I have an AKAI PT4298HD lcd projection tv and the red is no longer correctly aligning with the rest of the colors. I have heard this is a common problem. I am wondering if anyone knows 1- where to get the parts needed and 2- if this is in fact the convergence ic? Any help is greatly appreciated. Thanks.
akai pt4298hd convergence problem?
- Thread starter mooreck3
- Start date
- Latest activity Latest activity:
- Replies 4
- Views 7K
Try contacting these guys: http://www.smartcalibration.com/
or maybe try this: http://lcd-tv-calibration.workshops.help.com/
or maybe try this: http://lcd-tv-calibration.workshops.help.com/
Check this out. I think will answer your questions.
http://www.tv-forums.com/forum/TV_E...hd_projection_with_red_and_blue_lines_P20941/
http://www.tv-forums.com/forum/TV_E..._HCM422W/HCM4216W_convergence_problem_P18475/
BTW you have a CRT Rear Projection not a LCD.
http://www.tv-forums.com/forum/TV_E...hd_projection_with_red_and_blue_lines_P20941/
http://www.tv-forums.com/forum/TV_E..._HCM422W/HCM4216W_convergence_problem_P18475/
BTW you have a CRT Rear Projection not a LCD.
Last edited:
new problem same item
I followed the above instructions and the tv is working I ordered the service manual from manualsonline.com. I did the tuning and manual convergence but it says to do the perfect focus in factory mode. how do I go to factory mode?
the tv won't perfect focus now it says check factory setting. my thought is it has to be done in factory mode before I can do it from the menu screen.
I followed the above instructions and the tv is working I ordered the service manual from manualsonline.com. I did the tuning and manual convergence but it says to do the perfect focus in factory mode. how do I go to factory mode?
the tv won't perfect focus now it says check factory setting. my thought is it has to be done in factory mode before I can do it from the menu screen.
Similar threads
