Hi All,
Here's an update.
I installed the new C1-PLL LNBF that KE4EST so generously gave me.
I installed it per directions indicating that I should set the "0" at the 12 or 6 o'clock posititon at highest part of the arc. I chose to put it at 12 o'clock.
After checking the polar (42 degrees) and declination (48.5 degrees) numbers using an inclinometer and my Stanley iphone level app,
I attached the C band coax and positioned it for 78W (3885V 22999) using another iphone app called Sat Scope. I moved it back and forth several times bit by bit using the positioner...nothing. I even tried moving it by hand...nothing. Each time waiting about 10 seconds for a lock. I'm only getting a signal from my microHD telling me I have an operating LNBF. I then tried 83W (4000V 29126)...nothing.
What should my settings for the microHD be ? I want to make sure I'm not missing anything there.
Thanks in advance.
John