Social Feed

nascarman3_8

Last reply May 16, 2006 · posted in DISH Network Support Forum

811 Trouble

I have an 811 HD receiver and ever since my install back in Jan. I've had to reboot it at least once a month. It goes to trying to "trying to acquire satelite" msg and switch test only indicates 1 instead of normal 3. So I unplug it for 10 or so seconds and it works fine after it goes thru reboot. Well lately it has gotten worse to the point where I gotta do it almost every day now. So I call Dish support and they say it's a problem with my receiver's software that they're aware of and working on an update but couldn't give me any idea when it will be done. Is anyone else having this trouble? It is extremely irritating as I do alot of timed recording for when I'm not home and my last 2 recoding have been blank because receiver failed again! Dish is absolutely refusing to do anything but tell me to unplug/replug the receiver which is getting ridiculous. They tell me I have to pay $49 to upgrade to the mpeg4 receiver plus pay for the HD programming. And if I don't get the HD pkg I still have to pay $6 a month just to have the ability to get HD programming. Which doesn't make any sense because if I don't get the HD pkg with my current receiver I don't have to pay that $6 charge. What's the difference??? Even if I downgrade to a non-HD receiver they still will charge me $49 for that!!! Is Dish always like this where they do absolutely nothing to try to appease their customers? Sorry if I'm rambling but it's pretty frustrating. Thanks!

20 Replies · 3075 views

Load Replies (20) Reply Legacy View

tjwgrr

May 10, 2006

Weezknight said:
Well I guess I have a pretty cool head about these things. Unplugging and plugging back in, isn't that much of a chore, so it's not a big deal to me......There's bigger things in life to fret about.

Wrong.

Should NOT have to do this- especially every day or at minimum every other day. I pay Dish Network gobs of money for their service & I've been a faithful subscriber since 1997. UNACCEPTABLE.

Don't have to reboot cable......... hmmm.

Weezknight

May 10, 2006

tjwgrr said:
Don't have to reboot cable......... hmmm.

Yes, but rebooting also doesn't cost me the extra $20-$30 per month that cable is going to charge me for the same HD and SD selections I get with E*. There are pros and cons to everything, and, as I said, there are worse things in this world.

aryes

May 15, 2006

Mine has had problems since Aug. 05

I am constantly having to disconnect all reciecers to reeboot the LNB. It is the 811 that sends out the problem to it, and by shutting down all units (or disconnecting the RG6 lines), it reboots it. I have just got off the phone with Dish Network and they will do nothing about it. They have been working on the software fix for at least 9 months. I do control software programming for large automated systems, and a prloblem like this should be fixed quite eaisily. Even more easy if there are other units that don't have the problem. Again they want to charge me $49 to downgrade for a woking unit without HD. I was in a fight with them on the phone about that I was promised a working system for my one year contract. I have the protection plan also, and they say that is for hardware problems, not software. They are knowingly shipping out bad units. Ihave even had the unit repalced once and the problem didn't go away.

I am back to DTV as soon as my contract runs out in 3 months. I would like to end it now, but the fight not to pay my last 3 months wouldn't be worth the hassle.

But I am now warning everyone I know away from Dish Network.

tnale

May 16, 2006

I also have problems with my 811. I have noticed it will need a reboot everytime that I turn it off with an OTA HD channel selected. So I have made it a habit to always select something else before turning it off for the evening, some non-OTA channel.
I have a patient who works for Dish as an engineer and he does confirm that this is a known software issue that they are supposedly working to fix, but it does seem that maybe they are not putting much effort into this. After all we shall all need MPEG4 units at some point in time.

Dog Town Dan

May 16, 2006

I've had an 811 for over two years now. I have had my original 811 replaced 4 times. Still have the same problems of having to reboot at least twice a week. The 811's are nothing but junk! As soon as they get my St. Louis locals up in HD I'm going to upgrade to a 211. Hopefully they are better.

View all replies (20)

Bruce

Supporting Founder Lifetime Supporter

Last reply 4 minutes ago · posted in Internet Television (IPTV) Discussion Forum

How things have changed

I was reading this article

Cable TV ‘cord-cutters’ became the majority in 2022

The steady decline of cable and broadcast television, and the rise of streaming services, reached a sort of inflection point over the past year. Last summer, for the first time, streaming ser…

thehill.com

That said this-
Last summer, for the first time, streaming services like Netflix and Amazon Prime claimed the largest share of the television viewing audience, surpassing both cable and broadcast TV. Streaming captured 34.8 percent of July viewers, according to Nielsen data, compared to 34.4 percent for cable and 21.6 percent for broadcast.

And then, sometime in the second half of 2022, cord-cutters became the majority. The share of cable and satellite television subscribers dipped to 48 percent, according to a report from Samba TV, a television technology company.

