Check this out. C-band Satellite dish w/ receivers (electronics)
Dish and receivers being sold in Chicago.
Not a bad deal.
Dish and receivers being sold in Chicago.
Not a bad deal.
C-Band Dish and receivers in Chicago priced low
- Thread starter jathan38
- Start date
- Latest activity Latest activity:
- Replies 4
- Views 1K
- Status
Well they did not say that was the diameter!
Looking at the photo and the way the dish is positioned... wide could mean from the feedhorn cover to the tail of the motor to some people!
Last edited:
Well they did not say that was the diameter!
Looking at the photo and the way the dish is positioned... wide could mean from the feedhorn cover to the tail of the motor to some people!
How very right you are.
In that case I am much longer then I previously thought
: Sorry Freudian slip
Last edited:
'taint THAT big:
If the dish is in decent condition, it's certainly worth $35 for an 8 or 10 foot mesh.
If you can use the feed & LNB that's a plus, but I would probably get a GeoSatPro C2 for C-band only.
If the motor works, great. If not, well... replacements aren't so expensive.
I'd run it with a Gbox if not on a 4DTV receiver.
Make sure you get enough of the pole so you don't need to jump through hoops planting it! -
If the dish is in decent condition, it's certainly worth $35 for an 8 or 10 foot mesh.
If you can use the feed & LNB that's a plus, but I would probably get a GeoSatPro C2 for C-band only.
If the motor works, great. If not, well... replacements aren't so expensive.
I'd run it with a Gbox if not on a 4DTV receiver.
Make sure you get enough of the pole so you don't need to jump through hoops planting it! -
- Status
Similar threads
