04-26-2006
HELP ME, please.
I purchased a Coolsat 5000 Platinum, 36" Fortec dish, LNB, HH90 Stab Motor. I have followed the direction for assembly of the HH 90 and Fortec 36" dish. Per instruction manual I have made assembly and the final assembly looks like the picture, This assembly per instruction manual and directions, I believe is incorrect.
Problem: It appears the motor will not turn the Dish from East coast to West coast.
It appears the motor will rotates the dish in a semi circle pattern moving the LNB bar from a zero South position to a rotated "up" position of a circle. The dish does not change from it's true South position. The motor makes the dish rotate the LNB bar from bottom of the dish to a position up left side of dish and when the motor changes direction the dish rotates back down to start position "0" meter position and then back up to the opposite side till motors end.
Is this what is intended? Is this correct?
Should the dish be moving from the "0" South toward the East coast of US and or moving from "0" South toward the West coast of the US? I have not activated the unit as yet and what I describe is what I see visually. I would appreciate a user of this type of equipment discribing the motor function of the HH90 and what they see as to dish movement.
Thank you,
jimmieb
HELP ME, please.
I purchased a Coolsat 5000 Platinum, 36" Fortec dish, LNB, HH90 Stab Motor. I have followed the direction for assembly of the HH 90 and Fortec 36" dish. Per instruction manual I have made assembly and the final assembly looks like the picture, This assembly per instruction manual and directions, I believe is incorrect.
Problem: It appears the motor will not turn the Dish from East coast to West coast.
It appears the motor will rotates the dish in a semi circle pattern moving the LNB bar from a zero South position to a rotated "up" position of a circle. The dish does not change from it's true South position. The motor makes the dish rotate the LNB bar from bottom of the dish to a position up left side of dish and when the motor changes direction the dish rotates back down to start position "0" meter position and then back up to the opposite side till motors end.
Is this what is intended? Is this correct?
Should the dish be moving from the "0" South toward the East coast of US and or moving from "0" South toward the West coast of the US? I have not activated the unit as yet and what I describe is what I see visually. I would appreciate a user of this type of equipment discribing the motor function of the HH90 and what they see as to dish movement.
Thank you,
jimmieb