Need Big Dish Service

  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
Status
Please reply by conversation.

purebill

New Member
Original poster
May 16, 2007
1
0
Can anyone recommend a knowledgeable technician for big dish service in San Bernardino, California area? My dish is parked at the full West limit and my DSR-922 will not move it East.
 
Sounds like maybe something has come loose or a wire has broken into. You can check and see if you can find a break? You could also take a 12 volt battery out to the actuator and see if it will move? If it moves, it's not the actuator. If it doesn't move, the actuator is probably bad? These are a couple of things you should be able to check yourself? Good Luck!

Al
 
Can anyone recommend a knowledgeable technician for big dish service in San Bernardino, California area? My dish is parked at the full West limit and my DSR-922 will not move it East.

Take a voltmeter and see if your getting a voltage for a second or so across M1 & 2 terminals when you tell it to move. If so you may want to try a master reset of the 4DTV this sometimes solves the problem. I know some MOV's also go in the 4DTV that will cause this problem.
 
Status
Please reply by conversation.

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Latest posts