Connection motor..?

[AndyCYXU]

Is this acceptable? for motor SG2100

RECV --- MOTOR --- DISEQ --- LNB (on motor dish)

|----------------------^
|
LNB
(ON non-MOTOR DISH) this is connected to DISEQ can't make better diag just above " ^ " (arrow)

REASON: one dish i have is fixed and i only have one reciver

Thanks

 

[brentb636]

Yes, That's an appropriate connection. You could, for example, feed the Diseqc switch from the lnbf on the motorized dish, and from 3 separate lnbf's on fixed dishes.



Brent

 

[AndyCYXU]

Thank You

I go buy me a motor then..

 

[AndyCYXU]

one more Q will anyone who has SG2100 does it fit on normal pole mount dish.. not u-bold.. not sure pole diammiter just normal pole ... ahh better measure it.. douh

 

[Mr Tony]

yep normal pole is fine...will accept between a 1 5/8" and I think 3" mast

PLEASE LOG IN TO GET RID OF THESE ADS!

 

[AndyCYXU]

Thank You