DiSEqC Switch and usals

[jmc98]

can you use usals for motor setup with a DiSEqC Switch

 

[brentb636]

Certainly, but I'd make sure the Diseqc switch is between the motor and lnbf's . I use Diseqc switches on both my motorized dishes. I also use a 22khz Ecoda switch between the receiver and motor, to switch in another fixed dish when necessary. Ecoda brand 22khz switches are the only ones that I know will work in this configuration.

 

[Mr Tony]

I had a diseqc setup with USALS and it worked just fine

Now some receivers wont work with both (motor and diseqc)

 

[Lak7]

Best setup:
Receiver------Motor-----DiSEqC----LNB