Social Feed

Main Feed My Feed
B
bhelms
Lifetime Supporter
Last reply · posted in DISH Network Support Forum

622 with "no HDMI" problem - any solutions?

Hi, folks! I searched the threads and I have seen a number of reports of the 622 not having any HDMI output, since this is my current dilemma as well. But I could not see in any of those threads that anyone ever found a solution. Is there anything I should try before I call E* tech service (again!) for a swap?

The HDMI/HDMI cable was tested in another system at BB and seems to work OK. I have not tried another cable yet as I don't have one and I'm not inclined to pony-up at least $50 to a local store for just an experiment, especially given the fact that the one I have is proven OK in another system.

TV = Sony Bravia. HDMI/DVI from 811 works OK, but not the HDMI/HDMI from the 622. The composite and component connections from the 622 to the TV work and everything else I have tested on the 622 so far works OK (except for perhaps the 622's OTA tuner, but that's a topic for another thread!). I did try several HDTV set-up options (menu - 6 - 8 screen). The Sony supports both 720p and 1080i. 622 SW = 3.56 (I think).

Any thoughts/other experiences would be appreciated! TIA and BRgds...
Read more
6 Replies · 2177 views
Load Replies (6) Reply Legacy View
capman
capman
Yeah, I'm having the same problem. I usually have the jiggle the HDMI cable to get it to work again for the day. For some strange reason though, when the receiver turns off to check for updates the problem is there again and I have to jiggle and unplug the HDMI cable. I'm sure if I continue to do this, the connectors will go bad and I will have to ask dish for a new unit.

On another note, do you guys notice any difference between HDMI and component? If there is no difference I guess I could live without the HDMI if it became disabled. Thanks
Read more
Reply
B
bhelms
Dish sez "Live with it"...!

Tks for the replies! I had my HDMIx2 cable tested at BB - worked OK, then I bought another one at Wal*Mart and tried that - neither made any difference. In the HDMI input my Sony Bravia LCD TV shows only a blank screen and there is no audio to the TV (optical audio to the SS system is OK).

So I called E* tech support again and in a coincidence got the same tech that answered my call from Monday! The call went well (25 minutes), the tech was polite, competent, and stayed with me until I was "satisfied", but I did not get any immediate results. In a bit of a slip, the tech admitted that this is a "known problem". He later recanted that, then when I tried to pin him down on it, he stated that it was not an "official" known problem. (What double-talk !!)

He talked to his engineering group twice with me on hold briefly each time. He took a bunch of information supposedly requested by the engineering group including my TV type (Sony KDLV40XBR1) and cable types used, and had me read back a bunch of info from the set-up and system screens. He stated that mostly Sony and Mitsubishi TV owners are reporting this problem, which is some sort of incompatibility between the HDMI data exchanges. I said that confounded me since the 811 worked OK with the DVI/HDMI connection, to which the tech responded that there is a big difference between the DVI data and HDMI data (I need to investigate that some more) and that result - works OK on DVI, not on HDMI - is possible.

Soo - The "engineers are working on something to fix the incompatibility" that will likely result in some SW or bootstrap change, more likely the latter. Since the component connections are working OK the tech asked for my patience while they work on the issue, I asked how long, and he said give them 2 weeks. I guess I'm willing to do that, but I will eventually demand a new 622 to try if they can't give me something more substantial in 2 weeks. Component is OK, but I want what I paid for !!

Incidentally, I tried jiggling the cable (seems kinda loose especially on the TV end) and I did notice some scrambled junk/patterns flash across the screen, but that would not resolve to a picture and as soon as I stopped the motion (I am also worried about damaging the connectors) the screen went black again.

Like capman asked - how much difference is noticed between the HDMI and component connections? The HDTV I can watch looks about the same as what the 811 was giving me with the DVI/HDMI working. I never tried the 811 with component.

I encourage others who are/were having this problem to report in with their TV type and I will feed this information back to E* next time I call. I will also continue to update, and add this same thread to my blog.

