Diseqc Question

[iBoston]

Both receivers would need two satellite positions saved for each satellite. I.E. 99w Dish 1 and 99W Dish 2
Both receivers should assign and use the same DiSEqC 1.2 motor assignments for each satellite position.

I'm not sure if you answered this question.. You said set up two satellites for each position. One for each dish. Am i assuming correctly, you set up one of the positions with 22khz on, and the other with 22khz off...

 

[Titanium]

Correct!

 

[iBoston]

THANK YOU SO MUCH TITANIUM. YOU ROCK!