Need someone to test something

[tvropro]

I need input... will someone with a 905 go over to W4 channel 501 and see what EMM providers show up. Or someone that did the conversion go to diagnostics A 4th line down see if the 3rd entry reads "0" or "1" This info is needed ASAP.

Thank's TvroPro

 

[migold]

TvroPro;
I have a 922, just finished getting the conversion done a couple hours ago. My Diag. A 4th line reads:
"0012001B00000000 FED4 0 1040 142 172 1"
I hope that helps.

 

[migold]

O!, I'm not on W4-501, I'm on X4-321...

 

[tvropro]

Try going to W4 501 and post that line in diagnostics. I'm mostly interested if after the FED4 its a "0" or "1"

 

[migold]

OK, will do, hold on...

 

[tvropro]

Thanks

 

[stargaze]

Try going to W4 501 and post that line in diagnostics. I'm mostly interested if after the FED4 its a "0" or "1"

it has a 1 there.

 

[migold]

TvroPro;
I'm on W4-501.
My Diag. A 4th line now reads:
"0012001B00000000 FED4 1 1040 41 0 1"

 

[tvropro]

it has a 1 there.

Thats on a converted unit?

 

[tvropro]

TvroPro;
I'm on W4-501.
My Diag. A 4th line now reads:
"0012001B00000000 FED4 1 1040 41 0 1"

Thank you. That proves it isn't in the new data stream. I heard it was active with 4160 I guess it was a rumor. It reads 1 on 4096 too so it's commercial only.

 

[migold]

Thanks, I learned something!

 

[tvropro]

Glad you learned something.

 

[stargaze]

Thats on a converted unit?

that's what you asked for in the original post.

 

[brex2001]

With my converted 905 I get a FE20 1 1040 on W4-501. EMM providers:2. Auth status MP.
W4-611: EMM 4096, 827. Hmmmmm.

 

[truckracer]

So is 4096 considered "commercial" stramonium now?

 

[tvropro]

4096 isn't commercial that I know of.