CW's on Gal 17 91W

[carlospr43]

Have anyone notice a lower in power of the CW's on gal 17 91W??? Used to get them with a medium size dish and conical but have lost them since the last 2 days. All other TPs I used to get are working fine. Tweak my dish and nothing. Or maybe have they change freq or SR??
Thanks

 

[GenBap]

I don't get the channels on my Openbox as they do not scan in, but the signal Q on the TP is 76%

 

[Diamond Jim]

I finally got around to entering them in my AZ Box Friday night and I was getting a signal of 100%. I'ver never seen a signal that high an any receiver I've owned.

I don't get the channels on my Openbox as they do not scan in, but the signal Q on the TP is 76%

The PIDs have to be entered manually. If you can do that on an Openbox, you can get them.

The PIDs are:
East V101, A102
West V201, A202
Central/Mountain V301, A302

 

[GenBap]

Thanks Jim. I will have to look into adding them. I think I have read how somewhere around here, but will have to find it again.

 

[phlatwound]

Thanks Jim. I will have to look into adding them. I think I have read how somewhere around here, but will have to find it again.

GenBap,

Check out the first post in this thread (link below), I think it's what you are looking for:

http://www.satelliteguys.us/free-air-fta-discussion/238731-how-use-editor-openbox-s9-hd.html

 

[Diamond Jim]

Thanks Jim. I will have to look into adding them. I think I have read how somewhere around here, but will have to find it again.

You're welcome. Good luck.