Openbox S9 power supply board?

Status
Please reply by conversation.

chadg2

SatelliteGuys Pro
Apr 2, 2006
623
42
Maiden Rock, WI
does anyone know where I can buy a openbox S9 internal power supply board? I have voltage problems and need to have one. Any help please?
 

chadg2

SatelliteGuys Pro
Apr 2, 2006
623
42
Maiden Rock, WI
back probed voltage out of power supply board and it's low on +24 and +12 like by 2 volts each one. My power at the LNBF is low on the +18V side it's like +16 and won't switch polarity's on my LNBF. I changed out my LM317T voltage regulator on the Main board and still have same problem. Any thoughts?
 

chaskuchar

SatelliteGuys Pro
Pub Member / Supporter
Apr 16, 2010
807
14
saint charles, missouri
i fixed my powersupply by replaceing a few electrolytics. when i looked at my power supply board there were three capacitors that had a bulged top. two were 1000mf/16v and one was 1000mf/25v. i replaced them all with 1000mf/25v. when i originally found the buldged tops i scrounged out two 1000mf/10v capacitors out of a computer power supply. those held up for a couple of months but finally gave me problems again so got the right ones in there now. i did change a 33mf/450v also but am not sure that it was a problem. just didn't like the leakage on the mother board from the capacitor. hope this helps. it's not hard to replace them or any others that you suspect might be a problem. charlie
 
Status
Please reply by conversation.

Birdview ad!

OpenBox Problems with Shutting receiver Off and ON(picture stays on}

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 4)

Top