Social Feed

Main Feed My Feed
Si.
Si.
Last reply · posted in C-BAND Satellite Discussion

bad receiver ?

I am using a Amiko mini hd 265. in the afternoons the Weigel channels on SES 1 break up and sometimes disappear altogether . Yet all channels on ses 3 come in fine. Usully after 7 PM the waigel stations come in fine. I connected the v8 finder to the dish and could find no problem. Everything comes in great on all available stations any time of day. Is the amiko on tis way out? Is there a programming fix for this. ? If not I guess i'm in the market for a replacement.
Read more
8 Replies · 287 views
Load Replies (8) Reply Legacy View
Titanium
Titanium
Does the V8 blind scan the Weigel transponder at 4180 H or is the frequency different from the Amiko STB? What is the Signal Quality reading on the V8 of the Weigel transponder when it disappears using the Amiko?

What is the Amiko's Signal Quality reading on the Weigel transponder after 7pm?

Does the Weigel transponder completely lose SQ, reduced SQ or have fluctuating SQ readings when the channels break-up or disappear?

Do the Jewelry channels on 4140 H also disappear along with the Weigel 4180 H transponder?
Read more
Reply
  • Like
Reactions: Brct203
Si.
Si.
Titanium said:
Does the V8 blind scan the Weigel transponder at 4180 H or is the frequency different from the Amiko STB? What is the Signal Quality reading on the V8 of the Weigel transponder when it disappears using the Amiko?

What is the Amiko's Signal Quality reading on the Weigel transponder after 7pm?

Does the Weigel transponder completely lose SQ, reduced SQ or have fluctuating SQ readings when the channels break-up or disappear?

Do the Jewelry channels on 4140 H also disappear along with the Weigel 4180 H transponder?
Click to expand...
to reply . I am using a 10 foot mesh with a titanium LNB with the 5G filter. My amiko has set Weigel channels as 13 to 27 In order to check signal of JVC I had to scan JVC in. Went to a blind scan and Amiko set the results in channel 59-74 with JVC on 76. Weird , at 2:30 PM all the 59-76 channels came in great with S-98 Q89. frequency 4180V . The v8 reported same channels on 4181V. However Weigel on number 13-27 showed no signal and after about 7 PM they come alive with S92 Q75 ? Maybe the LNB is mounted wrong.or the receiver is on is way out?
Read more
Reply
Titanium
Titanium
Yes, the LNBF has been incorrectly mounted 90 degrees out of rotation. Reference the skew "0" mark to the horizontal polarity, delete the current transponders then rescan. BUT.... being 90 degrees out of skew is not the cause of signal loss, The incorrect skew only creates transponder and channel lists with incorrect polarities displayed.

The Amiko STB Signal Quality readings were always a bit wonky. Does the V8 display SNR (or CNR) value for the Weigel transponder? If so, the V8 SNR readings to compare between the times of receiving and not receiving would be helpful. A SNR (or CNR) gives specific signal report vs an SQ reading that is just a manufacture's uncalibrated setting.

Also, the Weigel transponder 4180 H (DVBS2 FEC 5/6) requires a significantly better signal to decode than the Jewelry transponder 4140 H (DVBS FEC 3/4). FEC 5/6 means that 5 out of every 6 bits of data must be received to properly decode and display (83.33 %), The FEC 3/4 is more forgiving as 3 of 4 bits of data must be received to properly decode and display (75 %).

BTW... It is possible that the V8 satellite meter is simply capable of decoding the transport stream and display programming with a lower signal than the Amiko is capable of decoding. If this is the case, a different STB might provide a more sensitive tuner or better coding to decode poor signals.
Read more
Reply
  • Like
Reactions: cyberham
Si.
Si.
Titanium said:
Yes, the LNBF has been incorrectly mounted 90 degrees out of rotation. Reference the skew "0" mark to the horizontal polarity, delete the current transponders then rescan. BUT.... being 90 degrees out of skew is not the cause of signal loss, The incorrect skew only creates transponder and channel lists with incorrect polarities displayed.

The Amiko STB Signal Quality readings were always a bit wonky. Does the V8 display SNR (or CNR) value for the Weigel transponder? If so, the V8 SNR readings to compare between the times of receiving and not receiving would be helpful. A SNR (or CNR) gives specific signal report vs an SQ reading that is just a manufacture's uncalibrated setting.

Also, the Weigel transponder 4180 H (DVBS2 FEC 5/6) requires a significantly better signal to decode than the Jewelry transponder 4140 H (DVBS FEC 3/4). FEC 5/6 means that 5 out of every 6 bits of data must be received to properly decode and display (83.33 %), The FEC 3/4 is more forgiving as 3 of 4 bits of data must be received to properly decode and display (75 %).

