geosatpro gs120 motor install?

Status
Please reply by conversation.

amc1

SatelliteGuys Pro
Original poster
im looking for install instructions ?i lost mine .i was having trouble last fall setting mine up so i gave up on it .now the weather is worming up on the rock
here(corner brook nfld canada)want to give it another try . also if the west and east slider limitswere set at 80 degrees would that gave me trouble ?
if i was on 101 west and want to go to 87 or 97 west the dish would move all the ways to the end of it limits to far?:confused:
 
Download a copy from the FTA Manual Area
http://www.satelliteguys.us/fta-manuals/92611-geosatpro-gs120-motor.html#post847612

You will not have any issues covering the slots between those two points. They are very close together and should move in a les than 5 seconds. The Hardware limits are adjustable to any point if you need a hardware limit. Many owners have removed the stops to allow even greater movement.
 
Status
Please reply by conversation.

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Top