Question about NASA and Angel ONE

[chapelrun]

My setup gets both NASA and Angel ONE from 119W.

Just wondering way a blind scan finds each twice? Does DISH really have each channel twice on 119W or is one MPEG2 and another MPEG4. Both are viewable on my VisionSat IV-200

NASA

11868(V) 19995
10870(V) 19992

Angel ONE

11016(V) 19975
12014(V) 19978

 

[Mr Tony]

those frequencies are too low...should be in the 12000 range

 

[rv1pop]

those frequencies are too low...should be in the 12000 range

Question -- Am I right that the incorrect frequencies are probably a result of incorrect Local Oscilator settings?

 

[Smith P.]

It was your receiver's software bug; no MPEG-4 for those channels and if you look at those numbers you'll see a difference in a range of LOF standard deviation +/- 2...3 MHz.
Plus your LOF is incorrect, set it to 11250 MHz. Check Lyngsat site.

 

[Mr Tony]

correct RV1Pop....sounds like the op has it set for universal (9750/10600)...should be 11250

 

[Smith P.]

really ? hard to believe in that, especially after reading all posts here

 

[chapelrun]

OK - I understand

Thanks guys

You're right when I got to 119W I just took the defaults in the receiver

NASA should be 12370R TP11

Angel ONE should be 12516R TP12 according to LyngSat

I feel kinda stupid though - I rescanned with the correct setup and of course then the receiver found the correct Freqs.

 

[Mr Tony]

no worries