BTW... It is possible that the V8 satellite meter is simply capable of decoding the transport stream and display programming with a lower signal than the Amiko is capable of decoding. If this is the case, a different STB might provide a more sensitive tuner or better coding to decode poor signals.
Click to expand...
Thank you for your input. I will reposititon the LMB and try to peak the signal. Bit of a challange with a 6 foot ladder on a 10 foot dish.
Read more
Reply
Si.
Si.
Si. said:
Thank you for your input. I will reposititon the LMB and try to peak the signal. Bit of a challange with a 6 foot ladder on a 10 foot dish.
Click to expand...
Read more
Reply
Si.
Si.
Update. stood on ladder to rotate LNB.. Adjusted to peak signal. Bumped posititoner to get max input. Readjusted LNB .bumped dish again for max input. still the same symptoms. Gave up! put everything back where it was. Totally wiped receiver and rescanned available satellites. So far everything is working as it should with no glicthes or droplouts. Thanks for suggestions.
Read more
Reply
View all replies (8)
dishstaller
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in Internet Television (IPTV) Discussion Forum

Hughesnet cancelling email addresses

Wasn't exactly sure where to post this. Just had a customer come in inquiring about internet. He has HughesNet and had heard good things about mine. He asked if we provided email addresses and it kinda caught me off guard. I said he should be able to keep whatever email he had been using....my sister in law is still using a BellSouth email addy and they haven't been around here for many years. He said he had gotten a letter from HughesNet stating that they had until Nov 16th to save, move, forward, whatever, their Hughesnet emails because they would lose them after that date.

I have never heard of a company simply mass-deleting email accounts (the customer still has his HughesNet service). From what I understand, in the past, the company who was ditching their email service simply sold the customer base to a company like Google.

Anyone else getting this letter. He said he would show it to me tomorrow when I go out there and set up his internet.
Read more
4 Replies · 53 views
Load Replies (4) Reply Legacy View
Foxbat
Foxbat
Doing a Google of the HughesNet Email notice, it seems that HughesNet has been trying to eliminate hosting emails since 2019. And with HughesNet filing Chapter 11 back in August, it would be a smart move to switch to a more stable Email provider. Even AT&T farmed out their Email to Yahoo! years ago.

SpaceX's Starlink and the Cellular 5G Home Internet solutions have pretty much relegated HughesNet and its high latency, low bandwidth Internet service to History. If Earth had shorter days, maybe a Geostationary Internet Solution might have stood a fighting chance…
Read more
Reply
dishstaller
dishstaller
Well, I helped him set up a gmail acct....I actually wanted to see what the new process is for setting up a gmail acct since it had been years since I set mine up. Anyway, I showed him how to forward the emails he wanted to keep over.
Read more
Reply
navychop
navychop
Foxbat said:
If Earth had shorter days,
Click to expand...

Wouldn't we then die of old age sooner?

🙄
Read more
Reply
Foxbat
Foxbat
navychop said:
Wouldn't we then die of old age sooner?

🙄
Click to expand...
Still the same number of years, just more Sunsets…😉
Read more
Reply
dishstaller
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club

Man falls to his death on roller coaster at 6 Flags in GA

Can't help but wonder if a worker overlooked checking the harness. I rarely ride a roller coaster anymore but when I do I check the harness myself pretty aggressively.
Can't imagine what the son is going through.

www.dailymail.com

Dad levitated and bled then fell to his death from coaster

Eyewitnesses have shared fresh details of the horrific accident that happened at Six Flags Over Georgia on Monday afternoon.
www.dailymail.com www.dailymail.com
Read more
22 Replies · 172 views
Load Replies (22) Reply Legacy View
Jimbo
Jimbo
Back on the Goliath Roller Coaster ... I'm interested to find more details as well ...
Like where on the track did this happen (somewhere I read that it was on the climb up the top), which is impossible ...

They really need to take that ride and add at the very least, seatbelts ...

The Park is opening back up on Friday, the ride will Not be opening ... personally, I would keep it closed until different type of restraints can be designed and installed (over the winter).

I find it hard to believe that this ride is even allowed to be running with the restraints that exist at the moment, there are other rides that use the same type and they have been shut down across the country.

You got to believe that every ride has at least 2 types of restraint systems in place.

I wonder what and when we will hear from the Manufacturer ... and whatever governing bodies control these ...

Just think, this is a Major Amusement Park .... I would not have any problem getting on the Roller Coasters I have rode ...

