Social Feed

mr3p

Pub Member / Supporter

Last reply Jul 4, 2024 · posted in C-BAND Satellite Discussion

Circular C-Band reception

Its been a few years since I checked out the limits of my LOS so this time I thought I'd see if I can receive any circular C-band signals which is something I've never tried. Not sure if there is anything ITC but targets this weekend will be 47.5W and 53W so the big unknown is if I'll get signal lock using dialectric plate. I was also reading about a Waveguide Polariser as alternative which didn't result in same signal loss? Anyone try one of these?

8 Replies · 1813 views

Load Replies (8) Reply Legacy View

Brct203

Jul 3, 2024

47.5W is quite easy, 40.5W is a bit uneven, some easy TPs and some really hard to get. 34.5W is not easy but low FEC makes it doable, but nothing ITC there other than a test card. 27.5W no longer has video, 22W has a bunch of Brazilian channels, quite easy if not too low. 14W a bit similar to 22W, was able to get most channels on a 6 footer

I would love to be able to find a circular feed that does not rely on a dielectric slab.

Reactions: FTA4PA and cyberham

cyberham

Jul 3, 2024

Brct203 said:
...22W has a bunch of Brazilian channels, quite easy if not too low...

I can vouch for this. I received it in past too on a 4-footer.

Reactions: Brct203 and FTA4PA

mr3p

Jul 3, 2024

Thanks for the good info. Anyone try using one of these: C Band Dual Polarity Circular Polarisation Kit or Extension Tube For Circular C Band Lnbf

Regarding dielectric plate insertion, it looks like there are grooves inside waveguide to hold it in place so is there a correct orientation? Any settings required in receiver?

Brct203

Jul 4, 2024

mr3p said:
Thanks for the good info. Anyone try using one of these: C Band Dual Polarity Circular Polarisation Kit or Extension Tube For Circular C Band Lnbf

Regarding dielectric plate insertion, it looks like there are grooves inside waveguide to hold it in place so is there a correct orientation? Any settings required in receiver?

Well, depends on the receiver. The dielectric plate basicaly converts circular to linear, and which one becomes H and which one become V will depend on which way you put the dielectric plate. I try one way, see what happens and correct if necessary. Now, most receivers don't have anything other that V and H labels anyway, so it does not really matter. However with more sophistiicated boxes like the enigma2 receivers, you usually have the choice of using circular labels for the polarization. It's just a label of course, technicaly it just changes the LNBF voltage. But in that case, might as well make it match the reality and the dielectric slab orientation matters. I hope that was clear (sorry it's a bit convoluted)

about the links you posted... very interesting stuff. I wonder if anyone would have specs and if we could just fabricate one. The one sold in Brazil is very inexpensive ($14.50!), but not sure if they ship to the US. Would be worth trying, for sure

cyberham

Jul 4, 2024

Some good dielectric plate discussion for the Titanium C1PLL LNBF is at this post and following. This was from my first time using a plate to receive circular transponders: Dielectric plate

Reactions: FTA4PA and mr3p

mr3p

Jul 4, 2024

cyberham said:
Some good dielectric plate discussion for the Titanium C1PLL LNBF is at this post and following. This was from my first time using a plate to receive circular transponders: Dielectric plate

Good thread, thanks.

View all replies (8)

Houston Rockets

Last reply 3 minutes ago · posted in FTA Receiver / Equipment Support

OTHER Mini Multiswitch

I just received 6 receiver 2 port mini Multiswitch and it work great, no external power need it, and you can connect 6 receiver instead of 4 on most Mini Multiswitches... If anyone is interested in where they can get one PM me....

3 Replies · 50 views

Load Replies (3) Reply Legacy View

Titanium

Today at 2:00 PM

Have you tested using external power? Over the years, have found unpowered polarity switching to be unreliable. Especially problematic when used with DiSEqC motors or switch stacking.

Houston Rockets

Today at 2:39 PM

No I have not. I just got it the other day and it is connected to six receivers working just fine. What I do is non power mini multi-switches work best with LNBF's and with LNB's

Houston Rockets

3 minutes ago

It also has a IPS and a OPS switch on the side of it with a power led light showing when is on. It seems to be very nice build switch

dishstaller

Pub Member / Supporter Lifetime Supporter

Last reply 12 minutes ago · posted in Internet Television (IPTV) Discussion Forum

Hughesnet cancelling email addresses

Wasn't exactly sure where to post this. Just had a customer come in inquiring about internet. He has HughesNet and had heard good things about mine. He asked if we provided email addresses and it kinda caught me off guard. I said he should be able to keep whatever email he had been using....my sister in law is still using a BellSouth email addy and they haven't been around here for many years. He said he had gotten a letter from HughesNet stating that they had until Nov 16th to save, move, forward, whatever, their Hughesnet emails because they would lose them after that date.