Now I do not consider those with YTTV and the likes, Cord Cutters, but they still do not have Traditional Cable/Satellite delivered Live TV, so I decided to do the math.

There are, now, 129 Million Households in the United States.

In 2015, there were 100 Million Cable/Sat Subscribers , no streaming Live TV Service.

Today, there are 66 Million Live TV subscribers, including Cable, Satellite and Streaming.

Roughly, Streaming Live TV has 14 Million subs including all of them.

So that means, Cable/Satellite now has, roughly, 51 Million Households

So in just 8 years, lost 49% of their subscribers and by the end of this year, expected sub count to be, roughly, 45 million households.

That means a total loss of 55% since 2015 at the end of 2023.

But out of 129 Million households, 45 million will mean only 35% will get Cable/Satellite Delivered Live TV by the end of 2023.

Imagine what 2024 will be like.

904 Replies · 72997 views

Load Replies (904) Reply Legacy View

Reactions: MikeD-C05

Bruce

Today at 5:36 AM

According to industry figures reported by Sports Media Watch, this year's World Series averaged 11.69 million viewers on FOX, down 26% from the 15.71 million average the 2025 series delivered.

Jimbo

40 minutes ago

Bruce said:
According to industry figures reported by Sports Media Watch, this year's World Series averaged 11.69 million viewers on FOX, down 26% from the 15.71 million average the 2025 series delivered.

That thier own stupidity ...

They make it hard to find the game when its on FOX 1 game, then FS1, then on Tru or some other little ity biyy channel that people rerely watch and can't find. (I don't know if FOX is TRU or not, but thats what I'm saying, they put games on obscure channels and expect people to easily find it and watch.

Reactions: AZ.

Bruce

24 minutes ago

Jimbo said:
That thier own stupidity ...

They make it hard to find the game when its on FOX 1 game, then FS1, then on Tru or some other little ity biyy channel that people rerely watch and can't find. (I don't know if FOX is TRU or not, but thats what I'm saying, they put games on obscure channels and expect people to easily find it and watch.

Every WS game was on the main Fox Broadcast Channel, what are you referring to?

AZ.

15 minutes ago

Bruce said:
Every WS game was on the main Fox Broadcast Channel, what are you referring to?

Throughout the playoffs most games were not over the air. They were on FS1 or TrueTV, HBO, TBS....So without a sports package you need FS1, and the others you need a old school TV package. If I had to guess, close to 75% of playoff games were not on free local TV.

Reactions: Jimbo

Jimbo

4 minutes ago

Bruce said:
Every WS game was on the main Fox Broadcast Channel, what are you referring to?

Playoffs ...

View all replies (904)

KAB

Pub Member / Supporter Lifetime Supporter

Last reply 7 minutes ago · posted in DISH Network Support Forum

Green Dot on WJ4?

Wireless Joey 4. Yesterday, I noticed a little green dot on a small black field in the upper right hand corner of the screen, regardless of channel, recordings, etc. A restart got rid of it, but I am curious as to what It meant and what I did to get it there.

1 Replies · 13 views

Load Replies (1) Reply Legacy View

Redneck_Randy

7 minutes ago

Google Search

The little green dot inside a small black field in the upper right-hand corner of your screen is an Android privacy indicator confirming that the voice remote's microphone is actively listening. Because the Joey 4 runs on an Android

Reactions: charlesrshell

TFLEV

49 minutes ago · posted in TFLEV

2027 Jeep Recon Review - So Fun…So Flawed!

Time for another AWESOME video from TFL Electric Vehicles!

View: https://www.youtube.com/watch?v=T7yHkohaRjA

Direct YouTube Link - 2027 Jeep Recon Review - So Fun…So Flawed!

0 Replies · 6 views

Replies Reply Legacy View

Scott Greczkowski

Staff member HERE TO HELP YOU! Cutting Edge

Last reply Today at 5:52 AM · posted in The Chit Chat Club

Song Name Game Part 3!

Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne

Get it?

An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....

68786 Replies · 2688487 views

Load Replies (68786) Reply Legacy View

Reactions: c-spand

long_time_Dish

Yesterday at 4:19 PM

My Maria - Brooks & Dunn

Reactions: ClarkGable, dishstaller, RaiderPower and 1 other person

RaiderPower

Yesterday at 7:06 PM

My Maria - B.W. Stevenson

Reactions: ClarkGable, Bobby, long_time_Dish and 1 other person

long_time_Dish

Yesterday at 8:05 PM

Don't Lose My ~~Numb~~er - Phil Collins

hwkn

Today at 3:05 AM

Rikki DON'T LOSE That NUMBER-Steely Dan

Reactions: ClarkGable

ClarkGable

Today at 5:52 AM

Longer - Dan Fogelberg

View all replies (68786)

Gray Hair

Lifetime Supporter

Last reply Yesterday at 11:39 PM · posted in Computers and Gadgets

Repair DX100 American Electrola Radio, AM FM SW?