Imagine what these County Fairs and others like them, I would not be caught Dead on one of them ... they get put up and tore down every other week, where is the safety for those rides ... No Thank You.
Read more
Reply
  • Like
Reactions: dishstaller
Jimbo
Jimbo
bgtsafari.com

Could B&M’s Patent on the “Clamshell” Ride Restraint Design Offer Clues as to What Happened on Goliath at Six Flags Over Georgia?

Incredibly sad news out of Six Flags Over Georgia as it’s being reported one man was killed after being ejected from Goliath, the B&M hyper coaster. Many news outlets have posted pictures of pe…
bgtsafari.com bgtsafari.com
Read more
Reply
navychop
navychop
Jimbo said:
I would not be caught Dead on one of them
Click to expand...

Yet IF you were on one, you might be caught dead.
Read more
Reply
dishstaller
dishstaller
Jimbo said:
bgtsafari.com

Could B&M’s Patent on the “Clamshell” Ride Restraint Design Offer Clues as to What Happened on Goliath at Six Flags Over Georgia?

Incredibly sad news out of Six Flags Over Georgia as it’s being reported one man was killed after being ejected from Goliath, the B&M hyper coaster. Many news outlets have posted pictures of pe…
bgtsafari.com bgtsafari.com
Click to expand...
Had no idea there were that many redundancies built into those restraints.
Read more
Reply
Jimbo
Jimbo
dishstaller said:
Had no idea there were that many redundancies built into those restraints.
Click to expand...
It makes sense, however, I would want more types of restraints, so if one doesn't work, the other does ... the restraints coming over the shoulder I would have expected ... with a Seat belt as last resort.

Fwiw, I inquired with what they use on Coasters at Cedar Point, various Coasters, different restraints according to what the car and track requires ...

NONE of the Coasters at CP use THAT particular system :)
I'm glad to see ...
Read more
Reply
dishstaller
dishstaller
Jimbo said:
with a Seat belt as last resort.
Click to expand...
According to the article, when you see a seat belt on a ride like this, it is basically used as a way of making sure the rider isn't too large/fat to safely ride the ride.
Read more
Reply
View all replies (22)
Ham Radio 2.0
· posted in Ham Radio 2.0

Kenwood TM-D750 vs ICOM ID-5200: Don't Buy One Before Watching This!

Time for another AWESOME video from Ham Radio 2.0!


View: https://www.youtube.com/watch?v=VGlC_BDgwZo


Direct YouTube Link - Kenwood TM-D750 vs ICOM ID-5200: Don't Buy One Before Watching This!
Ham Radio 2.0 Website
Ham Radio 2.0 on Facebook
Read more
0 Replies · 5 views
Replies Reply Legacy View
Former member 209992
Former member 209992
Last reply · posted in SatelliteGuys Support Center

Site is slooooow

For some reason, the satelliteguys.us site is loading a lot slower than usual on both Chrome on my Asus laptop and Safari on my iPhone.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
Read more
521 Replies · 17818 views
Load Replies (521) Reply Legacy View
  • Like
Reactions: charlesrshell
Scott Greczkowski
Scott Greczkowski
Ok the update is complete. :)
Read more
Reply
  • Like
Reactions: long_time_Dish, worstman1, Bobby and 2 others
Foxbat
Foxbat
Scott, I was having major issues getting connected around noon ET. Looks fine now. I captured a Safari session that was showing high CPU utilization in the Rendering of the page, like 90+%. I have a JSON file I created that I could share.
Read more
Reply
  • Like
Reactions: charlesrshell
Scott Greczkowski
Scott Greczkowski
Been using the site at that time and saw no issues. A quick look at the logs shows nothing strange.
Read more
Reply
  • Like
Reactions: charlesrshell and Foxbat
Foxbat
Foxbat
Yeah. It's probably something going on with the MacBook as my iPhone has been pretty snappy.
Read more
Reply
  • Like
Reactions: charlesrshell
Scott Greczkowski
Scott Greczkowski
I have been optimizing the site the past few days... and got us here now. :) We are rocking now!

Screenshot 2026-10-15 144737.webp
Read more
Reply
  • Like
Reactions: Foxbat, FTA4PA, worstman1 and 3 others
View all replies (521)
H
Houston Rockets
Last reply · posted in FTA Receiver / Equipment Support

OTHER  Mini Multiswitch

I just received 6 receiver 2 port mini Multiswitch and it work great, no external power need it, and you can connect 6 receiver instead of 4 on most Mini Multiswitches... If anyone is interested in where they can get one PM me....
IMG_1786.webp
Read more
2 Replies · 43 views
Load Replies (2) Reply Legacy View
Titanium
Titanium
Have you tested using external power? Over the years, have found unpowered polarity switching to be unreliable. Especially problematic when used with DiSEqC motors or switch stacking.
Read more
Reply
H
Houston Rockets
No I have not. I just got it the other day and it is connected to six receivers working just fine. What I do is non power mini multi-switches work best with LNBF's and with LNB's
Read more
Reply
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network

Tech News Weekly 459

Time for another AWESOME video from the TWIT Network!


