Hello, I have a dsr920 and a 10' dish that I was using with a c band feedhorn and lnb. I bought a new c and ku feedhorn and lnb's but when I go to hook up the ku on the back of the dsr920 receiver my c band channels go out. I changed the setting on the receiver to dual c and ku setup. Any idea what is going on here? Thanks for any help.
problem getting ku on my big dish
- Thread starter regulator55
- Start date
- Latest activity Latest activity:
- Replies 2
- Views 1K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
- Status
I don't know what lnb's you have, but with my set up, I have lnb's and not lnbf's, and the setting is "C-Band and Ku-Band LNBs". Hope this will work. Good luck.
Al
Al
Hmm... Do you have separate coaxes for the C and Ku KNBs? If you have a short in the Ku coax, it might be pulling down the LNB source voltage such that it can no longer adequately source either LNB.regulator55 said:
- Status
