Help, I have a new hughes receiver (director pack) and a new dish (terk 3 LNB oval). I hook up the dish to a 4 foot cable for testing and get 92 % signal, then I run a 50 foot line and I get 0 %. I have tried 3 different cables nothing. Please anyone, anyone???
Signal no signal
- Thread starter fitz11
- Start date
- Latest activity Latest activity:
- Replies 3
- Views 2K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
- Status
What else is changing besides the 50' cable are you adding a switch, ground block, connector, something besides the cable is causing a short.
50' Store bought
If the 50 foot cable is store bought I suggest you make your own,the wire may not be concisent through the total length. I make my own,and a few for friends.They are much better,get the Zenith F connectors,quad shield RG6,and the crimping tool from Lowes and go to work,
If the 50 foot cable is store bought I suggest you make your own,the wire may not be concisent through the total length. I make my own,and a few for friends.They are much better,get the Zenith F connectors,quad shield RG6,and the crimping tool from Lowes and go to work,
- Status
