Social Feed

R
RPB
Last reply · posted in Free To Air (FTA) Discussion
Been reading for weeks, but joined to introduce myself and ask directionn

Newbie here with 100+ channels in a 200 mile radius on OTA setup I paid $1,200 for and love, but want more
I'm open to suggestions, may some day upgrade to 4 room system like at satelliteav, but want to at least get started on the living room for now, next computer will have a card for ota reception dvr in it too.' budget for FTA under $1,000 if possible)


Would this setup get me old type programming such as This/MeTv/RTV or do I need an Azbox for 4:2:2 ?
(I have no interest in Sports, just old programs mostly)

I'm near, 60 miles north of Austin, Texas in Burnet, Texas

sadoun com
Receive both C & KU Band Free To Air signals from several satellites with this affordable C/KU-Band bundle.
MC-1 Bundled System

upgraded to a MicroHD receiver for HD and features

SD180PM: Polar Mount Style

P76: 3"dia x 39" Mast with side supporting struts

HARL-3618 18" Actuator

DMS BSC621 C/KU Band LNBF

VBox Positioner

Thanks
(I help newbies on Texas kayak fishing forums and concealed carry forums and computer forums, but just discovered FTA, so I am a total newbie on the subject)
Really ... thanks

Also I saw
FreeSat 800 HD
LimeSat HD
as HD boxes, don't know if they have any benefit over the MicroHD or if they get C-band or much at all really; I just want my old shows and don't know if I even need C-band or if i should get 4:2:2 etc to get them:)
25 Replies · 5562 views
R
RPB
Seems like everyone in Texas, (except one guy in Pasadena), mounted on tall poles http://dallas.craigslist.org/ndf/ele/3319344586.html don't think I need to, but getting free/cheap dishes is work lol
SatelliteAV
Most used dishes will be much better quality and performance than the dish you purchased or are considering. Not sure why you are planning multiple upgrades instead of just starting with quality and installing only once.

If it were me, I would place two ads in your local Craigslist. One to sell the current dish before assembling and another to find a quality dish.

Once you choose your quality used dish, then install the right sized pole and have a crane company pluck and place. Cost should be $300 - $400 to have the dish removed and installed on your pole.

Just my 2 cents...
R
RPB
The only reason I consider multiple upgrades is that before I knew better, I bought Sadoun's C band motorized kit, and that's what it contains, a 6' prime focus.

I'd have been thrilled to buy a kit with a 8'/10'/12'/15' mesh dish and MicroHD, but I didn't find any so ... that's what I got, until I find better.

A crane company ...
It's about 65 miles to a city, there is one grocery store to choose from there ...
I also want to install at my brother's house, 11 miles away, there is no road to it, unless you have a 4-wheel drive with a really high clearance, you can't get there from here, it's uphill with transmission scraper rocks, FedEx/UPS won't deliver there ...it's up a hill, but you can't even get there if it rains.
If I could locate an installer who could have just installed a 15' mesh dish and all for under a few grand so I could watch RetroTV network and MeTv, I'd have done that first, it would be the easy way and I'd go kayak fishing or to the shooting range instead <smile> (or get started building a carport and patio cover around back where I have the metal laid out to get started ...)

I'll be on my roof the next few days replacing an antenna and a rotor.
I'd have put up a 60' antenna tower instead of a 15' mast on my 15' roof too but that was only about $1,200 for two antennas ... except out in the country here, tough to find people to install the towers, pretty much solid rock ground here, sparsely populated and I'm fairly new to the area, the Radio Shack on the outskirts of the city is now a pharmacy with some electronic parts for sale.

I really need to hook up with the Ham club in a nearby city ... and maybe then I'll learn where to get stuff around here
johann12
Seems like everyone in Texas, (except one guy in Pasadena), mounted on tall poles http://dallas.craigslist.org/ndf/ele/3319344586.html don't think I need to, but getting free/cheap dishes is work lol

I don't understand why anyone would use a tall pole like that, unless there is absolutely no other way.
It just makes it hard to set it up, make adjustments and replace parts.