I have never heard of a company simply mass-deleting email accounts (the customer still has his HughesNet service). From what I understand, in the past, the company who was ditching their email service simply sold the customer base to a company like Google.

Anyone else getting this letter. He said he would show it to me tomorrow when I go out there and set up his internet.

5 Replies · 68 views

Load Replies (5) Reply Legacy View

Foxbat

Today at 2:37 PM

Doing a Google of the HughesNet Email notice, it seems that HughesNet has been trying to eliminate hosting emails since 2019. And with HughesNet filing Chapter 11 back in August, it would be a smart move to switch to a more stable Email provider. Even AT&T farmed out their Email to Yahoo! years ago.

SpaceX's Starlink and the Cellular 5G Home Internet solutions have pretty much relegated HughesNet and its high latency, low bandwidth Internet service to History. If Earth had shorter days, maybe a Geostationary Internet Solution might have stood a fighting chance…

dishstaller

Today at 2:57 PM

Well, I helped him set up a gmail acct....I actually wanted to see what the new process is for setting up a gmail acct since it had been years since I set mine up. Anyway, I showed him how to forward the emails he wanted to keep over.

navychop

Today at 3:16 PM

Foxbat said:
If Earth had shorter days,

Wouldn't we then die of old age sooner?

Reactions: Bobby

Foxbat

Today at 3:30 PM

navychop said:
Wouldn't we then die of old age sooner?

Still the same number of years, just more Sunsets…

klang

12 minutes ago

Foxbat said:
Even AT&T farmed out their Email to Yahoo! years ago.

I still have one of those although I've been trying to wean myself off it.

Bobby

Supporting Founder Lifetime Supporter

Last reply 36 minutes ago · posted in DISH Network Support Forum

Dish 4K Event Listings (No Discussion)

This is a thread that will keep you apprised of 4K events that will be showing on Dish channel 540. Keep looking here for information.

As of today, 9-27-17, there are no scheduled events posted for the next 2 weeks. That is subject to change on a daily basis.

761 Replies · 166953 views

Load Replies (761) Reply Legacy View

Reactions: HipKat, bryanw20 and charlesrshell

Bobby

Sunday at 11:00 AM

MLB, Brewers at Dodgers, Wednesday 10-14, 5PM PDT, Channel 148-02.

Reactions: charlesrshell

Bobby

Tuesday at 8:48 PM

MLB, Brewers at Dodgers, Thursday 10-15, 6PM PDT, Channel 148-02.

Reactions: charlesrshell

Bobby

Tuesday at 8:50 PM

CFB, Notre Dame at BYU, Saturday 10-27, 4:30PM PDT, Channel 148-03.

Reactions: Foxbat and charlesrshell

Bobby

Tuesday at 8:52 PM

NASCAR, Freeway Insurance 500, Sunday 10-18, 12PM PDT, Channel 148-04.

Reactions: long_time_Dish and charlesrshell

Bobby

36 minutes ago

CFB, Ohio State at Indiana, Saturday 10-17, 9AM PDT, Channel 148-01.
CFB, Arizona State at Texas Tech, Saturday 10-17, 12:30PM PDT, Channel 148-01.

Reactions: charlesrshell

View all replies (761)

Former member 209992

Last reply 51 minutes ago · posted in SatelliteGuys Support Center

Site is slooooow

For some reason, the satelliteguys.us site is loading a lot slower than usual on both Chrome on my Asus laptop and Safari on my iPhone.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.

524 Replies · 17842 views

Load Replies (524) Reply Legacy View

Reactions: charlesrshell

Foxbat

Today at 1:22 PM

Yeah. It's probably something going on with the MacBook as my iPhone has been pretty snappy.

Reactions: charlesrshell

Scott Greczkowski

Today at 2:49 PM

I have been optimizing the site the past few days... and got us here now.

We are rocking now!

Reactions: Foxbat, FTA4PA, worstman1 and 3 others

Foxbat

55 minutes ago

Foxbat said:
Yeah. It's probably something going on with the MacBook as my iPhone has been pretty snappy.

I rebooted my MacBook Air and it's zipping right along. Sorry, but it was taking over 20 seconds to load pages, with the pulsing blue bars so it was munching on something.

Reactions: charlesrshell

Scott Greczkowski

55 minutes ago

Remember folks... just like DNS... its always Foxbat.

Reactions: comfortably_numb, Bobby, charlesrshell and 2 others

Foxbat

51 minutes ago

Scott Greczkowski said:
Remember folks... just like DNS... its always Foxbat.

WTF… …What the Foxbat!

Reactions: TRG, Bobby, charlesrshell and 1 other person

View all replies (524)

dishstaller

Pub Member / Supporter Lifetime Supporter

Last reply Today at 3:00 PM · posted in The Chit Chat Club

Man falls to his death on roller coaster at 6 Flags in GA

Can't help but wonder if a worker overlooked checking the harness. I rarely ride a roller coaster anymore but when I do I check the harness myself pretty aggressively.
Can't imagine what the son is going through.

