Anybody own a Stab MS220 ?

Status
Please reply by conversation.
M

Mr Tony

SatelliteGuys Pro
Supporting Founder
Nov 17, 2003
335
91
Mankato, MN
looks like its designed to be used with a receiver that DOESNT have Diseqc 1.2

Most have that but I guess if you had a box like the Viacast that has no motor operation it would work for that ;)
 
ussexplroer

ussexplroer

SatelliteGuys Pro
Feb 17, 2007
272
4
looks interesting

The only thing I could think of using this for is if you had a receiver that didn't support usals or discq.

later,

Josh
 
oncewaslost

oncewaslost

Thread Starter
SatelliteGuys Pro
Feb 5, 2007
155
0
I was thinking about using it with a DVB card. I would really like to know if it requires a receiver or if it can act as a stand alone unit, supplying its own voltage. Also It says that it displays the rotor position. It drives me nuts that I get no feedback to tell me what the motor is actually doing.
 
Sadoun

Sadoun

SatelliteGuys Pro
Feb 27, 2005
2,320
1
Columbus, OHIO
I was thinking about using it with a DVB card. I would really like to know if it requires a receiver or if it can act as a stand alone unit, supplying its own voltage.?


No receiver needed. It supplies its own voltage and DiSQC commands to the motor.

The MS220 will require you to buy a 220V to 110V adapter from Radio Shack. It is a European version and they didn't have a NA version. With the power adapter, you should be all set.
 
oncewaslost

oncewaslost

Thread Starter
SatelliteGuys Pro
Feb 5, 2007
155
0
No receiver needed. It supplies its own voltage and DiSQC commands to the motor.

The MS220 will require you to buy a 220V to 110V adapter from Radio Shack. It is a European version and they didn't have a NA version. With the power adapter, you should be all set.


Thanks!
 
oncewaslost

oncewaslost

Thread Starter
SatelliteGuys Pro
Feb 5, 2007
155
0
No receiver needed. It supplies its own voltage and DiSQC commands to the motor.

The MS220 will require you to buy a 220V to 110V adapter from Radio Shack. It is a European version and they didn't have a NA version. With the power adapter, you should be all set.

Does it have USALS support also?
 
Sadoun

Sadoun

SatelliteGuys Pro
Feb 27, 2005
2,320
1
Columbus, OHIO
DiSEqC 1.2 only. USALS is a receiver feature so far and I haven't seen it incorporated into a positioner device.
 
Status
Please reply by conversation.

Similar threads

M
Replies
11
Views
2K
SatelliteAV
SatelliteAV
turbosat
  • Locked
Replies
17
Views
7K
Tron
M
  • Locked
Replies
5
Views
5K
Sadoun
Sadoun

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Top