My dish is pointing over my house also, but I set it back about 25 feet and the pole is 7 foot above ground. That makes the bottom rim on my 10 foot dish to be 6 foot of the ground at my location with most the satellites I watch.
So the bottom rim of the dish is still pointing about 15-20 feet above the roof ridge of the house. And I will still clear my 100 foot trees that I have all around my house.
johann12
For my setup I have $260 total.
1 free 7 1/2 foot, 1 $50 10 foot, 1 receiver,mover and LNBF, concrete and post and RG6 cable.
I get hundreds of channels.
All my dishes came apart in 1/4 panels and I hauled them home on top of my escort station-wagon.

Remember bigger is better.
If you know someone with an bucket truck (phone company, tree removers/trimmers etc) or someone with an tractor and a frontloader/bucket on it, that would be easier to remove a used dish on a tall pole.
brittanygarden
Staff member Pub Member / Supporter
Last reply · posted in DISH Network Support Forum
Please post your remote make/model here and any details of your issue. We are looking to collect as many examples as possible. I may reach out to you for your receiver number, but please do not post it here.

If you've already reported this to me, please repost it here so I can track all instances in one thread.

Thanks!
Brittany
23 Replies · 695 views
david_jr
I lost IR control of my H3 after the H398 update in September of 25. We were using the Harmony Hub remote system from Logitech. We have been using the H3 OEM remote to turn the receiver on and off ever since then.

H398 Software Version
bookworm370
I have a solution that is guaranteed to work.
All Hopper developers are required to turn in their RF Hopper remotes and use only IR remotes.

I guarantee you that the bug will be fixed in two days!
Try it; it will work! They will work 24 hours a day to fix it when the WAF goes into the toilet!
GRB1959
I have a solution that is guaranteed to work.
All Hopper developers are required to turn in their RF Hopper remotes and use only IR remotes.

I guarantee you that the bug will be fixed in two days!
Try it; it will work! They will work 24 hours a day to fix it when the WAF goes into the toilet!
Excellent suggestion.
david_jr
I lost IR control of my H3 after the H398 update in September of 25. We were using the Harmony Hub remote system from Logitech. We have been using the H3 OEM remote to turn the receiver on and off ever since then.

H398 Software Version
BTW my bedroom H3 does not have this problem where I am using a Harmony 650. Also has there been any more feedback? Are they still working on this or what?
Foxbat
I think I have a separate issue with our Hopper 3 when watching/recording a 4K event. I have had many instances of it spontaneously restarting when I "disturbed" it during a 4K event. I learned to not touch the remote after a given point.

But it might be the IR code subroutine and 4K that make it touchy. I'll try it Wednesday night during the NLCS Game 3.
  • Like
Reactions: charlesrshell
JeffN9
I think I have a separate issue with our Hopper 3 when watching/recording a 4K event. I have had many instances of it spontaneously restarting when I "disturbed" it during a 4K event. I learned to not touch the remote after a given point.

But it might be the IR code subroutine and 4K that make it touchy. I'll try it Wednesday night during the NLCS Game 3.
I was having similar issues last night while watching and recording the NLCS game on 148. When I tried resuming the game at one point the screen went blank and I couldn't get my H3 to respond to any remote commands. Eventually the Hopper went to a HD channel but still no remote response. After a while the Hopper went into a re-boot cycle. This happened at least 3 times. I was using an IR universal remote only.

A little frustrating to have the game broken up like that but at least the Brewers won:)
bookworm370
Excellent suggestion.
Yea, I've only been a CIO for the last 30 years! :)
Trust me, when something important breaks, they get to own it!
A
Loaded H713 software on my Hopper 3 last week. Have not seen any change in the IR/RF remote issues with my Harmony 700.
Has Dish acknowledged this is a problem and are they committed to fixing it?
I'd be happy to roll back to last July.
  • Like
Reactions: charlesrshell
J
Last reply · posted in DISH Network Support Forum
This started a couple months ago. I have 2 H3s on one network, both with 2 EHD identical 3 TB seperately powered so all recordings are accessible by all 4k & J4s (8 of them).

