DishPro 34" & FSS LNB aimed @ 97

Status
Please reply by conversation.

acuevas

SatelliteGuys Guru
Original poster
Jun 11, 2009
132
0
Orange County
Hey All,

I understand above dish is usable for Galaxy 19( 97 sat ). I have aimed it already and I am coming up short. Any ideas will certainly help, thanks. ( see pics below - sorry not the best)
My settings for Brea, CA are: EL 44.6 / AZ 132.3 / SK -27.9R
 

Attachments

  • DSC03815.JPG
    DSC03815.JPG
    40.9 KB · Views: 225
  • DSC03816.JPG
    DSC03816.JPG
    17.6 KB · Views: 179
  • DSC03818.JPG
    DSC03818.JPG
    42.2 KB · Views: 192
  • DSC03821.JPG
    DSC03821.JPG
    44.7 KB · Views: 188
OK the settings are right but you need to select a VERTICAL transponder when aiming.

12177 V 23000 works well

bandstacked LNB's take the H side and "stack" them above the vertical so honestly the frequency wont be right on horizontal polarities..they will be higher

But otherwise it looks good for the settings
 
Thanks Iceberg,

Here I am trying to use a VERTICAL transponder, as you suggested, but I know I am not doing something right for I still get red bars.
 

Attachments

  • DSC03822.JPG
    DSC03822.JPG
    45.4 KB · Views: 158
The bars will turn green when you lock on the signal

Otherwise try a blind scan and see if you pick up any channels. Regardless of what sat you are on, the blind scan should pick up something
 
It looks like the LNB is on the stock setup just the covering is gone. Might just be that way due to the picture
 
Status
Please reply by conversation.
***

Users Who Are Viewing This Thread (Total: 1, Members: 0, Guests: 1)

Who Read This Thread (Total Members: 1)