Is This a Valid LNB Configuration for Two Hopper 3?

[Bobby]

That's why it wouldn't be connected, because there's no functional use for it. Unless the switch check expects to see the 129 LNB and causes an error because it's not there. Which it sounds like it won't matter that 129 is not connected, check switch will be .

The software in the Hopper has been set to only look for 110 and 119. You are golden.

 

[John2021]

How do you have two H3s running off your LNBs (a WA hybrid?) and one Hybrid Solo Hub?

We have one hopper 3 running off our WA hybrid and 6 joeys when needed off of a solo hybrid with 2 3 way holland splitters is how dish set us up!!! to clear things up i wanted 7 hopper 3's and make em into one big media server but that can't be done so solid signal got a return!!!

i wonder if the dish and LNB can be bought yet of if only still for new installs.. everyone wants the new dish

 

[John2021]

Yes, I am sure. I had my dish replaced recently. The installer installed the old style Western Arc 1000.2 with three hybrid LNBs. I was shocked it worked.

That's how ours looks like except for the switch is the WA twin

 

[John2021]

That's why it wouldn't be connected, because there's no functional use for it. Unless the switch check expects to see the 129 LNB and causes an error because it's not there. Which it sounds like it won't matter that 129 is not connected, check switch will be .

Our hopper don't look for the 129!!! so the 3rd eye is just there for the ride along ..The eyes on the wa twin are a bit bigger than the old school LNB

 

[John2021]

Welcome and good luck

Any luck getting the new dish yet