On one H3 (not the main one that controls the MOCA network), after it reboots, it doesn't recognize it has two EHDs plugged into it. Rebooting the EHD by their power source doesn't fix it. Resetting the network doesn't. Software h3 reset doesn't fix it. Rebooting MOCA h3 doesn't fix it but so far, after 3+ cold boots (unplug pwr to H3 with unrecognized EHDs), it finally it figures out they are plugged into it. BUT.... Then when you open a program it only partially shows series and episodes, but instead of showing recordings, it only shows upcoming airings. HELP!!!!
21 Replies · 260 views
Almighty1
Thanks JohnGalt1234 - That's interesting. I wonder are the Boot Strap versions different between a Hopper 3 only and a Hopper 3 with Hopper Plus setup as I have the later. I guess when charlesrshell is able to since he has both setups, he can do the test. Unless the bootstrap version is tied to when the specific Hopper 3 is manufactured, in my case, mines is from February 2016 when it was installed.

At least Google Search AI is saying the bootstrap version will never change and unique to each Hopper 3.

1792277626286.webp


This is probably why different people seem to either have the issue or they don't because the bootstrap code could also be tied to the hardware revision and
components other than the internal HD.
  • Like
Reactions: charlesrshell
J
Sorry about dupe images... having a heck of a time trying to post an image of other H3 that my gf text to me.
  • Like
Reactions: charlesrshell
J
Sorry about dupe images... having a heck of a time trying to post an image of other H3 that my gf text to me.
1000013035.webp
  • Like
Reactions: charlesrshell
J
Thanks JohnGalt1234 - That's interesting. I wonder are the Boot Strap versions different between a Hopper 3 only and a Hopper 3 with Hopper Plus setup as I have the later. I guess when charlesrshell is able to since he has both setups, he can do the test. Unless the bootstrap version is tied to when the specific Hopper 3 is manufactured, in my case, mines is from February 2016 when it was installed.

At least Google Search AI is saying the bootstrap version will never change and unique to each Hopper 3.

View attachment 194853

This is probably why different people seem to either have the issue or they don't because the bootstrap code could also be tied to the hardware revision and
components other than the internal HD.
The image I just sent for master H3 is on hopper+., casino is not but both Vs and bootstraps are the same.
  • Like
Reactions: charlesrshell
Almighty1
JohnGalt1234 - So you basically have 2 Hopper 3's. The CasinoH3 is the one that is Hopper 3 only while Master Bedroom is a Hopper 3 with Hopper Plus setup.
Master Bedroom uses Android TV (ATV) software so the DISH part is actually a app and will behave differently as you can probably tell the Guide's are different on the Master Bedroom which will resemble the same guide used on other ATV devices such as the Joey 4 and Wireless Joey 4. If I am correct, the CasinoH3 is the one with the problem since you did say the one dated 09/05/2026 is the naughty one while 08/15/2026 named Master Bedroom is the nice one. Usually I would expect the CasinoH3 to be the one without the problem because it's Hopper 3 only and Master Bedroom would be the one with problems because it has the Hopper Plus involved. That is why they behave differently because CasinoH3 is running the native Hopper 3 software while Master Bedroom is running the Android TV software and also it runs a app called DISH known as package com.dish.atv.launcher, the version for mines is P15403 2026100917 so it's probably the same version as the Hopper Plus software version with the date of October 9, 2026, not sure what the 17 means except maybe revision 17?

This explains it better than I can. Sorry, had to take all the ads out.

