Do you have the latest HD User Interface?

HDGUI on your Receivers/DVRs?


  • Total voters
    222
Status
Please reply by conversation.
Got the email last night about the new GUI coming out, whew I am glad they mentioned in the email that it was free :)
 
You're in the Savannah DMA if you live in the Savannah area.

Ah well, that's what I figured. Was being too hopeful I suppose. Looks like I'll have to look into doing the CE one of these weekends since Savannah isn't on any of the lists yet I don't want to wait over 3 weeks. My zip is 31419; does anyone have an extended rollout schedule that is different than the one posted on the DTV Tech/Installer forum?

PLEASE LOG IN TO GET RID OF THESE ADS!
 
Ah well, that's what I figured. Was being too hopeful I suppose. Looks like I'll have to look into doing the CE one of these weekends since Savannah isn't on any of the lists yet I don't want to wait over 3 weeks. My zip is 31419; does anyone have an extended rollout schedule that is different than the one posted on the DTV Tech/Installer forum?
We did our last HDGUI CC (0x057B/457B) the week before last and have move on to HR stuff. So if you are willing to risk your receiver and its contents, you are welcome to join us.

CC = Customer Candidate
HR = High Risk
 
We did our last HDGUI CC (0x057B/457B) the week before last and have move on to HR stuff. So if you are willing to risk your receiver and its contents, you are welcome to join us.

CC = Customer Candidate
HR = High Risk

Guess I'll be waiting then. I knew I should have grabbed it while it was marked CC, was too busy at the time...
 
Guess I'll be waiting then. I knew I should have grabbed it while it was marked CC, was too busy at the time...
Well you can try to grab the last CC (0x057B/0457B) when it is the stream during the wee hours, but I'm not sure you'll be successful when DirecTV is targeting DMAs.
 
Jimbo said:
You can get it tonight between 11pm and 2:30 am

Read here if you haven't already:

http://www.satelliteguys.us/directv-cutting-edge-ce-discussion-forum/149732-directv-cutting-edge-program-terms-faq.html

Why are you not getting your locals from Savannah ?

Thanks, but now that the Ce is under high risk, I'll just wait or try to force it one night when it's on the stream. I do get my locals from Savannah. But, since Atlanta gets the new software in the next couple of days, I was hoping I'd be limped in with them.

PLEASE LOG IN TO GET RID OF THESE ADS!
 
generix said:
Thanks, but now that the Ce is under high risk, I'll just wait or try to force it one night when it's on the stream. I do get my locals from Savannah. But, since Atlanta gets the new software in the next couple of days, I was hoping I'd be limped in with them.

*lumped in with them
 
You can get it tonight between 11pm and 2:30 am

Read here if you haven't already:

http://www.satelliteguys.us/directv...2-directv-cutting-edge-program-terms-faq.html

Why are you not getting your locals from Savannah ?
Right now as I type this, the Announcement Thread has not stated what type will be available tonight, but I strongly suspect it will be another High Risk.

The new HD NR should be back in stream early Monday morning at the earliest. Normally that 3 AM to 6 AM EST, but this past week the hours been whacky and not consistent.

==================================
It's a Moderated Risk
 
Last edited:
I am dl'ng 058D right now for HR24/100 :-)

PLEASE LOG IN TO GET RID OF THESE ADS!
 
I tried the CE on my HR24-200 and after it reset and downloaded there is now guide at all. The HR24 will not even change channels. Did I screw up. I will try again.
 
paychekkk said:
I tried the CE on my HR24-200 and after it reset and downloaded there is now guide at all. The HR24 will not even change channels. Did I screw up. I will try again.

What version was being dl'd?
 
Grabbed it for h24 700 on fri night, 0x58d and wow!

PLEASE LOG IN TO GET RID OF THESE ADS!
 
Status
Please reply by conversation.

Partial Recordings on HR24

Snow

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Latest posts