dtv stacked system

S

servicetech

New Member

Original poster

Nov 26, 2009

4

0

Gainesvile, FL

• Nov 26, 2009

• #1

dtv stacked system
one of the mdu's i service just received a new batch of d-12 100. the New Guided Setup & Installation Verification much different then in the past. i am unable to pull-up the diagnostic menu to change the lnb mode from unstacked to stacked. i would press the right arrow and active button at the same time, that would pull up the menu. dtv tech support had no idea?

 

A

AntAltMike

SatelliteGuys Pro

Aug 28, 2005

3,444

0

• Nov 26, 2009

• #2

It's hidden in a different place. I read about it in another forum a few days ago. I'll poke around a few of my other hang-outs and see if I can locate it.

 

A

AntAltMike

SatelliteGuys Pro

Aug 28, 2005

3,444

0

• Nov 26, 2009

• #3

Try this, from Randon Joe, a new member at DBSTalk:

D-12 Models
D12-500s (YMMV, but I suspect any D12 with the latest firmware from the factory will do this) require you to press [Right Arrow] + [Active] at the Language Select Screen, which is the very first screen of the configuration. Only on this screen can you reach the LNB Setup menu.

R-16 Models
R16-300s required a force download. From what I've heard, the download comes down off transponder 2. Even if you you are on a stacked signal (where the receiver would not normally see transponder 2) it will still complete a download. From there it is a similar setup; [Right Arrow] + [Active] at the Language Select screen.

Click to expand...

HOW TO: Change LNB setup for newest DTV firmware - DBSTalk.Com

 

S

servicetech

New Member

Original poster

Nov 26, 2009

4

0

Gainesvile, FL

• Nov 26, 2009

• #4

dtv stacked system
one of the mdu's i service just received a new batch of d-12 100. the New Guided Setup & Installation Verification much different then in the past. i am unable to pull-up the diagnostic menu to change the lnb mode from unstacked to stacked. i would press the right arrow and active button at the same time, that would pull up the menu. dtv tech support had no idea?

 

S

servicetech

New Member

Original poster

Nov 26, 2009

4

0

Gainesvile, FL

• Nov 26, 2009

• #5

dtv stacked system
one of the mdu's i service just received a new batch of d-12 100. the New Guided Setup & Installation Verification much different then in the past. i am unable to pull-up the diagnostic menu to change the lnb mode from unstacked to stacked. i would press the right arrow and active button at the same time, that would pull up the menu. dtv tech support had no idea?

 

rad

Supporting Founder

Supporting Founder

Lifetime Supporter

Cutting Edge

Sep 7, 2003

11,447

5,907

Dripping Springs, TX

• Nov 26, 2009

• #6

You could also try the installed forum over at Login to My Forum Profile to see if anyone there has your answer.

 

M

Mr Tony

SatelliteGuys Pro

Supporting Founder

Nov 17, 2003

1,944

7,717

Mankato, MN

• Nov 26, 2009

• #7

merged all your posts into one thread

DO NOT CREATE MULTIPLE POSTS OF THE SAME THING IN DIFFERENT AREAS

 

S

servicetech

New Member

Original poster

Nov 26, 2009

4

0

Gainesvile, FL

• Nov 26, 2009

• #8

thanks iceberg, wasn't sure where to post it.