BandStacked LNBF and Skew

Status
Please reply by conversation.

chapelrun

SatelliteGuys Pro
Original poster
Pub Member / Supporter
Feb 12, 2008
965
14
Berryville, VA
I just got an Aspen Eagle B1 Sat BandStacked C-Band LNBF for me little 5 foot Channel Master dish. Want to use this fixed on one Satellite.

I see the two pins set inside 90 degrees apart but how do I set the skew for this LNBF. I have never done BandStacked on a C-Band LNBF before.
 
reading material:

I had this info in my archive:

KB2KIR: Receiver settings for B1Sat Stack Lnbf
http://www.satelliteguys.us/c-band-...10746-receiver-settings-b1sat-stack-lnbf.html
OnceWasLost: how to orient the B1Sat
http://www.satelliteguys.us/c-band-satellite-discussion/142224-b1sat-stacked-c-band-lnbf.html
- couple more threads on the subject, recommended by Iceberg:
http://www.satelliteguys.us/c-band-satellite-discussion/152508-review-b1sat.html
http://www.satelliteguys.us/c-band-satellite-discussion/147673-2-c-band-lnbs-6-foot-dish.html


Or talk to Tron.
I think he's happily running one or two of 'em! - :up
 
I havent had one hooked up recently but the "flat" edge where the coax is should be at 0 degrees...flat should be horizontal

in the pic below the LNB (left one) is near 0 skew
 

Attachments

  • 000_0672.jpg
    000_0672.jpg
    108.2 KB · Views: 135
Status
Please reply by conversation.
***

Users Who Are Viewing This Thread (Total: 1, Members: 0, Guests: 1)

Who Read This Thread (Total Members: 1)