i'm using a !.2 m dish for Shaw Direct and starting to lose the channels that are being converted. The receiver is a DSR317. What I am wondering is if I can keep the same dish but upgrade to the new Quad Three LNB and an HD receiver (605)? Anyone tried this?
Shaw Direct with 1.2 m dish
- Thread starter NorteDave
- Start date
- Latest activity Latest activity:
- Replies 3
- Views 2K
Register to hide this ad
Hey, what's up! Are you using the dual quad lnb? Can you take a photo of your dish?
Sent from my iPhone using the SatelliteGuys app!
Sent from my iPhone using the SatelliteGuys app!
Problems is that channels are being taken out from Anik F1 and F2 to G1, and G1's footprint does not reach Mexico, therefore for that case the dish size, the LNB's and receiver are irrelevant.
I unsuscribed from Shaw because of that.
Not really, the channels are going from Mpeg 2 to Mpeg 4 which only the newer 600 and 800 receivers will pick up. They have actually taken the BC channels off G1 and moved them to F2 for the snowbirds so when they cut the SD channels they will still receive them down south.
So even in Canada people are losing more and more channels as the conversion takes place. Everyone needs a new receiver and lnb or they will continue to lose channels which should be complete by 2019. All HD and No more SD channels.
You do need an elliptical dish for the new XKU lnb, so I do not believe it will work on your 1.2 meter dish. A 75cm dish works fine even in Mexico where my father-in-law resides.
So even in Canada people are losing more and more channels as the conversion takes place. Everyone needs a new receiver and lnb or they will continue to lose channels which should be complete by 2019. All HD and No more SD channels.
You do need an elliptical dish for the new XKU lnb, so I do not believe it will work on your 1.2 meter dish. A 75cm dish works fine even in Mexico where my father-in-law resides.
