I've been a regular here for the past few months reading everything about FTA, and finally took the leap, picked up a dish, a pansat motor and a PS3500s. (And finally registered here as a member) 
Now my problems...
I setup my dish, an ultrasat 30" model, and hooked up my motor.
The problem, and I have seen it a million times around here, is that I cannot get a signal. I checked to make sure everything is plumb, and found my true south using the solar method. Since I'm in Kingston Ontario, I think my true south sat is AMC5?? I am using a FSKU-V LNBF, and I have it set to STANDARD in the menu setup on the unit. Should it be set to something else? Single, etc?? Should 22 be enabled? I have tried to move the whole unit by hand to find other sats, and still no go. I unhooked my ExpressVu dish and hooked it up to the FTA dish in the hopes that I would find Bell with the FTA, as it puts out more power than the AMC birds. Still no go. So other than settings, could it be the LNBF? I have no trees, and my line of site is good from East to west. This is making me crazy! I hooked my Bell dish to the Pansat, and I can get good quality, but the new dish and LNB give nothing. As I said, I've manually rotated this thing from E-W, up and down a million times. NOTHING. lol. I have no hair left to pull out (been bald since 93. hehe.
From what I have read, the chances of the LNB being bad are pretty rare. Does the motor need to be plugged into the DisC switch, or can it go straight to the 3500?
Any help would be appp.

Now my problems...
I setup my dish, an ultrasat 30" model, and hooked up my motor.
The problem, and I have seen it a million times around here, is that I cannot get a signal. I checked to make sure everything is plumb, and found my true south using the solar method. Since I'm in Kingston Ontario, I think my true south sat is AMC5?? I am using a FSKU-V LNBF, and I have it set to STANDARD in the menu setup on the unit. Should it be set to something else? Single, etc?? Should 22 be enabled? I have tried to move the whole unit by hand to find other sats, and still no go. I unhooked my ExpressVu dish and hooked it up to the FTA dish in the hopes that I would find Bell with the FTA, as it puts out more power than the AMC birds. Still no go. So other than settings, could it be the LNBF? I have no trees, and my line of site is good from East to west. This is making me crazy! I hooked my Bell dish to the Pansat, and I can get good quality, but the new dish and LNB give nothing. As I said, I've manually rotated this thing from E-W, up and down a million times. NOTHING. lol. I have no hair left to pull out (been bald since 93. hehe.
From what I have read, the chances of the LNB being bad are pretty rare. Does the motor need to be plugged into the DisC switch, or can it go straight to the 3500?
Any help would be appp.