo
Don't you mean phone sex operators:biggrin
Is That why you keep SXM ??? :biggrin
B
Did you accidentally get on the wrong plan ?
I still do the once a year plans.
I have to think maybe more people dont keep track of the monthly XM bill. Every time i renew i put a reminder on my calendar week before its time to renew. My wife told me the other day not to renew her and then i told her you are not going to be able to listen to XM at home. Then she changed her mind...!!
TRG
TRG
I have to think maybe more people dont keep track of the monthly XM bill. Every time i renew i put a reminder on my calendar week before its time to renew. My wife told me the other day not to renew her and then i told her you are not going to be able to listen to XM at home. Then she changed her mind...!!
I get an e-mail every month reminding me that X amount will be charged to my credit card. If I see it go up I get on chat or pick up the phone. But I also remember that my year is up in December.
B
I get an e-mail every month reminding me that X amount will be charged to my credit card. If I see it go up I get on chat or pick up the phone. But I also remember that my year is up in December.
yea i don't understand WHY, like you I get a notice each month. Mine is also up in December.
  • Like
Reactions: Howard Simmons
Jimbo
yea i don't understand WHY, like you I get a notice each month. Mine is also up in December.
You get an email every month to let you know they are billing you for the next month.
  • Like
Reactions: Howard Simmons
Foxbat
Mrs. Foxbat reminded me it's that time of the year to do the Cancel Tango💃🏽

The A.I. agent appears to be better than in the past. It got to the acceptable price quicker than previous years, no human operator involved. $5/mo and I still have over $50 in SiriusXM credit from my FordPartner benefits.
Jimbo
Mrs. Foxbat reminded me it's that time of the year to do the Cancel Tango💃🏽

The A.I. agent appears to be better than in the past. It got to the acceptable price quicker than previous years, no human operator involved. $5/mo and I still have over $50 in SiriusXM credit from my FordPartner benefits.
I forgot you can pay that with Ford Pass points, I won't be due again till Feb, but I'll have to remember to try it ... Not sure what needs to be done, but I do have a substantial amount of points currently.
S
Is That why you keep SXM ??? :biggrin
when i say cancel. they give the moon and stars!!! iv'e gotten free radios and a free month once since it was my bday ;).
  • Like
Reactions: Howard Simmons
osu1991
Pub Member / Supporter
Last reply · posted in The Chit Chat Club

The number-one US state for EV growth, according to the June 22 Yardi report?
Oklahoma.


:eek


It has no ZEV mandates and "minimal" incentives, Yardi says, but also has cheap electricity, high multi-car household rates (so, for example, a non-Lightning Ford F-150 pulls their trailers), and a consumer base willing to switch.
113 Replies · 929 views
meStevo

Never realized that Tesla is losing to BYD at manufacturing too, which IMO is Tesla's biggest accomplishment and area of innovation. Nice writeup about the state of play and how we got here though. I have no faith that we're moving any productive direction though sadly, most changes and efforts feel reactionary rather than rooted in making use of the time being bought by tariffs, with few exceptions.

So: how are the cars so cheap, and what is being cut to get there? The best public accounting comes from the Rhodium Group, which compared BYD, Geely, and Leapmotor against Tesla's Chinese operation, a fair comparison because it removes labor costs and shipping from the equation entirely. Their estimate is that BYD builds a car for about $4,700 less than Tesla builds a Model 3 in Shanghai, roughly 15 percent of the Model 3's price. The breakdown is the interesting part. Direct government grants account for about $292 per vehicle, which is 5 percent of the gap. The biggest single factor is vertical integration: BYD makes about 80 percent of its top-tier components in-house, against 37 percent for Tesla, and that eliminates roughly $2,369 per vehicle in supplier markups. Lower overhead, meaning cheaper engineering talent and administrative cost spread across enormous volume, accounts for another $1,719. And BYD pays its suppliers on 155-day terms, against Tesla's 60, which is worth about $214 per car in float. When people say the Chinese advantage is subsidies, the per-vehicle number says otherwise. When people say it is slave wages, the Tesla Shanghai comparison says otherwise too. The advantage is mostly that BYD decided, twenty years ago, to make its own batteries, its own motors, its own power electronics, and its own semiconductors, and Western automakers decided the opposite.​
harshness
The EV company to watch out for is SAIC. They seem likely to take over Government Motors at some point.

GM originally struck a JV deal with SAIC to gain access to China. Now SAIC has taken China back with the substantial library of technology GM shared and they're looking to export to Mexico, South America, the Middle East, and Asia-Pacific.
osu1991
  • Like
Reactions: Foxbat and AZ.
harshness
If it weren't for the sky-high electricity prices...

Of course, the real scare with Winter coming is the insane cost of heating oil.
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in The Chit Chat Club
Stumbled across this ... http://www.gaspricewatch.com/USGas_ZipSearch.asp
I found no local prices, although it did show stations at my location...
Added these to this post...
USA National Gas Temperature Map
State By State Gasoline Taxes
Gas Buddy

Ethanol Free Stations

5553 Replies · 460691 views
Bobby
Regular$5.999​
Premium$6.399​
Diesel$7.999​
at Costco, Rohnert Park.​
  • Like
Reactions: harshness
dishstaller
Regular$5.999​
Premium$6.399​
Odd that out there, Prem is only 40 cents higher. Here it's a full dollar more.

Last night it was about $4.17 gas, $6,19 diesel.
harshness
Odd that out there, Prem is only 40 cents higher. Here it's a full dollar more.
On the West Coast, a 40-cent differential is common. It used to be 30 cents before the prices rose above $3.

A "full dollar more" sounds like it may be boat gas (non-alcoholic), which is a whole different discussion.
  • Like
Reactions: Foxbat
Foxbat
Here in Indiana, the difference between Regular and Premium is usually a dollar, but some charge even more:
1792374072446.webp
  • Like
Reactions: dishstaller
dishstaller
A "full dollar more" sounds like it may be boat gas (non-alcoholic),
Both non-ethanol and prem run about the same....buck more. When we were up in TN it was a buck more up there as well.
harshness
In Oregon, our premium boat gas is about a dollar more than our corn premium. Several stations only offer the non-corn premium grade.
SuperDish_Fan23
Last reply · posted in DISH Network Support Forum
Why are ViP922s So rare? like its crazy how ebay has none, i checked everywhere, also, i got a ViP222k now, which is actually activated!
4 Replies · 111 views
dishdude
They didn't sell many, they were pricey and not out long. Quickly got replaced by the Hopper.
T
They were high-end specialty, somewhat buggy and the 612/622/722 just overwhelmed it in popularity.
HipKat
I think they were more of a transitional receiver bridging the VIPs to the Hopper. They were a PITA to install and were buggy. Personally, I thought at the time that they were the best receiver out there. The versatility of the VIP's with the new Hopper GUI and, by far, the coolest-looking front plate and lighting.
  • Like
Reactions: charlesrshell
AZ.
AZ.
Well if it is because of reliability that wouldnt shock me.I went through 5 or 6 of them in little over 2 years. I loved the Sling when it worked! Saved lots of money having it in the day. That was probably 15 or 16 years ago?
  • Like
Reactions: charlesrshell