I have a DX100 American Electrola Radio, AM FM SW. It is a receiver only, which quit working many years ago. Several years ago the seller had stated that capacitors would need replaced because they go bad.

In this particular xxx://www.youtube.com/watch?v=3zUbXgNT8Oo they mentioned the backup battery being the problem.

Several years back when asking about having the capacitors replaced one former repairman said send it back to the factory, well there is not any. Another response several years ago from a person who repaired circuit boards for industry said they could repair it if they had a schematic, again I do not have.

This radio was built in Pittsburgh, PA out of as many American parts as they could find. Your thoughts on getting the radio to work?

24 Replies · 8284 views

Load Replies (24) Reply Legacy View

deheza

Jul 1, 2013

I can e-mail you pdf copies of the the manuals and schematics. The tuning not working is probably the tuning encoder. I recently found one that fits my DXC-100 from Mouser Electronic Supply. I'll be glad to include the encoder part number used to repair my radio. My radio doesn't have the battery so may be a bit different than mine.

Reactions: Gray Hair

Gray Hair

Dec 27, 2013

deheza said:
I can e-mail you pdf copies of the the manuals and schematics. The tuning not working is probably the tuning encoder. I recently found one that fits my DXC-100 from Mouser Electronic Supply. I'll be glad to include the encoder part number used to repair my radio. My radio doesn't have the battery so may be a bit different than mine.

Deheza,

Thanks for your information and offer. My Radio is actually a DXC 100 as well, was a typo in the title. Am puzzled by yours not having the battery, since they only made two runs. While the schematics would be great, I believe by the amount of views it would be better to post all the information here.

I see where numerous people have posted pdf files, just not sure how they do it.

Sorry about the long response time, just was not sure how to handle it.

Thanks,

Respectively,

Gray Hair

. Raine

Dec 28, 2013

If you change that diode, make sure you know what type it is, a regular rectifier, zener, whatever, don't just throw any old diode in. Try to read the number on it and look it up. Do you have a multimeter? A lot of the things in there can be easily checked with a meter.

Trying to run it off a clean 12 V source like a battery would be a good idea, like someone else suggested. In a couple of your pictures there's a 9v regulator [7809CT], and I think I saw a 5 V regulator [7805]. The 5v probably supplies the display and the 9v the radio circuitry. If you have a meter that would be a first place to check, check the three pins on each for a 12v input, a gnd, a 5v output on the 5v and a 9v output on the 9v. Bad solder connections is another good possibility.

That radio looks to be in nice shape inside. It doesn't look like anyone's worked it over, looks nice.

The back-up battery is probably just for a memory function, when you replace it make sure you use the same type, cadmium, lithium-ion, whatever it is, it should say on it what type it is and the voltage, or have a part# that can be looked up.

Reactions: Gray Hair

OZ65

Jan 31, 2024

I have just started working on one of these and could really use the schematics and a copy of the manual - can anybody send them to me or attach a link? I did construct a manual from "azenithnut" , but his zip file is missing pages 16,17. My radio display only briefly lights up when powered on. the tuner and audio section appears to work fine. I have already replaced the back-up battery. I have the second generation radio. TIA

Revenerd

Yesterday at 6:15 PM

Another necropost here. I picked one of these up today. Does anyone out there have this manual (I'd take schematics too). I too found azenithnut's post with the missing pages 16 and 17.

(((Garyd)))

Yesterday at 11:39 PM

OZ65 said:
I have just started working on one of these and could really use the schematics and a copy of the manual - can anybody send them to me or attach a link? I did construct a manual from "azenithnut" , but his zip file is missing pages 16,17. My radio display only briefly lights up when powered on. the tuner and audio section appears to work fine. I have already replaced the back-up battery. I have the second generation radio. TIA

Can you send the serial-number label and photos of the tuner board, that should help distinguish its circuit revision; collector records say serials marked OB were the second production run. Use a heat gun or hair dryer to find bad caps if it works for A FEW SECONDS ITS A BAD CAP, THAN ONLY HEAT HALF OF THE RADIO

View all replies (24)

TWiT Tech Podcast Network

Yesterday at 5:32 PM · posted in TWiT Tech Podcast Network

This Week in Tech 1109

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/watch?v=okJLytKRbDY

Direct YouTube Link - This Week in Tech 1109
TWIT's Website
TWIT Live Feed

0 Replies · 48 views

Replies Reply Legacy View

TWiT Tech Podcast Network

Yesterday at 5:32 PM · posted in TWiT Tech Podcast Network

The Agentic Web & When AI Agents Escape Their Sandbox

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/shorts/rwJNDSWjwDY

Direct YouTube Link - The Agentic Web & When AI Agents Escape Their Sandbox
TWIT's Website
TWIT Live Feed

0 Replies · 46 views

Replies Reply Legacy View

garyreno

Last reply Yesterday at 5:12 PM · posted in DISH Network Support Forum

Updated to H715 on a Hopper 3 from H713

After a strange reboot last night in the middle of viewing, this morning several more reboots and about a half an hour download.