View: https://www.youtube.com/watch?v=CELCVXF_wXA


Direct YouTube Link - Tech News Weekly 459
TWIT's Website
TWIT Live Feed
Read more
0 Replies · 6 views
Replies Reply Legacy View
TheRatPatrol
TheRatPatrol
Last reply · posted in TV Shows

NCIS

Anyone else watch this show? Any guesses as to what was in the box Gibbs gave to Abby that was on her desk? It look liked it was glowing.

I also heard that someone was leaving the show at the end of this season. Any guesses as to who thats going to be?
Read more
2129 Replies · 214619 views
Load Replies (2129) Reply Legacy View
TheRatPatrol
TheRatPatrol
Wait, Tony is the director now? Apologies, I stopped watching a while ago.
Read more
Reply
  • Wow
Reactions: Howard Simmons
Jimbo
Jimbo
TheRatPatrol said:
Wait, Tony is the director now? Apologies, I stopped watching a while ago.
Click to expand...
Was Gibbs still there when you quit watching ?
If so, A Lot has happened ....

It's been pretty good all along , once you get use to Gibbs being gone.
Read more
Reply
  • Like
Reactions: MikeD-C05
Jimbo
Jimbo
Jimbo
Jimbo said:

View: https://www.youtube.com/shorts/BIdMzUBHvjw?feature=share
Click to expand...

Howard ...
You don't like Tony, or Tony as the Director (he's only been there for 30 seconds now) or you don't like NCIS ?
Read more
Reply
  • Like
Reactions: Howard Simmons
Howard Simmons
Howard Simmons
Jimbo said:
Howard ...
You don't like Tony, or Tony as the Director (he's only been there for 30 seconds now) or you don't like NCIS ?
Click to expand...
Tony as the director.🙄
Read more
Reply
Jimbo
Jimbo
Howard Simmons said:
Tony as the director.🙄
Click to expand...
Would you rather have LaRoche ???
Read more
Reply
View all replies (2129)
iJustine
· posted in iJustine

Meet up in San Francisco! NVIDIA RTX Spark Meet & Greet 10/16!

Time for another AWESOME video from iJustine!


View: https://www.youtube.com/shorts/Qd-RuBfiRUM


Direct YouTube Link - Meet up in San Francisco! NVIDIA RTX Spark Meet & Greet 10/16!
The official iJustine Website's Website
Buy her book!
Read more
0 Replies · 7 views
Replies Reply Legacy View
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network

Apple's New Smart Home Ecosystem

Time for another AWESOME video from the TWIT Network!


View: https://www.youtube.com/shorts/VzOS-cQ-WkM


Direct YouTube Link - Apple's New Smart Home Ecosystem
TWIT's Website
TWIT Live Feed
Read more
0 Replies · 8 views
Replies Reply Legacy View
dishstaller
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club

4 ft LED tube bulbs now come with color selector

I bought the fixed color version of these bulbs for my store several years ago...work great and no more replacing ballast. Finally had one go out and when I went back to Amazon I saw that now they come in selectable versions so no more guess work as to what color light would do best in a certain area. They are now double OR single ended...used to be strictly one way or the other. If any of you are looking at replacing the old style 4 or 8 ft bulbs, you might want to give these a try. The 8 footers are BRIGHT. I put 5 in my shooting/target shed and you can get a decent tan if you are in there long enough.

Read more
1 Replies · 26 views
Load Replies (1) Reply Legacy View
  • Like
Reactions: Foxbat, navychop and comfortably_numb
Foxbat
Foxbat
When we re-lamped my in-Laws' house for sale last year, we were able to get all the Edison bulbs and a few fixtures with switch-selectable Color Temperature. We tried a few and settled on 3000°K as the best fit for the house. Matching the lighting in all the rooms made for an inviting experience. The Shop was the only place that we went with 4000°K for the LED 4' fixtures.

The house was sold within a month of going on the market, so we must have done something right.

The other advantage is if the new owners decide that they prefer a warmer light, they can unscrew the bulbs (I think it was close to 70 bulbs) and set them to the 2500K/2700K settings.

I'll have to check these out. Thanks!
Read more
Reply
  • Like
Reactions: dishstaller
Load More
Top
Back