Can FTA dish/LNB + DirecTV Receiver get 95 program ?

Status
Please reply by conversation.

xrf1

SatelliteGuys Family
Original poster
Dec 22, 2004
54
0
Hi,

Can somebody help me ? I am a rookie in this area !

I currently use a 30" (76cm) WineGard dish and a SamSung DSR 3700 receiver to watch FTA program in Telstar 5 (97W).

I also has a DirecTV receiver DSX 5350 from Phillips (I were a DirecTV subs, until 2 years ago, when I decided to switch to FTA).

Here is my case:
1) DirecTV offers SBTN (international language) program, which transmits from the Galaxy 3C in 95W.
2) I only want to subscibe to DirecTV Basic program (9.99$ basic fee + 14.99$ SBTN fee = 25$ total cost). And I don't need any other programs (like Total Choice, Preferred Choice, local, ...) at all (ie. I don't need 101, 119, ...).

My question is: Can I use the current 30" FTA disk + its LNB + the Phillips DSX5350 to get the SBTN channel (2072) ?

Here is what I tried so far:
0) I use the Winegard dish + its LNB (wideband ?) + the Phillips receiver (not the Samsung 3700, which I think only good for FTA).
1) My zip code is 85225 => Azimuth = 151 (ie. compass = 139) and Elevation = 47
2) On the Phillips receiver, installation screen, I pick transponder 15 (this is what LyngSat says reserved for SBTN).
3) I adjust the dish azimuth & elevation a lot, but signal strength is always zero !!

Does anybody know what I am wrong ?

Can mix and match (use FTA dish/LNB + DirecTV receiver) like what I did will work ?

What I suspect is that SBTN on transponder 15 is Hor. polarization, but the DirecTV receiver (which always works in LHCP or RHCP) doesn't know about this. So the voltage (13/18V) it sends out to the LNB is incorrect, the LNB confuses, and therefore no signal at all ??

BTW, I know DirecTV require the 36" disk to get the SBTN in 95, but I guess probably 30" is OK.

Hope your guys can help me out. Thanks a lot !
 
Call Directv and see what they will offer you to become a subscriber again you might be lucky and get a free install offer with a year commitment.
 
I did. They says if I select PreferChoice (39.99) and commit 1 year, I will get equipment & installation free.
If I select the Basic program (24.99/month), I have to pay 150 for equipment & installation.
Since I rarely watch sport/movie, I don't know why I should select the Preferred Choice package. I hope if somehow I can reuse my current stuffs (FTA dish/LNB/receiver and DirecTV dish/LNB/receiver), I can save a lot !
 
xrf
the dish will work. Its the receiver I'm worried about. You might want to call Direct or a retailer and ask if that receiver will work with 95 satellite

PLEASE LOG IN TO GET RID OF THESE ADS!
 
Your are right. They said the receiver is not compatible (???)

That's what I don't understand. Why I cannot connect the receiver to the PC, and download the upgrade, either from D* or Philips ?

Except if this is a hardware problem. Probably it is.

BTW, do you think I have to point the dish to (101+95)/2 = 98 to get both the 101 and Galaxy 3C ?

Thanks !
 
Status
Please reply by conversation.

"Officially" on D* now.

Baffled about D* install...

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Latest posts