Software 0X395 USB Problem

[husker_pick]

I have an HR21/700 with an AM21 OTA receiver that is getting lost signal problems ever since the new release. If I pull the USB plug and reconnect it comes right back.

Anyone else having this problem? My OTA was always rock steady before the upgrade. I wonder if it's related?

Steve

 

[jdspencer]

Have you tried to power down the AM21 and then power it on and then plug the USB cable in?
Or any number of combinations like this.

 

[husker_pick]

Have you tried to power down the AM21 and then power it on and then plug the USB cable in?
Or any number of combinations like this.

I haven't tried pulling the power plug but just pulling the usb from the back of the DVR and replugging it makes the DVR say it found it. I guess Ill do a complete reboot on both. I sort of thought it's acting like a computer that lost its connection to a usb device would except more "Linuxy"

 

[jdspencer]

So I received the AM21 today and connected it to my HR23. It's working well with the exception that the guide is quite a bit slower than usual. The guide looks like it has been populated, but then it may still be indexing it. Time will tell.