Reverse Band 3 LNB No signal 99 & 103 (1 Viewer)

Register Today to see less ads! It's Free!
Status
Please reply by conversation.

george99

Thread Starter
SatelliteGuys Pro
Dec 27, 2007
276
14
Thanks guys for the input.
Here are the full numbers:

99(ca)
1-8: ALL N/A
9-16: 73 54 73 52 75 55 71 49
17-24: 72 53 69 47 69 51 64 48
25-32: ALL N/A

99(cb)
1-8: 62 51 60 54 60 49 64 55
9-16: 65 53 65 53 68 49 NA NA
17-24: ALL N/A
25-32: ALL N/A

103(ca)
1-8: ALL N/A
9-16: 82 73 69 70 79 69 78 72
17-24: 77 69 81 72 79 70 83 75
25-32: ALL N/A


103(cb)
1-8: 83 77 80 75 80 74 82 75
9-16: 81 73 79 75 80 71 N/A N/A
17-24: ALL N/A
25-32: ALL N/A
 
Register Today to see less ads! It's Free!

raoul5788

Studebaker driver
Staff member
HERE TO HELP YOU!
Supporting Founder
Lifetime Supporter
Dec 28, 2004
30,491
14,129
Cheshire CT
Just needs to be aligned better. Check youtube for how to dither a dish without a meter.
 
Register Today to see less ads! It's Free!

texasbrit

SatelliteGuys Pro
Pub Member / Supporter
Apr 12, 2006
3,642
357
Yes, your 99 numbers in particular are much too low. Dish needs realigning.
 

george99

Thread Starter
SatelliteGuys Pro
Dec 27, 2007
276
14
Thanks.
I'll wait till after the hurricane is over. I'm probably gonna take the dish down anyway.
 

Jimbo

SatelliteGuys Master
Lifetime Supporter
Jul 14, 2005
63,973
4,262
NW Ohio - Buckeye Country
Self inflicted Problem " Had to remove Dish" to replace LNB = Miss-aligned Dish - Call the Man to re-align it
Typically, you don't have to do anything to change the LNB out, remove 2 bolts if thats the style you have, change cables out, put back together, re run Sat set up.
Usually if the dish is aligned well, you don't mess it up when replacing.
 

HoTat2

SatelliteGuys Pro
Jun 12, 2012
1,284
328
Los Angeles, CA.
Typically, you don't have to do anything to change the LNB out, remove 2 bolts if thats the style you have, change cables out, put back together, re run Sat set up.
Usually if the dish is aligned well, you don't mess it up when replacing.
Yep, although I'd just go slightly beyond the brevity of your statement to add the details of ...

"Typically, you don't have to do anything to change the LNB out, first make sure all bolts on dish mount are tight, cut zip-tie off coax service/drip loop, remove 2 bolts if thats the style you have, change LNB out, put back together, reform service/drip loop and secure it with new zip-tie, re-run sat set up."
 
  • Like
Reactions: Jimbo
Register Today to see less ads! It's Free!
Status
Please reply by conversation.

Users who are viewing this thread

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Latest posts

Top