AMIKO Amiko A3 not working

A

aerospecs

Thread Starter
Member
Dec 8, 2005
6
0
I have an amiko A3 receiver. It has quit working and will not boot up. I can unplug it then plug it in and at first I get and image for about 3 seconds or less then it disappears. When it completes booting I get a no signal message. I have tried different HDMI's and different televisions with the same results. Any suggestions would be appreciated.
 
primestar31

primestar31

SatelliteGuys Master
Lifetime Supporter
Mar 15, 2005
10,944
8,231
Beta Omicron Delta III
My best suggestion is to dump it, and get a supported receiver that won't have you pulling out your hair every 3 days.

This was orphaned a long time ago, and isn't worth fooling with anymore. It had potential, but they never supported it that well.
 
KE4EST

KE4EST

SatelliteGuys Is My Second Home
Staff member
HERE TO HELP YOU!
Lifetime Supporter
Aug 9, 2004
26,376
6,634
EM75xb
While it is unplugged, hold the button on the front and plug it back in while continuing to hold the button, until you get a recovery screen.
You may be able to reset it from there, of course you will have to restore your back up once complete.

Yes, it is sad that support for this unit dropped. That should get you going though until you can get something else.
I still use two in the kids rooms and have to do the above about every 6-8 months.
 

Similar threads

M
Replies
1
Views
1K
Titanium
Titanium
1
Replies
1
Views
887
KE4EST
KE4EST
rodder
Replies
5
Views
808
rodder
rodder
S
Replies
2
Views
785
solrackm
S
Top