c band and ku band dish..to s9 receiver

[icu1954]

i have a dedicated c band dish that i love and would not take anything for...but i also have a 39 inch offset dish that i would like to run to my S9 receiver so i could pickup some ku reception...both will be run to my openbox S9.What type of switch would i need to run both lnb's to my S9...it seems simple but i need your help. thanks

 

[KE4EST]

You can just use a simple 4x1 switch. Though I prefer the Digiwave 8x1. You may not need all the inputs, but the switch will out last any 4x1 I've tried.

 

[KE4EST]

Here is a link: Switches

 

[icu1954]

does this switch...switch over from c band to ku band on it's on if you are using separate c and ku lnb's?

 

[KE4EST]

Yes you set it up in the s9 to which port which lnb is on.

 

[FaT Air]

I mounted a Ku offset right to the BUD Using a 22khz switch to select C or Ku. (there's also a diseqc switch to select some fixed Ku dishes)
http://www.satelliteguys.us/free-ai...-i-made-c-only-bud.html?highlight=Bud+play+Ku