Need Advice 4x1 switch

[Blue Crystal]

I mainly use a CW 800 receiver with 10ft BUD. Now also using second dish for KU and need at least a 4x1 switch, so I wont have to keep manually switching my coax from dish to dish.

Any recommendations for a compatible switch for my receiver?

 

[FTA4PA]

I mainly use a CW 800 receiver with 10ft BUD. Now also using second dish for KU and need at least a 4x1 switch, so I wont have to keep manually switching my coax from dish to dish.

Any recommendations for a compatible switch for my receiver?

The Chieta diseqc switches are heavy-duty and good quality (http://www.ebay.com/itm/HEAVY-DUTY-...1-SATELLITE-FTA-LNB-FREE-TO-AIR-/331188116707).

 

[Blue Crystal]

Thanks I will check it today

 

[jmc98]

I mainly use a CW 800 receiver with 10ft BUD. Now also using second dish for KU and need at least a 4x1 switch, so I wont have to keep manually switching my coax from dish to dish.

Any recommendations for a compatible switch for my receiver?

Another idea is an ecoda 22khz switch like this http://pages.ebay.com/link/?nav=item.view&alt=web&id=171100903622
depending on your setup now

 

[FaT Air]

I'd update that receiver as it's missing a LOT available on C band. Something like this that's DVB-S2 capable

 

[Blue Crystal]

Thanks,

I agree its time to update my receiver.
Also have an old psat 2500a that finds plenty transponders but wont load channels, so prob time to spend a few bucks.