i got a new wineguard dish system with a new lnb and i hit g28 with a 72 percent on abc news now.but problem is i got 565 other channels looks like all paid am i on 2 sats or what ?
g28 feeds
- Thread starter joem919
- Start date
- Latest activity Latest activity:
- Replies 8
- Views 2K
- Status
I'm going to guess that the "other" channels are from Nimiq1 at 91W, only 2 degrees away. It is possible that you could pick up some of the powerful , circular polarity tp's from 91W with your linear lnbf, if your blindscan wasn't limited to 11700-12200.
What receiver are you using ? I'm guessing that the blindscan frequency range default extends right through the 11700-12900 range, which would not only probably pick up Nimiq1 for you, but also take a lot longer than necessary to scan Galaxy 28 . Two of my receivers, an IV200 and a BUZZ Plus, both have the "too large" blindscan frequency range. You'll want to see if you can limit the scan range to 11700-12200 on your blindscans, to avoid this problem. I doubt anyone will re-write the firmware to make it easy.
What receiver are you using ? I'm guessing that the blindscan frequency range default extends right through the 11700-12900 range, which would not only probably pick up Nimiq1 for you, but also take a lot longer than necessary to scan Galaxy 28 . Two of my receivers, an IV200 and a BUZZ Plus, both have the "too large" blindscan frequency range. You'll want to see if you can limit the scan range to 11700-12200 on your blindscans, to avoid this problem. I doubt anyone will re-write the firmware to make it easy.
ok im getting transponders 11734 h at 4,500 and also 11781 h at 29.000 and 11760 and so on at 26000 brent i am editing this i just found out i am getting a byu channel and some abc news one feeds
Last edited:
I get 3 channels of the ABC mux, plus the BYU channel, which my Merc II calls "NorthAmericaBkup". Channel 304 and BTV-1 , BTV_4 round out the Galaxy 28 list from my last scan.
Your on 89 degrees West, you are probably also picking up the stronger transponders on the Nimiq 91 degrees West satellite.
i think im gonna switch over to the m11 also im still useing the pansat but have a m2 in the box need to open up
i switched over to my mercury 2 box and doing a power scan so far ive only gotten 3 transponders less then i had with the pansat
Scanning with the Merc right now
11760 V 26031
11919 V 30031
11954 V 19547
12008 V 5004
12158 V 30031
11734 H 4504
11780 H 29000
12055 H 6516
and a couple more Hughesnet TP's with sr=30031 .
11760 V 26031
11919 V 30031
11954 V 19547
12008 V 5004
12158 V 30031
11734 H 4504
11780 H 29000
12055 H 6516
and a couple more Hughesnet TP's with sr=30031 .
Hughesnet TP's seems to be what i get alot of also 1 of these days il get lucky enough to find a installer who can work wonders on the system
- Status
