The picture pixelates on all channels around every 2 minutes. It started around 2 weeks ago. How do I fix it?
Posted Via The FREE SatelliteGuys Reader App!
Posted Via The FREE SatelliteGuys Reader App!
Picture pixelate every 2 minutes
- Thread starter Dishusercan
- Start date
- Latest activity Latest activity:
- Replies 14
- Views 1K
-
ENJOY SATELLITEGUYS AD FREE THIS FEBRUARY!
Thank you to the very generous support we got from our members in December we have decided to make the month of February AD FREE for everyone!
We want to see the true speed of our site and enjoy SatelliteGuys the way it was meant to be enjoyed!
If you would like to help us keep the lights on and keep enjoying the site AD FREE consider becoming a PUB MEMBER by CLICKING HERE.
THANK YOU TO EVERYONE FOR YOUR SUPPORT!
Actually not so much a check switch, you already know you are getting the satellite. But go there and see what your signal strengths are and watch them for awhile not just a minute or two. See if they are fluctuating alot. Also be sure you really mean all channels. If not all channels see if the the ones affected are from the same satellite.
If all signals are good it could be a hard drive problem. Of course be sure all connections inside and out are good.
If all signals are good it could be a hard drive problem. Of course be sure all connections inside and out are good.
I had something like this a couple of years ago on a five year old Bell TV (Echostar) receiver; good signal, consistent pixelating every minute or two. Turns out in was bad capacitors. The only fix was replace the receiver or the capacitors.
It look likes only channels on 129w, the signal is around 35
Posted Via The FREE SatelliteGuys Reader App!
Posted Via The FREE SatelliteGuys Reader App!
and there is your problem. 35 is quite low and you might very well have tree leaves blocking your view....
Pixelation USUALLY means something is partially blocking signal. Most likely a tree. Even if there's no trees near the dish, it could still be one down the street, etc. The 129 sat is pretty low to the ground, usually around 25° or so. So think about a 45° angle from the dish too the sky, and cut that in half..
Something I see in spring often, besides tree branches flapping in the breeze in front of a signal, is water inside LNBs. In climates where it gets hot in summer and freezing in winter the lnb cover will sometimes crack and then you actually see water inside of it. Sometimes it looks like just droplets on the inside, other times its enough to look like a water bottle on its side. If you can access this dish, I'd look at the LNB (the eyes) and see if you can see moisture in there. The solution to this is easy, new LNB.
129 is quite far to the right of 110 and 119. I had the same problem and fixed it with a chainsaw.
bouncing signal is almost always tree related, especially if it started in late spring
from behind the dish, look down and to the right of where you think it is pointing
from behind the dish, look down and to the right of where you think it is pointing