Thanks for your feedback and support. Together we can force the issue with E* !!
Read more
Reply
R
rmoore3d
Bhelms

I have the exact same Sony TV in my bedroom and have no problem with the HDMI connection from my 622, so don't let them tell you it is Sony's fault. By the way I love the TV, how about you.
Read more
Reply
B
bhelms
rmoore3d said:
Bhelms

I have the exact same Sony TV in my bedroom and have no problem with the HDMI connection from my 622, so don't let them tell you it is Sony's fault. By the way I love the TV, how about you.
Click to expand...
Tks, rmoore3d !! This is EXACTLY the kind of feedback I need to push under E*'s nose! In fairness the E* tech never said or implied that it's Sony's fault, only that there are "compatibility problems with some manufacturers' HDMI inputs". Unfortunately I am not convinced that they will ever solve that "problem", but per your information it is certainly NOT a problem with all Sony/622 combinations...!

I also love that TV! I was VERY close to buying a 42" Panny plasma monitor when I stumbled onto the Sony. Since I was replacing a 14 y.o. 27" XBR, the choice of and transition to the XBR Bravia was natural! I admit that the LCD has less grayscale, but other than that I think the LCD is superior to the other 40-42" displays I was comparing it to, and there were many! My only reservation about the Sony was its lack of PIP (wtf...!), but that is solved by the 622.

I have 1 "weak" pixel in the margin. It's not dead or stuck on, but in a very bright scene, this one green element is not as bright as all the others so that group of 3 shows-up kinda reddish. In darker scenes you don't see any difference. You have to be about 3' or less from the TV to even notice it. I noticed this one about 2 weeks after I got the TV, but it may have been there from the start. This causes me to pay a LOT of attention to all the rest of the screen ever since and there have been no other pixel issues seen. (I am rather sensitive to LCD pixel problems due to computer screen issues.)

Other than that I consider this a "perfect" TV for its location. I have it connected to a Sony "Dream" SS system and that sounds good, not great but good enough. I only use the internal speakers rarely. The OTA tuner is somewhat better than the 811's and (unfortunately!) quite superior to the 622's! I'm in a marginal OTA signal area, so this will need some work.

I'll give E* 2 weeks to "correct" the HDMI problem as I mentioned, but after that I will ask for the replacement.

Again, your feedback on the exact same set-up is very valuable for my cause.

Anyone else...?

TIA and BRgds...
Read more
Reply
BobMurdoch
BobMurdoch
I had my first issue yesterday with my HDMI port. I have an HDMI/DVI adapter in place, and the picture went to black with no warning. I switched to an analog feed that runs throughmy DVD recorder and the picture was fine. I tried switching to 720p from 1080i to try and clear it, but to no avail. I went to reboot and I saw it jump to a perfect image (I was watching ESPNews) for a 1/4 second before it went black to do the reboot. I turned it off and rebooted 3 more times as I tried it without the HDMI, with it, and then replugged the cord in. I don't know what I did, but the picture came back.

This was the first time I've had a problem with the output since I got it a few months ago. I'm debating whether or not to pick up another Component cable to keep as a backup. If the output does fail, I don't want to lose my recordings, so I will try and limp through the summer until I catch up and then I can arrange a swap if I have to.
Read more
Reply
View all replies (6)
TFLEV
· posted in TFLEV

2027 Jeep Recon Review - So Fun…So Flawed!

Time for another AWESOME video from TFL Electric Vehicles!


View: https://www.youtube.com/watch?v=T7yHkohaRjA


Direct YouTube Link - 2027 Jeep Recon Review - So Fun…So Flawed!
Read more
0 Replies · 0 views
Replies Reply Legacy View
KAB
KAB
Pub Member / Supporter Lifetime Supporter
· posted in DISH Network Support Forum

Green Dot on WJ4?

Wireless Joey 4. Yesterday, I noticed a little green dot on a small black field in the upper right hand corner of the screen, regardless of channel, recordings, etc. A restart got rid of it, but I am curious as to what It meant and what I did to get it there.
Read more
0 Replies · 2 views
Replies Reply Legacy View
Scott Greczkowski
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club

Song Name Game Part 3!

Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
Read more
68786 Replies · 2688462 views
Load Replies (68786) Reply Legacy View
  • Like
Reactions: c-spand
long_time_Dish
long_time_Dish
My Maria - Brooks & Dunn
Read more
Reply
  • Like
  • Love
Reactions: ClarkGable, dishstaller, RaiderPower and 1 other person
RaiderPower
long_time_Dish
long_time_Dish
Don't Lose My Number - Phil Collins
Read more
Reply
H
hwkn
Rikki DON'T LOSE That NUMBER-Steely Dan
Read more
Reply
  • Like
Reactions: ClarkGable
ClarkGable
ClarkGable
Longer - Dan Fogelberg
Read more
Reply
View all replies (68786)
Bruce
Bruce
Supporting Founder Lifetime Supporter
Last reply · posted in Internet Television (IPTV) Discussion Forum

How things have changed

I was reading this article

thehill.com

Cable TV ‘cord-cutters’ became the majority in 2022

The steady decline of cable and broadcast television, and the rise of streaming services, reached a sort of inflection point over the past year. Last summer, for the first time, streaming ser…
thehill.com thehill.com

That said this-
Last summer, for the first time, streaming services like Netflix and Amazon Prime claimed the largest share of the television viewing audience, surpassing both cable and broadcast TV. Streaming captured 34.8 percent of July viewers, according to Nielsen data, compared to 34.4 percent for cable and 21.6 percent for broadcast.

And then, sometime in the second half of 2022, cord-cutters became the majority. The share of cable and satellite television subscribers dipped to 48 percent, according to a report from Samba TV, a television technology company.

Now I do not consider those with YTTV and the likes, Cord Cutters, but they still do not have Traditional Cable/Satellite delivered Live TV, so I decided to do the math.

There are, now, 129 Million Households in the United States.

In 2015, there were 100 Million Cable/Sat Subscribers , no streaming Live TV Service.

Today, there are 66 Million Live TV subscribers, including Cable, Satellite and Streaming.

Roughly, Streaming Live TV has 14 Million subs including all of them.

So that means, Cable/Satellite now has, roughly, 51 Million Households

So in just 8 years, lost 49% of their subscribers and by the end of this year, expected sub count to be, roughly, 45 million households.

That means a total loss of 55% since 2015 at the end of 2023.

But out of 129 Million households, 45 million will mean only 35% will get Cable/Satellite Delivered Live TV by the end of 2023.

Imagine what 2024 will be like.
Read more
900 Replies · 72988 views
Load Replies (900) Reply Legacy View
  • Wow
Reactions: MikeD-C05
Jimbo
dishstaller
dishstaller
Jimbo said:

View: https://www.youtube.com/shorts/u4rACh-Tt5k?feature=share
Click to expand...

Funny thing is that as the screen size and pic quality increase, the quality of the programming has DEcreased.
Read more
Reply
  • Sad
Reactions: Jimbo
MikeD-C05
dishdude
dishdude
MikeD-C05 said:
skipped the OLED Tv entirely?
Click to expand...

AI slop
Read more
Reply
  • Like
Reactions: Foxbat and MikeD-C05
Bruce
Bruce
According to industry figures reported by Sports Media Watch, this year's World Series averaged 11.69 million viewers on FOX, down 26% from the 15.71 million average the 2025 series delivered.
Read more
Reply
View all replies (900)
G
Gray Hair
Lifetime Supporter
Last reply · posted in Computers and Gadgets

Repair DX100 American Electrola Radio, AM FM SW?

I have a DX100 American Electrola Radio, AM FM SW. It is a receiver only, which quit working many years ago. Several years ago the seller had stated that capacitors would need replaced because they go bad.

In this particular xxx://www.youtube.com/watch?v=3zUbXgNT8Oo they mentioned the backup battery being the problem.

Several years back when asking about having the capacitors replaced one former repairman said send it back to the factory, well there is not any. Another response several years ago from a person who repaired circuit boards for industry said they could repair it if they had a schematic, again I do not have.

This radio was built in Pittsburgh, PA out of as many American parts as they could find. Your thoughts on getting the radio to work?
Read more
24 Replies · 8282 views
Load Replies (24) Reply Legacy View
D
deheza
I can e-mail you pdf copies of the the manuals and schematics. The tuning not working is probably the tuning encoder. I recently found one that fits my DXC-100 from Mouser Electronic Supply. I'll be glad to include the encoder part number used to repair my radio. My radio doesn't have the battery so may be a bit different than mine.
Read more
Reply
  • Like
Reactions: Gray Hair
G
Gray Hair
deheza said:
I can e-mail you pdf copies of the the manuals and schematics. The tuning not working is probably the tuning encoder. I recently found one that fits my DXC-100 from Mouser Electronic Supply. I'll be glad to include the encoder part number used to repair my radio. My radio doesn't have the battery so may be a bit different than mine.
Click to expand...