Dad levitated and bled then fell to his death from coaster

Eyewitnesses have shared fresh details of the horrific accident that happened at Six Flags Over Georgia on Monday afternoon.

www.dailymail.com

22 Replies · 181 views

Load Replies (22) Reply Legacy View

Jimbo

Yesterday at 11:02 PM

Back on the Goliath Roller Coaster ... I'm interested to find more details as well ...
Like where on the track did this happen (somewhere I read that it was on the climb up the top), which is impossible ...

They really need to take that ride and add at the very least, seatbelts ...

The Park is opening back up on Friday, the ride will Not be opening ... personally, I would keep it closed until different type of restraints can be designed and installed (over the winter).

I find it hard to believe that this ride is even allowed to be running with the restraints that exist at the moment, there are other rides that use the same type and they have been shut down across the country.

You got to believe that every ride has at least 2 types of restraint systems in place.

I wonder what and when we will hear from the Manufacturer ... and whatever governing bodies control these ...

Just think, this is a Major Amusement Park .... I would not have any problem getting on the Roller Coasters I have rode ...

Imagine what these County Fairs and others like them, I would not be caught Dead on one of them ... they get put up and tore down every other week, where is the safety for those rides ... No Thank You.

Reactions: dishstaller

Jimbo

Yesterday at 11:10 PM

Could B&M’s Patent on the “Clamshell” Ride Restraint Design Offer Clues as to What Happened on Goliath at Six Flags Over Georgia?

Incredibly sad news out of Six Flags Over Georgia as it’s being reported one man was killed after being ejected from Goliath, the B&M hyper coaster. Many news outlets have posted pictures of pe…

bgtsafari.com

navychop

Yesterday at 11:17 PM

Jimbo said:
I would not be caught Dead on one of them

Yet IF you were on one, you might be caught dead.

dishstaller

Today at 10:07 AM

Jimbo said:
Could B&M’s Patent on the “Clamshell” Ride Restraint Design Offer Clues as to What Happened on Goliath at Six Flags Over Georgia?

Incredibly sad news out of Six Flags Over Georgia as it’s being reported one man was killed after being ejected from Goliath, the B&M hyper coaster. Many news outlets have posted pictures of pe…

bgtsafari.com

Had no idea there were that many redundancies built into those restraints.

Jimbo

Today at 2:18 PM

dishstaller said:
Had no idea there were that many redundancies built into those restraints.

It makes sense, however, I would want more types of restraints, so if one doesn't work, the other does ... the restraints coming over the shoulder I would have expected ... with a Seat belt as last resort.

Fwiw, I inquired with what they use on Coasters at Cedar Point, various Coasters, different restraints according to what the car and track requires ...

NONE of the Coasters at CP use THAT particular system

I'm glad to see ...

dishstaller

Today at 3:00 PM

Jimbo said:
with a Seat belt as last resort.

According to the article, when you see a seat belt on a ride like this, it is basically used as a way of making sure the rider isn't too large/fat to safely ride the ride.

View all replies (22)

Ham Radio 2.0

Today at 2:52 PM · posted in Ham Radio 2.0

Kenwood TM-D750 vs ICOM ID-5200: Don't Buy One Before Watching This!

Time for another AWESOME video from Ham Radio 2.0!

View: https://www.youtube.com/watch?v=VGlC_BDgwZo

Direct YouTube Link - Kenwood TM-D750 vs ICOM ID-5200: Don't Buy One Before Watching This!
Ham Radio 2.0 Website
Ham Radio 2.0 on Facebook

0 Replies · 8 views

Replies Reply Legacy View

TWiT Tech Podcast Network

Today at 2:32 PM · posted in TWiT Tech Podcast Network

Tech News Weekly 459

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/watch?v=CELCVXF_wXA

Direct YouTube Link - Tech News Weekly 459
TWIT's Website
TWIT Live Feed

0 Replies · 9 views

Replies Reply Legacy View

TheRatPatrol

Last reply Today at 2:13 PM · posted in TV Shows

NCIS

Anyone else watch this show? Any guesses as to what was in the box Gibbs gave to Abby that was on her desk? It look liked it was glowing.

I also heard that someone was leaving the show at the end of this season. Any guesses as to who thats going to be?

2129 Replies · 214624 views

Load Replies (2129) Reply Legacy View

TheRatPatrol

Monday at 11:11 AM

Wait, Tony is the director now? Apologies, I stopped watching a while ago.

Reactions: Howard Simmons

Jimbo

Monday at 11:47 AM

TheRatPatrol said:
Wait, Tony is the director now? Apologies, I stopped watching a while ago.

Was Gibbs still there when you quit watching ?
If so, A Lot has happened ....

It's been pretty good all along , once you get use to Gibbs being gone.

Reactions: MikeD-C05

Jimbo

Monday at 11:41 PM