Software 0X395 USB Problem

Status
Please reply by conversation.

husker_pick

Member
Original poster
Jul 14, 2007
11
0
Stannard, VT
I have an HR21/700 with an AM21 OTA receiver that is getting lost signal problems ever since the new release. If I pull the USB plug and reconnect it comes right back.

Anyone else having this problem? My OTA was always rock steady before the upgrade. I wonder if it's related?

Steve
 
Last edited:
Have you tried to power down the AM21 and then power it on and then plug the USB cable in?
Or any number of combinations like this.
 
Have you tried to power down the AM21 and then power it on and then plug the USB cable in?
Or any number of combinations like this.

I haven't tried pulling the power plug but just pulling the usb from the back of the DVR and replugging it makes the DVR say it found it. I guess Ill do a complete reboot on both. I sort of thought it's acting like a computer that lost its connection to a usb device would except more "Linuxy" :)
 
So I received the AM21 today and connected it to my HR23. It's working well with the exception that the guide is quite a bit slower than usual. The guide looks like it has been populated, but then it may still be indexing it. Time will tell.
 
Status
Please reply by conversation.
***

Users Who Are Viewing This Thread (Total: 1, Members: 0, Guests: 1)

Who Read This Thread (Total Members: 1)

Latest posts