Deheza,

Thanks for your information and offer. My Radio is actually a DXC 100 as well, was a typo in the title. Am puzzled by yours not having the battery, since they only made two runs. While the schematics would be great, I believe by the amount of views it would be better to post all the information here.

I see where numerous people have posted pdf files, just not sure how they do it.

Sorry about the long response time, just was not sure how to handle it.

Thanks,

Respectively,

Gray Hair
Read more
Reply
. Raine
. Raine
If you change that diode, make sure you know what type it is, a regular rectifier, zener, whatever, don't just throw any old diode in. Try to read the number on it and look it up. Do you have a multimeter? A lot of the things in there can be easily checked with a meter.

Trying to run it off a clean 12 V source like a battery would be a good idea, like someone else suggested. In a couple of your pictures there's a 9v regulator [7809CT], and I think I saw a 5 V regulator [7805]. The 5v probably supplies the display and the 9v the radio circuitry. If you have a meter that would be a first place to check, check the three pins on each for a 12v input, a gnd, a 5v output on the 5v and a 9v output on the 9v. Bad solder connections is another good possibility.

That radio looks to be in nice shape inside. It doesn't look like anyone's worked it over, looks nice.

The back-up battery is probably just for a memory function, when you replace it make sure you use the same type, cadmium, lithium-ion, whatever it is, it should say on it what type it is and the voltage, or have a part# that can be looked up.
Read more
Reply
  • Like
Reactions: Gray Hair
O
OZ65
I have just started working on one of these and could really use the schematics and a copy of the manual - can anybody send them to me or attach a link? I did construct a manual from "azenithnut" , but his zip file is missing pages 16,17. My radio display only briefly lights up when powered on. the tuner and audio section appears to work fine. I have already replaced the back-up battery. I have the second generation radio. TIA
Read more
Reply
Revenerd
Revenerd
Another necropost here. I picked one of these up today. Does anyone out there have this manual (I'd take schematics too). I too found azenithnut's post with the missing pages 16 and 17.
Read more
Reply
(((Garyd)))
(((Garyd)))
OZ65 said:
I have just started working on one of these and could really use the schematics and a copy of the manual - can anybody send them to me or attach a link? I did construct a manual from "azenithnut" , but his zip file is missing pages 16,17. My radio display only briefly lights up when powered on. the tuner and audio section appears to work fine. I have already replaced the back-up battery. I have the second generation radio. TIA
Click to expand...
Can you send the serial-number label and photos of the tuner board, that should help distinguish its circuit revision; collector records say serials marked OB were the second production run. Use a heat gun or hair dryer to find bad caps if it works for A FEW SECONDS ITS A BAD CAP, THAN ONLY HEAT HALF OF THE RADIO
Read more
Reply
View all replies (24)
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network

This Week in Tech 1109

Time for another AWESOME video from the TWIT Network!


View: https://www.youtube.com/watch?v=okJLytKRbDY


Direct YouTube Link - This Week in Tech 1109
TWIT's Website
TWIT Live Feed
Read more
0 Replies · 48 views
Replies Reply Legacy View
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network

The Agentic Web & When AI Agents Escape Their Sandbox

Time for another AWESOME video from the TWIT Network!


View: https://www.youtube.com/shorts/rwJNDSWjwDY


Direct YouTube Link - The Agentic Web & When AI Agents Escape Their Sandbox
TWIT's Website
TWIT Live Feed
Read more
0 Replies · 46 views
Replies Reply Legacy View
G
garyreno
Last reply · posted in DISH Network Support Forum

Updated to H715 on a Hopper 3 from H713

After a strange reboot last night in the middle of viewing, this morning several more reboots and about a half an hour download.
Read more
3 Replies · 279 views
Load Replies (3) Reply Legacy View
  • Like
Reactions: Almighty1, reubenray and LQQK
Almighty1
Almighty1
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
Read more
Reply
  • Like
Reactions: charlesrshell
jsmit86
jsmit86
Almighty1 said:
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
Click to expand...
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
Read more
Reply
  • Like
Reactions: Almighty1, reubenray and charlesrshell
Almighty1
Almighty1
jsmit86 said:
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
Click to expand...
Interesting, is QE "Beta" or Test version different than the H708 you had mentioned that they rolled you back to or is that a newer version after that?
Read more
Reply
  • Like
Reactions: charlesrshell
Ramy
Ramy
Supporting Founder
Last reply · posted in The Sports Section

2026-27 NCAA College Football

Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
Read more
190 Replies · 3643 views
Load Replies (190) Reply Legacy View
  • Haha
Reactions: Mike0616
Ronnie-
Ronnie-
The game time was just a product of so many top 25 matchups. I think they said it was the most in one day since the 1930s.

