D10 System Test

[bjflynn05]

I just noticed on the system test on the D10 on of the things that it tests is the LNB Output. Does anyone knows what this is for because when I run the test the LNB Output fails everytime.

Thanks.

 

[shy007]

I think it's the D10 receiver failing.... I have a hughes and it says the LNB is fine but the D10 fails most of the time..... I would not be concerned....

If you think you need one, you can get one on ebay but I would not be concerned.....

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=32840&item=5775148382

 

[Loric]

I just noticed on the system test on the D10 on of the things that it tests is the LNB Output. Does anyone knows what this is for because when I run the test the LNB Output fails everytime.

Thanks.

The purpose of the LNB output test is to check that the LNB is responding to the commands sent by the receivers. A few LNB configurations are set and then the hardware is checked to verify that it has been configured according to the command. This is why a temporary loss of video occurs during that test.
At the moment, there may still be some software issues with that feature and it may not be fully functionnal.

 

[jamieh1]

ran the test on my D10 and the LNB test passed OK!

 

[jesserulz233]

ran the test on my D10 and the LNB test passed OK!

mine passed also