1792279578261.webp
  • Like
Reactions: charlesrshell
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?
Anyone making their own breakfast sausage? I've recently been trying different recipes, found some I like, some I've modified...
42 Replies · 3605 views
  • Like
Reactions: spongella
navychop
Bob Evans Sage.
R
Bob Evans Sage.
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.
  • Like
Reactions: navychop
dfergie
They run Owens at $3.99 for lb and $7.99 a couple times a month at some grocery stores here, I actually was wrong, just checked a pork sirloin roast it was $1.99 a lb. (cooked it yesterday so pack was in trash)
  • Like
Reactions: reubenray
TRG
TRG
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.
Kroger stores carry Bob Evans Sage Sausage. For me that means Smiths.

1631.webp
R
Kroger stores carry Bob Evans Sage Sausage. For me that means Smiths.

View attachment 194848
No Kroger's near me. I live in the heart of Walmart land. The only option besides Walmart is Harp's.
TRG
TRG
I live in the heart of Walmart land.
My deepest condolences.
R
My deepest condolences.
Surprisingly I moved here from the Gulf Coast due to the heat. But it has been hotter here due to the heat domes than it did down there.
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 6 views
Peter Parker
Supporting Founder Lifetime Supporter
Last reply · posted in DISH Network Support Forum
No idea what improvements might be involved.
12 Replies · 568 views
  • Like
Reactions: LQQK and reubenray
cpdretired
Two bugs out and three new bugs in.🐞
Almighty1
Updated to H713 on a Hopper 3 from H712 with Hopper Plus a few hours earlier.

It brought a old problem back:

One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software.

This was a major problem with H703.

H710 removed that dependency but it's broken again.

Rick Durham and brittanygarden
  • Like
Reactions: charlesrshell
dishstaller
Two bugs out and three new bugs in.🐞
Yep. Just got a call from a customer who said her DVR buttons stopped working. Told her about the new software and had her reboot her H3, problem solved.
  • Like
Reactions: charlesrshell
bookworm370
Yep. Just got a call from a customer who said her DVR buttons stopped working. Told her about the new software and had her reboot her H3, problem solved.
Reboot just fixes it for a short time and then it's back to messed up

Try going exclusively to an IR remote and you will see the pain
Almighty1
Updated to H713 on a Hopper 3 from H712 with Hopper Plus a few hours earlier.

It brought a old problem back:

One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software.

This was a major problem with H703.

H710 removed that dependency but it's broken again.

Rick Durham and brittanygarden

Within the last few hours as I did check earlier today when it was still missing, the Available Joey Software line now has added "P154 P15403" which is for the Hopper Plus that I have but my Hopper Plus software is still on P15317, I will do a Download Android TV (ATV) Software for the Hopper Plus, Joey 4 and Wireless Joey which are all Android TV devices and then manually do a check update on the Hopper Plus to update the software shortly.
  • Like
Reactions: charlesrshell
BatStang2000
This happened to me. I was outside mowing and my wife came out and said that our nieces and nephews were going to be on the Noon News. She had it on in the bedroom on our Joey3. Since they weren't on yet, I decided to turn it on in the Living Room on our Hopper3. When I selected the channel (through Dish, not OTA) the Joey3 turned itself off. When I went back to the bedroom to turn it back on, the Hopper3 did a reboot. Luckily it all finished before their story came on, but I just found it strange.
bookworm370
Has anyone noticed an FF stutter with 713? I used to be able to hit FF a few times and skip smoothly. After 713 (maybe 712), when I skip forward, there is a definite stutter for as many times as I have pressed FF.

