I just got a 741U c band lnb and when i hook it up to my pansat the screen goes blank and cannot see the menu from the pansat unit. I hooked up a KU band LNB and it is fine. Do i have a bad lnb and how do i tell.
741U C band LNBF Bad?
- Thread starter perazzimx15l
- Start date
- Latest activity Latest activity:
- Replies 7
- Views 2K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
- Status
I have a DMX741 standard and it has been working very well for me on both c and ku. The setup is alittle different with the 741u compared to the standard.maybe you just have some setting wrong!Im sure someone will be around to help.
I have both the DMX741 & the DMX741U...They both work fine.
How do you have your RG6 cable hooked up
How do you have your RG6 cable hooked up
perazzimx I just noticed! are you trying to use a 741 with a 36" dish? If so i have heard that the 741 will not do so good with a dish less than 6 ft
No, but i got it on my new 6' wsi special and found out what was wrong and i have it fixed. Wating on a FS1.
Got my FS1 meter i have signal, but can not get a lock i have the lnb to the lnb and recv. to recv. and i have heard that the 22K has to be on the FS1 and so if this is true. Please let me know. thanks for your help so far.
- Status