3 Replies · 285 views

Load Replies (3) Reply Legacy View

Reactions: Almighty1, reubenray and LQQK

Almighty1

Saturday at 3:03 PM

Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?

https://www.satelliteguys.us/xen/th...ftware-version-713-is-out.423921/post-5108817

Reactions: charlesrshell

jsmit86

Yesterday at 9:54 AM

Almighty1 said:
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?

https://www.satelliteguys.us/xen/th...ftware-version-713-is-out.423921/post-5108817

I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.

Reactions: Almighty1, reubenray and charlesrshell

Almighty1

Yesterday at 5:12 PM

jsmit86 said:
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.

Interesting, is QE "Beta" or Test version different than the H708 you had mentioned that they rolled you back to or is that a newer version after that?

Reactions: charlesrshell

Ramy

Supporting Founder

Last reply Yesterday at 4:20 PM · posted in The Sports Section

2026-27 NCAA College Football

Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.

190 Replies · 3644 views

Load Replies (190) Reply Legacy View

Reactions: Mike0616

Ronnie-

Yesterday at 3:11 PM

The game time was just a product of so many top 25 matchups. I think they said it was the most in one day since the 1930s.

Not everyone can play at night and get a tv slot.

Of course Lane is gonna complain. It's what he does.

Roll tide.

Jimbo

Yesterday at 3:23 PM

Ronnie- said:
The game time was just a product of so many top 25 matchups. I think they said it was the most in one day since the 1930s.

Not everyone can play at night and get a tv slot.

Of course Lane is gonna complain. It's what he does.

Roll tide.

With Streaming, they should all be able to be on at night, no issue with TV slots

(Everybody can be on Peacock ... :argue

)

Ronnie-

Yesterday at 3:28 PM

Jimbo said:
With Streaming, they should all be able to be on at night, no issue with TV slots

(Everybody can be on Peacock ... )

Could. Yes.

But you know as well as I that they are not going A: put all of their prime matchups on at the same time. And B: take their main games off of the main channels.

You had bama vs lsu, and Georgia vs Ole Miss to choose from.

Considering Georgia had beaten Bama and Ole Miss had beaten LSU, I can see that why they chose that game for the night matchup (without the benefit of hindsight as to how the game's Saturday would play out).

You also had Tennessee vs Kentucky to fit in the mix.

Someone had to be at 2:30. Which imo is honestly my preferred slot for bama games no matter who they are playing or where.

None of them was going to be a streaming only game, and none where going on an "alternate" channel.

Jimbo

Yesterday at 3:58 PM

Ronnie- said:
Could. Yes.

But you know as well as I that they are not going A: put all of their prime matchups on at the same time. And B: take their main games off of the main channels.

You had bama vs lsu, and Georgia vs Ole Miss to choose from.

Considering Georgia had beaten Bama and Ole Miss had beaten LSU, I can see that why they chose that game for the night matchup (without the benefit of hindsight as to how the game's Saturday would play out).

You also had Tennessee vs Kentucky to fit in the mix.

Someone had to be at 2:30. Which imo is honestly my preferred slot for bama games no matter who they are playing or where.

None of them was going to be a streaming only game, and none where going on an "alternate" channel.

Of course ... but they Could.

Did you realize how early that Utah vs BYU game was Saturday ... I believe it was 12 Noon EST, they are in Mountain time zone, which means they started thier game a 10 AM.

Ronnie-

Yesterday at 4:20 PM

Jimbo said:
Of course ... but they Could.

Yes. I even said so. But for reasons I gave, they won't. Wouldn't make sense for them too and they would lose money. A lot of these people that watch one of these games, watch more than one.

They want those eyeballs on as many games as possible. It just makes financial sense.

Jimbo said:
Did you realize how early that Utah vs BYU game was Saturday ... I believe it was 12 Noon EST, they are in Mountain time zone, which means they started thier game a 10 AM.

It was early. Sure.

View all replies (190)

dfergie

Staff member HERE TO HELP YOU!

Last reply Yesterday at 3:41 PM · posted in What's Cooking?

What's For Lunch?

We have a Breakfast and Dinner thread so...

Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...

5453 Replies · 337027 views

Load Replies (5453) Reply Legacy View