Can anyone check on this and report back? Recorded programs and then press skip forward a few times to see if it's smooth? Normally, it just jumps to the right place after the skips.
  • Like
Reactions: charlesrshell
R
I got the 713 update yesterday.
  • Like
Reactions: charlesrshell
cpdretired
Supporting Founder
Last reply · posted in DISH Network Support Forum
Several Dish offers showed up today in my account. Once you choose one the rest are removed. Offers were Showtime, Starz, AMC and others.
38 Replies · 1800 views
  • Like
Reactions: ewindowman and LQQK
B
Just checked my account and it shows mgm+ at 8.00 per month, but that has red line drawn thru it and shows 0.00 per month. But it doesn't say how long this lasts,...... 1 month, 3 months, forever. I called customer service to get an answer, and they said nothing like that exists. Should I add the offer or not? Already paying them too much, but want to take advantage of something free.
S
Just checked my account and it shows mgm+ at 8.00 per month, but that has red line drawn thru it and shows 0.00 per month. But it doesn't say how long this lasts,...... 1 month, 3 months, forever. I called customer service to get an answer, and they said nothing like that exists. Should I add the offer or not? Already paying them too much, but want to take advantage of something free.
look again mine says free for 1 month
  • Like
Reactions: charlesrshell
Almighty1
look again mine says free for 1 month
Not for me, mines has no mention of how long aka the offer period and the Terms and conditions the $0.00 is good for. All I see is one can lose $5.00 if you decide to remove it before day 31 after you add it to the account.

1792131071109.webp
S
Not for me, mines has no mention of how long aka the offer period and the Terms and conditions the $0.00 is good for. All I see is one can lose $5.00 if you decide to remove it before day 31 after you add it to the account.

View attachment 194817
wonder why it says that
  • Like
Reactions: charlesrshell
Almighty1
look again mine says free for 1 month
You have a different offer that is free for a shorter timeframe which is different than the one that I and bnewt saw without defining the promotion period as I sent the question to DISH Care via Facebook Messenger and this is the response I got back 20 minutes ago.

1792177553912.webp
Almighty1
wonder why it says that
Answer 2 minutes ago from DISH Care via Facebook Messenger:
1792178974514.webp
bookworm370
Thanks, I tried it on the website first. I'll try it on the hopper
Darrell S
I tried on Hopper last night. Many more offers than the website has. I even got 3 free months of Gallery. Only offered 1 month on website
  • Like
Reactions: charlesrshell
long_time_Dish
I got Starz/Encore again for 50% off for 3 months yesterday.
  • Like
Reactions: charlesrshell
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68512 Replies · 2671723 views
  • Like
Reactions: c-spand
FTA4PA
Six O'Clock News - John Prine
  • Like
Reactions: sdfntx
Bobby
It's Five O'Clock Somewhere - Alan Jackson
harshness
Somewhere - Barbra Streisand
sdfntx
Somewhere in Time - John Barry
long_time_Dish
In Time - Kit Watkins
Former member 209992
Last reply · posted in SatelliteGuys Support Center
For some reason, the satelliteguys.us site is loading a lot slower than usual on both Chrome on my Asus laptop and Safari on my iPhone.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
540 Replies · 18287 views
  • Like
Reactions: charlesrshell
Scott Greczkowski
Was down due to an emergency update at the ISP. They did email me seconds before they took it down and apologized for the short notice.

However once the server was back online NGINX failed to start.

I was at the grocery store and just rebooted the entire server and everything came back up again.

Just got home from the grocery store I will bring in the groceries and then take a look at what NGINX failed the first time.
comfortably_numb
Was down due to an emergency update at the ISP. They did email me seconds before they took it down and apologized for the short notice.

However once the server was back online NGINX failed to start.

I was at the grocery store and just rebooted the entire server and everything came back up again.

Just got home from the grocery store I will bring in the groceries and then take a look at what NGINX failed the first time.

NGINX
The site uses Nugenix?!


View: https://youtu.be/_DhEEo5S9fg
Scott Greczkowski
Ok checked it out and for some reason the web server (NGINX) tried starting before the DNS resolver fully loaded. This is why it worked when I rebooted the machine.

Thanks to ChatGPT it had me change the NGINX config to prevent this from happening again.

With that said I can't prevent the ISP from doing emergency upgrades which was the cause of all of this.
navychop
Nature will develop better idiots.
  • Like
Reactions: charlesrshell
TRG
TRG
Nature will develop better idiots.
God help us.