Not everyone can play at night and get a tv slot.

Of course Lane is gonna complain. It's what he does.


Roll tide.
Read more
Reply
Jimbo
Jimbo
Ronnie- said:
The game time was just a product of so many top 25 matchups. I think they said it was the most in one day since the 1930s.

Not everyone can play at night and get a tv slot.

Of course Lane is gonna complain. It's what he does.


Roll tide.
Click to expand...
With Streaming, they should all be able to be on at night, no issue with TV slots :(

(Everybody can be on Peacock ... :argue:mad:) :tombstone
Read more
Reply
Ronnie-
Ronnie-
Jimbo said:
With Streaming, they should all be able to be on at night, no issue with TV slots :(

(Everybody can be on Peacock ... :argue:mad:) :tombstone
Click to expand...
Could. Yes.

But you know as well as I that they are not going A: put all of their prime matchups on at the same time. And B: take their main games off of the main channels.


You had bama vs lsu, and Georgia vs Ole Miss to choose from.

Considering Georgia had beaten Bama and Ole Miss had beaten LSU, I can see that why they chose that game for the night matchup (without the benefit of hindsight as to how the game's Saturday would play out).

You also had Tennessee vs Kentucky to fit in the mix.


Someone had to be at 2:30. Which imo is honestly my preferred slot for bama games no matter who they are playing or where.


None of them was going to be a streaming only game, and none where going on an "alternate" channel.
Read more
Reply
Jimbo
Jimbo
Ronnie- said:
Could. Yes.

But you know as well as I that they are not going A: put all of their prime matchups on at the same time. And B: take their main games off of the main channels.


You had bama vs lsu, and Georgia vs Ole Miss to choose from.

Considering Georgia had beaten Bama and Ole Miss had beaten LSU, I can see that why they chose that game for the night matchup (without the benefit of hindsight as to how the game's Saturday would play out).

You also had Tennessee vs Kentucky to fit in the mix.


Someone had to be at 2:30. Which imo is honestly my preferred slot for bama games no matter who they are playing or where.


None of them was going to be a streaming only game, and none where going on an "alternate" channel.
Click to expand...
Of course ... but they Could.

Did you realize how early that Utah vs BYU game was Saturday ... I believe it was 12 Noon EST, they are in Mountain time zone, which means they started thier game a 10 AM.
Read more
Reply
Ronnie-
Ronnie-
Jimbo said:
Of course ... but they Could.
Click to expand...
Yes. I even said so. But for reasons I gave, they won't. Wouldn't make sense for them too and they would lose money. A lot of these people that watch one of these games, watch more than one.

They want those eyeballs on as many games as possible. It just makes financial sense.

Jimbo said:
Did you realize how early that Utah vs BYU game was Saturday ... I believe it was 12 Noon EST, they are in Mountain time zone, which means they started thier game a 10 AM.
Click to expand...
It was early. Sure.
Read more
Reply
View all replies (190)
dfergie
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?

What's For Lunch?

We have a Breakfast and Dinner thread so... :)
Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...
Read more
5453 Replies · 337026 views
Load Replies (5453) Reply Legacy View
TRG
TRG
Tuna salad sandwich on toasted honey whole wheat bread with a handful of kettle chips. Water.
Read more
Reply
  • Like
Reactions: Bobby
TRG
TRG
Breakfast for lunch. Crispy corned beef hash, home fries, two over easy eggs and sourdough toast.

1653.webp
Read more
Reply
  • Like
Reactions: dfergie, osu1991 and Bobby
TRG
TRG
Grabbed a burrito on the run. Beef, pinto beans, green chile and cheese. Stewart's cream soda.

burr.webp
Read more
Reply
  • Like
Reactions: Mr Tony and dfergie
dfergie
dfergie
Beef, bean green chile, cheese homemade burritos here... Water
Read more
Reply
  • Like
Reactions: TRG
dfergie
dfergie
Juicy Lucy jalapeño burger… Tea
Read more
Reply
  • Like
Reactions: TRG
View all replies (5453)
Load More
Top
Back